Augmentation of LWSS Badwal Ansoli and Matour in Tehsil and District Kangra H.P.

Excavation in foundations,trenches etc in earth work in all kind of soil, such as pick work, jumper work, blasting hard or soft rock by chiselling where the blasting work is prohibited slushy daldal and saturated soil including pumping or bailing out water with in all heights, stacking the excavated soil within all leads clear from the edge of excavation and then returning the stacked soil in 15cm(fifteen centimetres) layers, when required into plinths, sides of foundations etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth, as per the direction of Engineer-in-Charge with in all leads and lifts.

Providing and laying Cement concrete 1:6:12 (1 Cement:6 Sand:12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth complete in all respect including all leads and lifts.

Random rubble masonry/polygenal rubbe masonry ( un-coursed/bright to courses) with hard stone of approved quality in foundation and plinth including levelling up with C.M 1:6:12 (1cement:6 sand :12 graded stone aggregate 20mm nominal size) in CM 1:6 (1cement: 6sand in breast wall & retaining walls complete in all respect including all leads and lifts.

Ist class Brick work using common burnt clay building bricks in super structure above plinth level upto floor two level in cement mortor 1:6 (1cement:6sand), with in all leads and lifts.

Providing wood work in frames of doors, windows,clerestory windows and other frames wrought ,framed & fixed in position :1st class Deodar wood in all respect i/c all leads & lifts. as per the direction and satisfection of the Engineer in charge.

Providing 40x3mm flat iron hold fasts 40cm long i/c fixing to frames with 10mm. diameter bolts nuts and wooden plugs and embedding in cement concrete block 30x10x15 cm in CC 1:3:6 (1cement:3sand: 6 graded stone aggregate 20mm nominal size) complete in all respect with in all leads and lifts.

Flat surfaces such as soffits of sunspended floor, roofs landings and the like floors etc upto 200mm thickness.

Beams,cantilevers,girders & lintels etc. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 mtrs. In depth in all heights from floor complete in all respect including all leads and lifts.

Edges of slab and breaks in floor and walls under 20cm wide