Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.7 LAccepted-AOC B 39 UPPER GROUND FATEH NAGAR NEW DELHI 110018 | WEST | DELHI | 110018 | L1 | Accepted-AOC ACCEPTED BEING LOWEST QUOTED | |
| 2 | L2₹26.0 L+₹1.5 L (6.09%)Rejected-AOC 121 MADHAV SQUAR OPP AVANTIKA COMPLEX LIMDA LANE JAMNAGAR 361001 | JAMNAGAR | GUJARAT | 361001 | L2 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED | |
| 3 | L3₹27.2 L+₹2.7 L (11.1%)Rejected-AOC 274 210 DAFNALA ROAD SHAHIBAUG AHMEDABAD GUJARAT 380009 | AHMADABAD | GUJARAT | 380009 | L3 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED | |
| 4 | L4₹27.5 L+₹3.1 L (12.5%)Rejected-AOC | L4 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED |
Tender Value
Refer Docs
EMD Value
₹49,200
Closing Date
11 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY GANDHINAGAR
GE GANDHINAGAR PO BSF CAMPUS GANDHINAGAR 382045
SPL REPAIR REPLACEMENT OF CONVENTION TYPE GARDED LIGHT ADDN ALTN OF OLD SUPPLY LINE AND PROVN OF PROVN OF 17 DESERT COOLERS AT MIL STN DHRANGADHRA
2022_MES_552928_1
GE(A)/GNR/TOKEN/62 of 2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
90 days
MIL STN DHRANGADHRA
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
GE ARMY GANDHINAGAR
₹49,200
Yes
24 Nov 2022
19 Sept 2022
13 Oct 2022
19 Sept 2022
11 Oct 2022
29 Sept 2022
19 Sept 2022 - 27 Sept 2022
Amount
M&L for excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth, for foundation, etc in hard/dense soil and getting out complete all as specified and directed.
M&L, returning, filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation all as specified and directed.
M&L for providing dry river sand as in sand cushioning to UG cable including punning gently all as directed. Note : Depth after punning shall be measured and paid.
M&L, removing excavated material (Soil) not exc 50 mtr and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.
M&L for PCC 1:2:4 type C-2 using 20mm graded stone aggregate for road, cutting path etc. complete all as specified and directed.
M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundtion of pole/stay assembly etc including necessary form work, all as specified and directed.
M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for padestal/coping around poles, including necessary form work, finishing even and smooth without using extra cement, all as specified and directed.
Supply and laying sub class old 'B' burnt bricks laid as cable protection cover complete all as specified and directed.
Supply and fixing path directional reflector with PC diffuser and aluminium power coated bollard provided uniform illumination for pathways LED type 5watt 230 watt volts AC outdoor type with decorativepost for 360 degree indirect light IP 65 protectionwith impact and corrosion resistant complete withdriver and lamp including taking down old one complete complete.Make Havells/ Bajaj/Chrompton /wipro / Philips
S&F, in repair, FRP insulated and PVC sheathed copper conductor cable of size 1.5 Sqmm, 3 core, 1100 volts grade, multistranded, passing throuth existing pipe, fixed on pole/wall from juntion box to street light fitting complete all as specified and directed.
M&L for road cutting for laying of GI pipe 40 mm dia and making good to match the surface as existing road complete all as sepcified and directed.
Taking down old unserviceable 100mm bore, CI/DI/MS water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.
S&F, in repair, GI pipe, 40mm bore, light grade, laid below road/fixed along the poles / walls with necessary clamping, etc complete all as per specified and directed.
Supplying & laying, XLPE insulated PVC inner sheathed, 4 Sqmm, 2 core, armoured with galvanised steel strip or wire heavy duty underground cable with aluminium multi stranded conductor, 1100 volt grade, laid in trenches/duct, passing through pipe/duct or fixed on pole and connecting and testing complete all as specified and directed.
S&F, and testing, ductile iron pipe of size 150mm bore with spigot and socket ends, suitable for tytan joints, Class K-9, laid in trenches, or under floor or fixed to walls complete all as specified and directed.
Supply and fix Rubber tyton joints suitable for DI pipes 150 mm dia and fittings complete all specified and directed.
M&L for DI Specials and fittinng class K-12 as per IS for spigot and socketed DI pipes for water mains, branches, links such as bends (any type), reducers and angles, tappers any type, bends increasing/ decreasing or double sockets etc. cutting of existing pipe line and joints of new Tee pieces, single branches, double branches (all socket and spigots) collers, cap and plug suitable for pipe lines upto 250 mm bore complete all as specified and directed.
S&F, cast iron sluice valve 150 mm dia with flanged ends class PN-1.6 with iron wheel, stainless steel spindle and check nut confirming to IS :780 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed .
S&F, CI air release valve with two air outlets 50mm dia bore including necessary nut bolts and gasket for inserting in 150mm bore of pipe complete all as specified and directed.
M&L for construction of valve pit of size 1200mm X 1200mm X 900mm, consisisting of 230mm thick, old size brick masonry wall in cement mortar (1:6), PCC (1:4:8) type D2, using 40mm graded stone aggregete as in fondation, PCC (1:2:4) type B1, using 20mm graded stone aggregete in coping/bed, finished even and smooth, rendering 15mm thick in cement mortar (1:6) internally and 10mm thick in cement mortar (1:4) externally, finished even and smooth without using extra cement incuding three coats of white wash and earth work in any type of soil and including 3mm thick MS sheet cover fixed on 40mmx40mmx6mm thick angle iron frame ambeded in PCC coping with locking arrangement and mild steel hold fast & handle and duly painted with two coats of synthetic enamel paint over one coat of primer etc. complete all as shown on drawing NO TD/2004/26 Sh 1/1 to 1/3 and as specified and directed.
Supply of steel body evaporative Duct Type desert cooler with fan motor (ISI marked to IS 996 latest), fan blade of 430mm sweep of aluminum material, 1400 RMP for 2000 cum/hr nominal air capacity,3 Speed Control, wood wool filter pads of thickness size is 15mm or above with non-corrosive wire guard for filter pads, float valve at the inlet, submersible pump , the material of filter panel, grill, top of the cooler body is made of galvanized steel sheet of thickness not less than 0.8mm and sump/water tank of 80 liters capacity including sheet thickness not less than 1.00mm with zinc coating not less than 100 gms/sq.meter and all internal surface of steel body painted with water-resistant paint to IS 9862 latest and brass/ss material drain 3 pin molded plug top of 5/6 amps plug ISI marked, 230 Volts, 50Hz, connecting cable with, commissioning complete all as specified and directed.
SURESH ELECTRICALS
ALBA AC AND REF SERVICES
Singh Engineer And Contractor
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .