M & R to Bhanasimal PArt-1, 2 and MAchhalanala RWSS

Name Of Work : Supply, Installation, Testing & Commissioning of three phase

submersible pump set and other accessories at Intakewell/ Main HW under

Bhanasimal Part-1, Part-2 & Machhalnala RWSS DIST. DAHOD

Executive Engineer,

Public Health Mechanical Division,

Gujarat Water Supply & Sewerage Board,

Jalbhavan. 2nd Floor, Opp. LIC Office

Name Of Work :- Supply, Installation, Testing & Commissioning of three phase submersible pump set and

other accessories at Intakewell/ Main HW under Bhanasimal Part-1, Part-2 & Machhanala

RWSS DIST. DAHOD

Schedule showing the material to be supplied from the store of Guj. W/s. & Sewerage Board for the work

contracted to be executed at the rates at which they are to be charged.

Sr. No. Particulars Qty. Rate Rs. Unit Place of

Delivery Delivery

(1) The persons of firm submitting the Tender should see that rates in the above schedule are filled up by

the Executive Engineer, on the issue of form prior to the submission of the Tender.

(2) Materials which are not included in Schedule 'A' but required for the work shall be brought by the

Contractor at his own cost.

(3) Carting of above materials should be done by contractor at his own cost.

(4) Contractor should return the balance materials, otherwise recovery at the double rates will be

affected in view of Clause 12.4.

Signature of Contractor Executive Engineer,

P.H.Mechanical Divn.

[Volume V: Price-Bid] Page

Name of Work :- Supply, Installation, Testing & Commissioning of three phase submersible pump set and

other accessories at Intakewell/ Main HW under Bhanasimal Part-1, Part-2 & Machhanala

RWSS DIST. DAHOD

Item Description Qty. Unit Rate Amount Rs.

1.1 Submersible Pump 3 Set 3,37,590.00

S.I.T.C. of approved make three

phase submersible pump set with

electrical motor driven pump

confirming to IS 8034 and motor

confirming to IS 9283 working at

phase 400/440 Volt 50 C/S. A.C.

supply and 2900 R.P.M. to be

installed inclined at 45 degree in

sump with necessary stand and MOC

mentioned in tech specification as

A) At main HW (For Santrampur/

Padaliya/ Fatehpura Section)

Duty Point :- Q- 3000 LPM, Head-125

Mtr., Minimum- 150 HP

1.2 B) At Kaliya HW (Nava Talav Section) - 1 Set 1,69,521.00

Bhanasimal -1 RWSS

Duty Point :- Q- 1700 LPM, Head-98

Mtr., Minimum- 60 HP

1.3 C) At Kaliya SHW (Mor Mhudi Section) 1 Set 1,69,521.00

- - Bhanasimal -1 RWSS

Duty Point :- Q- 2010 LPM, Head-84

Mtr., Minimum- 60 HP

1.4 D) At Kaliya SHW (Fatepura Section) - 1 Set 1,39,172.00

Bhanasimal -1 RWSS

Duty Point :- Q- 2400 LPM, Head-42

Mtr., Minimum- 40 HP

1.5 E) At Padaliya SHW (Fatepura 1 Set 88,325.00

Section) - Bhanasimal -2 RWSS

Duty Point :- Q- 1080 LPM, Head-34

Mtr., Minimum- 15 HP

1.6 F) At Padaliya SHW (Sump to 2 Set 1,94,568.00

Sagdapada) - Bhanasimal -2 RWSS

Duty Point :- Q- 1820 LPM, Head-116

Mtr., Minimum- 75 HP

1.7 G) At Sampoi MHW (Sump to 1 Set 2,32,712.00

Rangalighati Section)-Machhalanala

Duty Point :- Q- 3240 LPM, Head-64

Mtr., Minimum- 72 HP

[Volume V: Price-Bid] Page

Item Description Qty. Unit Rate Amount Rs.

2.1 Dismentling of Existing Pumping 3 Set 27,930.00

machinery with accessories

a) 125 KW SCF pump with all

accessories at Main HW

2.2 b) 30 KW HSCF pump with all 1 Set 3,125.00

accessories at Kaliya SHW

2.3 c) 45 KW HSCF pump with all 1 Set 6,250.00

accessories at Kaliya SHW

2.4 d) 90 KW HSCF pump with all 1 Set 9,375.00

accessories at Kaliya SHW

2.5 e) 132 KW HSCF pump with all 1 Set 9,375.00

accessories at Padliya SHW

2.6 f) 15 KW HSCF pump with all 1 Set 3,125.00

accessories at Padliya SHW

2.7 g) 55 KW HSCF pump with all 1 Set 6,250.00

accessories at Sampoi HW

3.1 Providing and supplying ISI mark G. I. 210 Mtr 1,279.15

pipes with Couplings of following

class and diameter including all

taxes, insurance, transportation,

freight charges, octroi, inspection

charges, loading, unloading,

conveyance to departmental stores,

stacking etc. complete. (IS -1239)

(Not for well/tube well column pipe)

a) Heavy Duty 125 mm G.I Heavy

duty pipe for Delivery

( Bhanasimal main HW - 60 Mts +

Kaliya SHW - 90 Mt + Padaliya SHW -

30 Mt + Sampoi SHW - 30 Mts)

3.2 b) Heavy Duty 100 mm G.I Heavy 30 Mtr 1,027.70

duty pipe for Delivery ( Padaliya

4 M.S. SPECIALS: 3000 Kgs. 98.00

Erection, Installation, Testing &

Commissioning of M.S. Specials for

Delivery & Header Piping with

Flanges, eccentric Nozzles, Nut-

Bolts, Y -tee connection etc.

Complete) plain & socket ends Up to

300 mm. dia.with flanged ends .

[Volume V: Price-Bid] Page

Item Description Qty. Unit Rate Amount Rs.

5.1 Supply, testing & commissioning of 9 No. 4,320.00

flange ends Expansion Bellow as per

EJMA standards of overall length of

minimum 300 mm, designed for

mm axial compression and 5 mm

axial extension with tie rods etc. of

following MOC & pressure

ratings.MOC: Bellows: SA 240 Gr.

304; Internal Sleeve: SA 240 Gr. 304;

Weldends: IS 2062 Gr. B; Flanges: IS

2062 Gr. B (Drilling as per IS 1538 /IS

6392 ) & Limit Rods & Nuts: CS - IS

1367.PN - 1.6 on a)(a) On Delivery

Pipe of 125 mm NB of PN-1.6 (

Bhanasimal main HW - 03 + Kaliya

SHW - 03 + Padaliya SHW - 03 +

Sampoi SHW - 01)

5.2 (b) On Delivery Pipe of 100 mm NB 1 No. 3,600.00

of PN-1.6 ( For padaliya SHW)

6.1 Supply, testing & commissioning of 9 No. 3,815.95

ISI mark CI D/F Butter Fly Valve as per

IS:13095 (Latest Edition) of following

class and diameter including all

taxes, insurance, transportation,

freight charges, octroi, inspection

charges, loading, unloading,

conveyance to departmental stores,

stacking etc. complete. PN-1.6

IS:13095 with ISI mark.

(a) On Delivery Pipe of 125 mm NB

( Bhanasimal main HW - 03 + Kaliya

SHW - 03 + Padaliya SHW - 02 +

Sampoi SHW - 01)

6.2 (b) On Delivery Pipe of 100 mm NB 1 No. 3,130.95

of PN-1.6 ( For padaliya SHW)

7.1 Providing and supplying ISI mark CI 9 No. 7,529.95

D/F Reflux Valves as per IS:5312

(Latest Edition) of following class and

diameter including all taxes,

insurance, transportation, freight

charges, octroi, inspection charges,

loading, unloading, conveyance to

departmental stores, stacking etc.

complete,Reflux valves PN 1.6 IS

5312 with ISI mark.

(a) On Delivery Pipe of 125 mm NB

( Bhanasimal main HW - 03 + Kaliya

[Volume V: Price-Bid] Page

Item Description Qty. Unit Rate Amount Rs.

SHW - 03 + Padaliya SHW - 02 +

Sampoi SHW - 01)

7.2 (b) On Delivery Pipe of 100 mm NB 1 No 6,023.95

of PN-1.6 ( For padaliya SHW)

8 Design, Supply, Installation, Testing, 10 No 1,412.00

Commissioning of Bourdon Type

Pressure Gauge, ±1% accuracy,

Direct bottom 1/2" NPT (M) process

connection, IP 67, Glycerine filled,

SS304 Case with Bayonet Type Bezel,

SS316 L Bourdon Tube, SS

Movement material, Aluminium dial

with black graduation on white

background, Micro Zero adjustable

pointer, neoprene gasket, Blow out

disc, shatter proof glass, SS tag plate

etc as per IS 3624. 150 mm Dial

Size,0 to 20 Kg/cm2 ( Bhanasimal

main HW - 03 + Kaliya SHW - 03 +

Padaliya SHW - 03 + Sampoi SHW -

9 C.C. Work in 1:2:4 for pipe & valve 40 Cu. 3,903.39

support & Thrust block: Mtr.

Providing and laying cement concrete

work 1:2:4 (1 Cement, 2 Coarse sand,

4 Graded stone aggregate 20mm

nominal size) and curing comp. excl.

cost of form work and reinforcement

for reinforced concrete work in

foundations,footings base of columns

and mass concrete (upto 10 ton)... (

For valve support & thrust block)

( 20 Cum for MAin HW & 20 Cum for

(B) ELECTRICAL SECTION

10 Supply, Installation, testing & 1 No. 11,119.00

Commissioning of Star Delta starter

suitable for local & remote pump

control application consisting of

MPCB, overload relay and contactors

as per Type II coordination including

digital voltmeter, analogue ammeter

with selector switch, run hour meter,

required protective relays & control

accessories etc. .......... 11-15 HP

(S/D) for Padaliya SHW (Padaliya to

[Volume V: Price-Bid] Page

Item Description Qty. Unit Rate Amount Rs.

11 Supply, Installation, testing & 1 No. 33,403.00

Commissioning of Auto transformer

starter suitable for local & remote

pump control application consisting

of Auto Transformer (vacuum

impregnated, air cooled having three

(3) tappings at 50%, 65% and 80%),

incomer MCCB / MPCB, overload

relay and contactors as per Type II

coordination including digital MFM

with RS 485 communication port,

analogue type ammeter with selector

switch, run hour meter, required

protective relays & control

a) A. T. S. from 36 to 45 HP ( Kaliya

SHW) (Fatepura Section)

11 b) A. T. S. from 51 to 60 HP (Kaliya 2 No. 46,238.00

SHW) (Navatalav & Mormahudi

11 c) A. T. S. from 71 to 80 HP (Padaliya 3 No. 65,760.00

12 Supply, Installation, testing & 3 No. 2,71,936.00

Commissioning of Microprocessor

based soft starter, fully automatic

415 V suitable for local & remote

pump control application consisting

of incomer MCCB of suitable rating,

semi conductor fuses,

microprocessor based soft starter

with built in by pass arrangement

(conforming to IS/ IEC 60947-4-1-2-3)

with RS 485 communication port,

external display unit with keypad

including temperature scanner with

minimum 10 channels - suitable for

accepting RTD (Pt 100) / thermister

inputs, digital MFM with RS

communication port, analogue type

ammeter with selector switch, run

hour meter, required protective relays

& control accessories.

(A) MP based soft starter from from

141 to 150 HP ( For Main HW)

[Volume V: Price-Bid] Page

Item Description Qty. Unit Rate Amount Rs.

13 PVC CABLES 240 Mtr 731.00

Supply, laying, testing &

commissioning PVC insulated round

submersible cable as per detailed

technical specifications conforming

to IS 694, IEC 60227 /

a) 3 C x 35 sq.mm ( Main HW)

13 b) 3 C x 16 sq.mm (Kaliya SHW - 120 300 Mtr 324.00

Mt +Padaliya SHW-120 Mt + Sampoi

13 c) 3 C x 10 sq.mm (Kaliya SHW - 60 Mt 120 Mtr 230.00

+Padaliya SHW-60 Mt)

14 Supply, laying, testing & 90 Mtr 1,634.00

commissioning of 1.1 kV grade, XLPE

insulated, stranded Copper

conductor, galvanised steel flat strip /

round wire armoured, extruded PVC

type ST2 sheathed, heavy duty cable

(to be laid on wall surface with

necessary clamps / in existing cable

trench / cable trays / conduit / pipe

sleeves at road crossing or floor as

per site requirement) conforming to

IS: 7098 (Part-1) & IEC:60502 (Part-1)

a) 3.5 C x 70 sq.mm (Main HW)

14 b) 3.5 C x 35 Sq.mm (Kaliya SHW - 30 150 Mtr 836.00

Mt +Padaliya SHW-30 Mt + Sampoi

14 c) 3.5 C x 25 sq.mm (Kaliya SHW - 30 60 Mtr 641.00

Mt +Padaliya SHW-30 Mt)

15 MEDIUM VOLTAGE AL. CABLES'Supply, 100 Mt. 1,211.00

laying, testing & commissioning 1.1 kV

grade, XLPE insulated, stranded

Aluminium conductor, galvanised steel

flat strip / round wire armoured,

extruded PVC type ST2 sheathed, heavy

duty cable (to be laid on wall surface

with necessary clamps / in existing

cable trench / cable trays / conduit /

pipe sleeves at road crossing or floor as

per site requirement) conforming to

IS:7098 (Part-1) & IEC:60502 (Part-1) of

following sizes:'b) 3.5 c x 400 sq.mm. AL

XLPE Armoured (For Transformer to

MCCC Panel, Inter MCC Panel, Panel to

APFC Panel at MHW)

[Volume V: Price-Bid] Page

Item Description Qty. Unit Rate Amount Rs.

16 Cable Glands: 18 Ea. 270.00

Providing & fitting heavy duty brass

cable glands (nickel-plated) with

washers & rubber ring conforming to

IS, suitable for 3, 3½ & 4 core cables

of following type & sizes: Double

Compression Brass Cable Glands

70 sq.mm, 3 to 3.5 core, 38 mm, 1 "

17 CABLE AL. LUGS 600 Ea. 55.00

Providing & fitting crimping type Cable

Terminals (Lugs) conforming to IS of

following types and sizes … Copper

Tubular Terminals (in Sq.mm.)

18 Supplying and erecting LED street 6 No 5,643.75

light / Flood light fittings with High

power White LEDs wattage of 3 Watt

and above assembled on single

MCPCB, efficiency more than

lm/w and corrosion free High

pressure die cast aluminum housing

with smooth finish powder coated

and heat sink extruded aluminium

with diffuser and Polycarbonate

optice lenses, with toughened glass

with company mark/name-engraved

or embossed 160 to 270 V.Power

Factor more than 0.95, THD < 10%,

CCT 3000 K to 5700K, Uniformity ratio

>0.45, Luminaire efficacy>

lumens/watt LED driver efficiency >

85 %.(fittings required LM-79 & LM-80

certificates) (NOTE: Below

description have shown ranges of

Wattage capacity of LED fittings. The

Engineer incharge may select any

wattage capacity between the ranges

[Volume V: Price-Bid] Page

Item Description Qty. Unit Rate Amount Rs.

(A) Street Light (IP-65), Surge

protection -4KV integral and Light

must have 440VAC line supply with

over-voltage protection.

above 90 to 120 watts Cat II

19 EARTHING: 22 No 6,961.61

Supplying & erecting funnel type

earthing having earth plate of

following size burred in specifically

prepared earth pit 3 mtr. below

ground with 40 kg. charcoal and salt

with alternate layers of charcoal &

salt, 20mm.dia. G.I. pipe with Funnel

with a wire mesh for watering & bricks

masonry block, C.I. Cover complete

as per para 7.3 of IS 3043 with

necessary length of double

Galvanised Iron / copper earth wire

No 6 SWG bolted with lug to the plate

and covered in 12 mm dia. G.I. pipe

2.5 mtr long complete connected to

the nearest switch gear with end

socket as per direction & duly tested

by earth tester confirming to IS (As per

drawing) with following specification.

with 60 x 60x 0.315 cms. Copper earth

Plate ( Pump 10 + Transformer 12)

19 G.I. Earth Strip : 480 Kg. 68.75

providing & erecting required size

HOT deep Galvanised iron strip for

earthing of H.T. , OCB/ ACB/

Transformer LT panel board, Motors

etc. using proper clamp.

19 Copper Earth Strip : 180 Kg. 702.68

Providing and erecting required size

Copper strip for earthing of H.T. OCB /

ACB/Transformer, LT panel board,

Motors etc. using copper clamp.

20 Providing and fixing printed 10 Ea. 115.18

instruction chart both in English and

Gujarati and duly framed with front

glasses, for treatment of person

suffering from Electric shock with

minimum 50"diagonally size.

21 Providing pair of rubber hand gloves 4 Ea. 189.29

suitable for working on 11 KV/22 KV

[Volume V: Price-Bid] Page

Item Description Qty. Unit Rate Amount Rs.

22 Supplying rubber matting of following 48 Sq. 810.71

thickness as per IS:15652/IEC 61111 Mtr

(b)4mm (for all HW)

23 Supplying stand first AID box with 4 Ea. 265.18

antiseptic cream, medicine for use on

wounds due burn, crepe bandage,

gauge bandage, medicated ready to

use bandage (Band-aid) adhesive

tape for medicinal user, Scissors,

anti-septic solution (Savlon or similar)

etc. (All above contents shall

be of standard makes) (for all HW)

24 Supplying & erecting carbon dioxide 8 Ea. 5,826.79

(CO2) fire extinguisher user of

following capacity with necessary

clamps made from 50 x 6 mm M.S.

Flat with nut & bolts grouted in wall

complete. [A] For 4.5 Kg Capacity(for

25 Supplying & erecting ABC powder 16 Ea. 750.00

type 'Ceasefire' type Fire extinguisher

as per IS 13849 or 1 Kg capacity with

necessary clamp for erection on wall

I/ We am/ are willing to carry out work at ____ % ( in figure )

_______________________________________(in words ) above / below the tendered estimated rates as

mentioned above

Offer for Above Offer for Below

1. Estimate cost Rs: 56,48,561.00 1. Estimate cost Rs:-

in words( in words(

Signature of Contractor Executive Engineer,

P.H.Mech Division

[Volume V: Price-Bid] Page