Development Works in mavinakere,Azad nagar, ward no.04 in raichur city under amrut-2.0

Development Works in mavinakere,Azad nagar, ward no.04 in raichur city under amrut-2.0

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caut...

Supplying and filling in basement with Stone soling 40mm dia down size and filling the pores with the dust, in layers of not more than 15cm thick, well rammed, watered and consolidated etc., complete...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse agg...

Steel Reinforcement

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour c...

Providing, fabricating,fixing of SS Screens using SS 304 bars, with spacing as per the drawing and of 4 mm thick with handle (7.5kg) including cost of material, transportation, labour charges etc comp...

Supply, Installation, Testing and commissioning of CI Open Channel Sluice Gates, Manually operated, Rising Spindle type suitable for mounting in between two parallel walls of an Open Channel. Water se...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as requi...

Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete

Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials to the appropriate disposal area stacking serviceable and unserviceable materi...

Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tr...

Providing UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tr...

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two sand and four aggregates), using following HBGS jelly including cost o...

Providing and installation of Class SN8 Double Wall Corrugated HDPE pipe outer wall corrugated and inner wall smooth piping system in accordance with IS 16098 part 2 and conveying to work site and low...

Road restoration concrete Road

Road restoration Bitumen Road

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Providing and constructing ogf machine hole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and downsize graded metal of approved quality and with an offset of 0.15m alround the c...

Operation and maintenance of Lake (5 years)