Loading
Loading…
Loading…
Tender Value
₹11.8 L
EMD Value
₹23,690
Closing Date
9 Sept 2026, 6:00 pm
EXECUTIVE OFFICER
PAKURTALA, RAGHUNATHGANJ, MURSHIDABAD
Repair and Improvement of Blacktop Road from Raghunathganj Head Post Offce to Gujipur River Bridge in Ward No- 13,14,15,17 within Jangipur Municipality Starting
2026_MAD_1039129_4
MAD/ULB/JM/DMA/NIeT2/2026-2027 (1st Call)
Open Tender
CIVIL WORKS
Percentage
15 days
Ward No- 13, 14, 15, 17 within Jangipur Municipality
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹23,690
Yes
25 Aug 2026
25 Aug 2026
12 Sept 2026
25 Aug 2026
9 Sept 2026
25 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Ref:of NH SOR 2019-20,It No-04, Pg No-167
Filling Pot-holes and Patch Repairs with open-Graded Premix surfacing, 20mm.
Removal of all failed material,in the pavement courses and if necessary below the pavement,until the root trimming of completed xcavation to provide firm vertical faces; specified for the pavement layer; application of tack coat conforming to cl. 503 of ORT&H's specification ,on to the sides and base of excavation prior to placing hot bituminous material as per clause 510 and the compaction,trimming and finishing of the surfaces of all patches to form a smoothncontinuous surface, level with the surrounding road as per the requirement of clause 3004.2 of MORT&H's specification . | - | SqM | 1 | - |
| 2Ref:of NH SOR 2019-20,It-9B(ii)b,Pg No-104 Water Bound Macadam Providing, laying, spreading andn compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density (Reference to MoRT&H's specification 404). 9B(ii) Grading-2(Table 400-9) 9B (ii)(b) Using Screening(Table 400-10) Type-B (11.2 mm aggregate) | |||||
| 3Ref:of NH SOR 2019-20, It No-1A(i),Pg No- 110 Providing and applying primer coat with cationic bitumen emulsion SS1 grade conforming to IS:8887 on prepared porous granular surface including clearing of road surface and spraying primer using mechanical means (Reference to MORT&H's specification clause 502). On WMM/WBM surface @ 0.70-1.0kg /sqm. | |||||
| 4Ref:of NH SOR 2019-20, It No-3, Pg No-112 Bituminous Macadam Providing and laying bituminous macadam with 100-120 TPH hot mix plant using crushed aggregates of specified grading premixed with approved bituminous binder @ 3.3% (min) for Grading -1 and 3.4% (min) for Grading -2 by weight of total mix , transported to site, laid over a previously prepared base with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (Reference to MORT&H's specification clause 504). | |||||
| 5.1 | Ref:of NH SOR 2019-20, It No-2A(i), Pg No- 111
Providing and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).
i)On bituminous surface @ 0.20kg-0.3kg /sqm. sqm. 1.40 | - | SqM | 1 | - |
| 5.2 | Ref:of NH SOR 2019-20, It No-2A(ii), Pg No- 111
Providing and applying tack coat with Cationic bitumen emulsion (RS1) complying with IS:8887 using emulsion pressure distributor on the prepared bituminous/granular /cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).
ii)On Primer @ 0.25kg-0.30 /sqm | - | SqM | - | - |
| 6 | Ref:of NH SOR 2019-20,It-12(ii), Pg No-121
Seal Coat
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type A and B seal coats (Reference to MORT&H's specification clause 511)
12(ii) Case - II : Type B
Providing and laying of premix sand seal coat with HMP using approved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade. | - | SqM | 1 | - |
| 7Add applicable 9.00% CGST = Rs | |||||
| 8Add applicable 9.00% SGST = Rs | |||||
| 9Add 1.00% Labour welfare Cess = Rs | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.96 MB
WBF2911.pdf
Additional Documents • 0.79 MB
BOQ_2552209.xls
BOQ • 0.26 MB
pq.pdf
Additional Documents • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].