Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.0 Cr
EMD Value
₹4.0 L
Closing Date
30 Oct 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Officer,Amarpur NP
Executive Officer,Amarpur NP,Amarpur,GomatiTripura
Upgradation of earthen road with foot path at East bank of Amarsagar at ward no-03 under ANP area during the year 2026-27.PART-I
2026_Urban_78309_1
370/CE/UDD/EW/DNIeT/2026-27
Open Tender
Civil Works
Percentage
180 days
Amarpur
Please refer Tender documents.
5 documents required · 5 mandatory
₹8,000
Yes
₹4.0 L
Yes
16 Oct 2026
16 Oct 2026
30 Oct 2026
16 Oct 2026
30 Oct 2026
16 Oct 2026
16 Oct 2026 - 30 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Clearing grass and removal of rubbish up to a distance of 30 m outside the periphery of the area as per MoRD Technical Specification Clause 201.By Manual Means | 0.11 | Hectare | 22,910.9 | ₹2,428.56 |
| 2 | Compacting original ground supporting subgrade Loosening of the ground upto a level of 300 mm below the subgrade level, watered, graded and compacted in layers to meet requirement of Tables 300.1 and 300.2 for subgrade construction as per MoRD Technical Specification Clause 303.5.2. | 270 | cum | 30.4 | ₹8,208 |
| 3 | Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m
Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections and transporting to the embankment
location with all lifts and lead upto 1000 m as per MoRD Technical Specification Clause 302.3. | 204.57 | cum | 44.1 | ₹9,021.54 |
| 4 | Construction of Embankment with Material Obtained from Roadway Cutting Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per MoRD Technical Specification Clause 301.5. A. For Spreading beyond 100 m | 173.88 | cum | 81.1 | ₹14,101.67 |
| 5 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, dewatering, construction of shoring, shuttering & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable material..A)With dewatering. | 1,161.56 | Cum | 495.6 | ₹5,75,670.38 |
| 6 | Filling in foundation trenches as per drawing & MoRD technical specification Clause 305.3.9, 1200.Sand filling | 66.38 | cum | 1,168 | ₹77,526 |
| 7 | Providing concrete for plain/reinforced concrete in open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centering, shuttering, staging etc. but excluding reinforcement).P.C.C grade M 10(i) Nominal mix 1:3:6 | 66.38 | cum | 9,983.7 | ₹6,62,668.09 |
| 8 | Plain/reinforced cement concrete in substructure complete including formwork as per drawings & MoRD technical specification Clauses 802, 804, 805, 806, 807, 900, 1202 & 1204. (including centering, shuttering, staging etc. but excluding reinforcement) | 731.25 | cum | 12,300 | ₹89,94,375 |
| 9 | Supplying, fitting & placing Thermo-Mechanically treated bar/ Cold twisted deformed steel bar in substructure complete as per drawings & MoRD technical specification Clauses 1002, 1005, 1010 and 1202. | 87.75 | ton | 91,483.2 | ₹80,27,650.8 |
| 10 | Providing weepholes in brick masonry / stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe or uPVC pipe (110 mm OD of 6.0 Kg/cm2 pressure) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and MoRD technical specification clauses 614, 709, 1204.3.7. | 87 | m | 392.2 | ₹34,121.4 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 2.34 MB
PWDForm_7.pdf
Additional Documents • 0.11 MB
BOQ_79718.xls
BOQ • 0.28 MB
DNIeT.pdf
Tender Documents • 2.49 MB
Annexure_II_III.pdf
Additional Documents • 0.16 MB
Appendix_I_II_III_IV_V.pdf
Additional Documents • 0.20 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .