REPAIR TO DRAIN, GARBAGE BIN INCINERATORS ETC AT NAGTLAO UNDER GE BANAR

Amount

Demolition brickwork or stone masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stonework and precast concrete articles complete all as specified.

M&L for squared rubble walling Jodhpur type brought upto courses, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified.

All as per Item Ser No 2.00 above but except stone.

Extra over item 2 for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm & dressing face beds and joints as specified to squared rubble walling, jodhpur type, brought upto courses complete all as specified.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified.

Raking out joints/ pointing to squared rubble masonry, coursed or uncoursed complete all as specified.

M&L for keyed pointing to squared rubble, coursed or uncoursed stone masonry wall in CM 1:4 complete all as specified.

M&L rendering 15 mm thick in CM 1:4 on brick masonry finished even and smooth without using extra cement complete all as specified.

M&L for three coats of white wash on walls including preparation to newly plastered surfaces of walls complete all as specified.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in conrete filling/coping complete all as specified.

Supply MS round bar 10mm dia conforming to Fe 290 Gde E-165 including binding with MS wire for Incinerator mesh complete all as specified.

S&F in repairs Welded steel (weight not exc 4 Kg/sqm) wire fabric fixed to wood or steel members complete all as specifed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

S&F framed work as in doors or gates of angles or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete incl pintel hinges, stops hand made sliding bolts etc conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified.

Dismantling of stone cover on manhole/drain of any description complete all as specified.

Provide and lay Machine cut sand stone slabs of thickness 5 cm in coverstones, for covering manholes/drain . n exc 2m in length punched dressed on face and along exposed edges ,width varies from 25 cm to 35 cm complete all as specified.

Taking down cement or cement lime plaster, any description on brick or stone walls,etc including racking out joints, hacking for key,scrubbing down with water etc complete all as specified.

M&L Rendering 10 mm thick plaster in CM 1:6 on fair faces of brick work or concrete surfaces be finished even and smooth (without using extra lime or cement complete all as specified.

M&L for two coat of cement base paint over a coat of primer with alkali resistant primer of walls after necessary preparation of surfaces complete all as specified.

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate 50 mm thick as in plinth protection complete all as specified and directed.

Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified.

Excavation in post holes or similar holes in earth/concrete surface each not exc 0.5 cum getting out returning, filling in and ramming earth/broken rubble mixed with earth around in layers n exc 25cm , watering and removing surplus soil to distance not exceeding 50m and making good surface in soft/loose soil complete all as specified.

S&F Fe-410-W (Gde E-250) quality-A rolled steel sections/hollow sections as in main and cross beams, purlins, where connected to common rafters and running rails fixed with angle cleats or other connecting plates complete all as specified.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

M&L for preparing new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified.

M&L for Chequered cement concrete tiles with white cement and pigment (Rubber moulded) 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified.

Supply and laying 80mm thick factory made chamfered edge cement concrete rubberised paver block of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified.

Supply and laying 60 mm thick factory made chamfered edge cement concrete rubberised paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified.

M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified.

S&F MS angle Iron / FI fillets as in fencing posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc conforming to Fe 410-O or Fe 310-O complete all as specified.

Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in concrete,brickwork, masonary, including taking out embedded portion and making good disturbed ground complete all as specified.

Dismantling fencing wire mesh, any type complete all as specified.

Supply only chain link fencing of MS GI wire mesh, 3mm dia of GI wire mesh up to into mattresses or cages lapped wired incl. staple etc complete all as specified.

Fixing only chain link fencing of any mesh size/any type incl. link wire to any type of standard rails/supports etc & straining bolt etc incl. provision of binding wire complete all as specified.

Supply only MS round bar 10mm dia conforming to Fe 290 Gde E-165 as line wire for chain link fencing. Note : Cutting to length, bent to shape required including binding with MS wire is included complete all as specified.

S&F mild steel, screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, exc 5cm but not exceeding 10cm long and dia of shank 11 to 15mm complete all as specified.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified.

M&L for laying 300mm dia. Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified.

Demolition and breaking up 300 mm dia (internal), drain pipes set in cement mortar including hunching concrete against the side of drain pipe complete all as specified.

M&L cement concrete bed 1:4:8 type D2 to drain pipes including packing under and haunching against the sides of pipe of 300mm dia after they are laid and tested complete all as specified.

S AND S Constructions (BID ID -3308241)

PREM TRADERS (BID ID -3308774)

D DEV COMPANY (BID ID -3301876)

M/s Anand Construction Company (BID ID -3307812)

Narender Constrution Company (BID ID -3303614)