Fabrication, Supply, Installation, Testing and Commissioning with required Plumbing , Civil and Electrical works for installation of fully painted Modular 3 seater European toilet unit with proper sturdy doors having lock and key, including a basin

Specification for Prefabricated MS Structure with sandwitch Panels and water tank Portable Toilet without Storage Container- 3 seater Module Number of Compartments -3 Type of WC - European with Ceramic Pan Water Facility - Direct from External Source Sewage Facility - shall be connected to Existing tank with 100mm outlet facility with Butterfly Valve. Ventilation - 1 no Wash basin - Separate with covered space. Leech Pit Provision - required Civil work - To be carried out by supplier Side panel frame material - 35mm x 35mm x 5mm thick and 25mm x 25mmx 3mm thick MS angles Top roof frame material - 40mm x 40mm x 5mm thick – 35mm x 35mm x 5 mm thick and 25 mm x 25 mm x 3 mm thick MS angles Top roof support frame material - 40mm x 5 mm thick, 35 mm x 5 mm thick, 25 mm x 3 mm thick MS Flats Partition Frame material - 35mm x 35mm x 5 mm thick, 25 mm x 25mm x 3 mm thick MS Angles Ventilation frame material - 25 mm x 25 mm x 3 mm thick flat MS Door frame materials - 50mm x 25 mm of 14-16 gauge rectangular MS hollow pipe Support material for Door panel - Aluminum U channel of 18 gauge. Door hinges (Two numbers) - 75 mm with 1.2 to 1.5 mm thickness MS Tank Holder frame material - 25 mm x 3 mm thick SS flat Unit under structure - with leg base Stairs - with stair ladder at one side Stair material - 25mm x 25 mm x 1.5mm thick square pipe GI Door Tee material - 40mm x 40 mm x 40mm x 5mm SS Tee Side panel material - Insulated walls to be made of continue lines sandwich panel with 0.35 mm thick pre coated steel sheet (PPGI-sheet) having 120 GSM with minimum 4 microns’ epoxy primer on both sides of sheet and polyester top coat min. 15 microns on both sides of PUF with Polyurethane foam thickness 38 mm having density 40 kg/CUM +/-2 kg/CUM Top roof panel material - Insulated walls to be made of continue lines sandwich panel with 0.35 mm thick pre coated steel sheet (PPGI- Sheet) having120 GSM with minimum 4 microns’ epoxy primer on both sides of sheet and polyester top coat min. 15 microns on both sides of PUF with Polyurethane foam thickness 38 mm having density 40 kg/CUM +/-2 kg/CUM Door panel Material - Insulated walls to be made of continue lines sandwich panel with 0.35 mm thick pre coated steel sheet (PPGI- Sheet) having 120 GSM with minimum 4 microns’ epoxy primer on both sides of sheet and polyester top coat min. 15 microns on both sides of PUF with Polyurethane foam thickness 38 mm having density 40 kg/CUM +/-2 kg/CUM Partition Panel Material - Insulated walls to be made of continue lines sandwich panel with 0.35 mm thick pre coated steel sheet (PPGI- Sheet) having 120 GSM with minimum 4 microns’ epoxy primer on both sides of sheet and polyester top coat min. 15 microns on both sides of PUF with Polyurethane foam thickness 38 mm having density 40 kg/CUM +/-2 kg/CUM Floor material (Inside cubical) - Fitted with Plastic light weight LLDPE roto molded Size of each cubical (LxWxH) +/- 25 mm - 1220mm x 1220mm x 1980 mm Partition height +/- 20 mm - 1830 mm Stair size - As required Overhead tank material - PVC Overhead Tank Capacity - 200 to 500 liter Sewage Tank Material - Direct connection to Existing tank facility Electric connection - From existing mains Base floor surface (inside) - To be suitably slanted towards out let connection Raised platform for passage - width of passage 1220 mm and height of passage above ground level 225 mm antiskid block finish on passage only Brick foundation size - 200 mm x 200 mm with depth of 200mm from ground level for anchor / column location. Pocket to be filled - with PCC of 1:2:4 steel ratio after grouting of steel element of structure Plinth height -300 mm with 125 mm brick plus 1:5 mortar Platform size - 1125 mm x 1500 mm Soling height - 75 mm by single brick flat Floor casting - 75 mm PCC of 1:2:4 above brick flat soling Outside Plinth plaster - 15 mm thick on brick work with CM 1:5 Stairs Dimension - Two number stairs of 250 mm (Width) x 900 mm (Length) x 150 mm (Height) Pipe Connection - To be between Toilet structure inspection channel and existing leech pit. Warranty Period - Minimum 1 year.