Supply of diffrent Materials of MGNREGA under Kaliganj Block

Supply of 1st class Bricks including loading unloading & stacking at different sites.

Supply of Silver Sand including loading unloading & stacking at site.

Supply of Sand(Coarse) including loading unloading & stacking at site.

Supply of Sand(Fine) including loading unloading & stacking at site.

Supply of Sand(Medium) including loading unloading & stacking at site.

Supply of Stone chips (20mm Nominal Size) including loading unloading & stacking at site. (Pakur Variety)

Supply of Stone chips (10mm Size) including loading unloading & stacking at site. (Pakur Variety)

Supply of 1st class Bricks bats (Size- 40mm-60 mm) including loading unloading & stacking at different sites.

Supply of Cement (ISI mark) (PPC) including loading unloading & stacking at site.

Supply of Polythene Sheet including loading unloading & stacking at site. (LMR)

Supply of Tor steel/HYSD/Fe 415/Fe 500/Fe 500D (SAIL/TATA /RINL ) including loading unloading & stacking at site.((Page-304 of SOR wef 01.11.2017(10th CORRIGENDA & ADDENDA))

Hire charge of shuttering and centering materials

Supply of Wood (Local-35mm thick) including loading unloading & stacking at site.

Supply of Sal (Local) wood including loading unloading & stacking at site.

M.s or W.I Ornamental grill of approved design joints continuously welded with M.s, W.I flat and bars of windows railings etc. Fitted and fixedv with necessary screws and lungs in ground floor. "Grill weighing above 10kg/sq.mtr

Collapsible gate with 40mm x 40mm x 6mm tee as top and bottom guide rail ,20mm x10mm x2mm vertical channels 100mm apart in fully stretched position 20mm x5mm M.S flat as collapsile bracing properly rivetted and washered including 38mm steel rollers including locking arrangrments , fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc in walls ,floors etc and making good damages complete.

Supply of Ready mixed primer including loading unloading & stacking at site.

Supply of best quality synthetic enamel paint of approved make and brand , (On timber or plastered surface & With other than hi-gloss of approved quality) including loading unloading & stacking at site.

Supply of best quality synthetic enamel paint of approved make and brand , (On steel or other metal surface & With other than hi-gloss of approved quality) including loading unloading & stacking at site.

Supply of Black enneled wire including loading unloading & stacking at site.

Supply of Nails including loading unloading & stacking at site.

Supply of M.S. Clamp (40mm X 6mm, 125mm Length ) including loading unloading & stacking at site.

Supply of Iron butt hinge (75mm. X 60mm. X 3.15mm ) including loading unloading & stacking at site.

Supply of Iron butt hinge (100mm. X 75mm. X 3.5mm ) including loading unloading & stacking at site.

Supply of Iron hasp bolt(300mm long) including loading unloading & stacking at site.

Supply of Iron socket bolt(150 mm long x 10 mm dia bolt) of approved quality. including loading unloading & stacking at site.

Supply of Iron socket bolt(100 mm long x 10 mm dia bolt) of approved quality. including loading unloading & stacking at site.

Supply of Water closet Orissa pattern water closet including loading unloading & stacking at site. 530 mm X 410 mm

Supply of Squating plate with integral flushing in white vitreous chinaware including loading unloading & stacking at site. 450 mm X 350 mm

Hire charges of Mixer Machine( 0.25 to 0.40 cum) with Hopper including operater, necessary fuiels, operator, loading, unloading & stacking at site.

Hire charges of Vibrator (Niddle 40 mm dia) including operater, necessary fuiels, loading, unloading & stacking at site.

Hire charges of Floor Vibrator including operater, necessary fuiels, loading, unloading & stacking at site.

Supply of 25mm thick Themocol at site including loading, unloading & stacking.

Supply of Empty Gunny bags in good condition (considering the volume of each filled Gunny bag is 0.028 cum) including loading unloading & stacking at site.

Supply of First Aid Box including medicines (specified by PIA) at site.

Supply of Water bottle of 2 ltrs. (good quality) (specified by PIA) at site.

Supply of Bamboo (8cm - 10 cm dia ) including loading unloading & stacking at site.

Supply of Nylon Net including loading unloading & stacking at site.

Supply of Poly rope including loading unloading & stacking at site.

Supply of Cowdung including loading unloading & stacking at site.

Supply of Vermi Compost including loading unloading & stacking at site.

Supply of Neem Khol including loading unloading & stacking at site.

Supplying, fitting, fixing, painting(oil paint) the surface & write the matters supplied by PIA of MGNREGA Sign Board at site including loading, unloading & other charges. For Community work

Supplying, fitting, fixing, painting(oil paint) the surface & write the matters supplied by PIA of MGNREGA Sign Board at site including loading, unloading & other charges. For IBS work

2:1:1 NPK based Organic Manure

5:1:1 NPK based Organic Manure

Cholorpy riphos

Neem based vermicompost

Neem khol or other oil seed cake

Lime stone powder

Bone dust

Coconut Rop (LMR)

Lime Dust

Bucket

Jhali/Rose Can

Bio Pesticides

Bio Fungicides

PVC Door

PVC Pipe for water supply (40mm dia)

PVC Pipe for water supply (25mm dia)

PVC Pipe for water supply (15mm dia)

PVC low down cistern conforming

Wash Basin (450 X300 )mm

PVC waste pipe, 32mm dia

Flat back urinal

Iron Soil pipe

Hume pipe 600 mm dia

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary On timber or plastered surface i) One coat (white in shade)

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary On timber or plastered surface ii) Two coats (white in shade)

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary On timber or plastered surface (iii) One coat (with any shade except white)

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary On timber or plastered surface (iv) Two coats (with any shade except white)

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary On steel or other metal surface : i) One coat (white in shade)

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary On steel or other metal surface : ii) Two coats (white in shade)

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary On steel or other metal surface : (iii) One coat (with any shade except white)

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary On steel or other metal surface : (iv) Two coats (with any shade except white)

Painting with superior quality aluminium paint of approved make and brand including smoothening surface by sand papering etc. on steel surface : (a) One coat

Painting with superior quality aluminium paint of approved make and brand including smoothening surface by sand papering etc. on steel surface : (b) Two coats

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) Standard Quality

Mild steel tubes hot finished seamless type

Galvanised steel corrugated sheets

Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots

Galvanised steel J or L hooks 8 mm dia

G.I Limpet washer

Bitumen washer

Stainless steel bolts /square bar and plates

Welding by electric plant

Bolts and nuts up to 300 mm in length

1st class picket jhama brick

Supply of Slow grown Species Seeds (SGS) for Nursery (up-to 10 different variety and for raising of 1000 saplings for each variety)

Supply of Quick grown Species Seeds (QGS) for Nursery (up-to 10 different variety and for raising of 1000 saplings for each variety)

Supply of polythene tube 8 inch X 6 inch Size good quality pot for

Supply of polythene tube 6 inch X 4 inch Size good quality pot

Supply of power roller (8 to 10 ) ton

Bamboo Pile Walling made of 6.5cm to 7.5cm dia bamboo (in single line) driven about half-length into ground at very close spacing of 30cm c/c side by side, with stout stays at an interval of 90cm fixed with bamboo post of length 1.25m driven 1m below G.L., 3 nos. of half split bamboo runner of same dia fitted and fixed with nails etc. and lining exposed portion with sheets made from cut drums (empty bitumen drums) fitted and fixed with a lap width of 100 mm at each joint, complete as per direction including the cost of drum sheets and including the cost of nails, wires etc. (i) With bamboos of length upto 2.00m (PWD (WB), Schedule of Rates : 2018 page no 338) Item No. 18.38

Bamboo Pile Walling made of 6.5cm to 7.5cm dia bamboo (in single line) driven about half-length into ground at very close spacing of 30cm c/c side by side, with stout stays at an interval of 90cm fixed with bamboo post of length 1.25m driven 1m below G.L., 3 nos. of half split bamboo runner of same dia fitted and fixed with nails etc. and lining exposed portion with sheets made from cut drums (empty bitumen drums) fitted and fixed with a lap width of 100 mm at each joint, complete as per direction including the cost of drum sheets and including the cost of nails, wires etc. 1.(ii) With bamboos of length above 2.00m and upto 2.50m (PWD (WB), Schedule of Rates : 2018 page no 338) Item No. 18.38

Bamboo Pile Walling made of 6.5cm to 7.5cm dia bamboo (in single line) driven about half-length into ground at very close spacing of 30cm c/c side by side, with stout stays at an interval of 90cm fixed with bamboo post of length 1.25m driven 1m below G.L., 3 nos. of half split bamboo runner of same dia fitted and fixed with nails etc. and lining exposed portion with sheets made from cut drums (empty bitumen drums) fitted and fixed with a lap width of 100 mm at each joint, complete as per direction including the cost of drum sheets and including the cost of nails, wires etc. 1.(iii) With bamboos of length above 2.50m and upto 3.00m (PWD (WB), Schedule of Rates : 2018 page no 338) Item No. 18.38

Drum Sheet Walling 1.40m (av.) high on Sal-bullah / Eucalyptus bullah piling 10 cm dia. and 3.25m long driven 1.75m (av.) below G.L. and 75cm centre to centre including fitting fixing 3 nos. of half bullah pieces (from 10 cm dia) and drum(empty bitumen) sheet (approved condition) of height 1.5m , cutting and straightening drum sheet (each joint must have lap length of min.50mm) including cost of necessary nails, bolts, nuts etc. and providing 2 to 3m long half bullah ties of 10cm dia. @ 2.25 m centre to centre fixed with 10 cm dia. bullah posts driven 1.5m below G.L. including cost of all materials and one coat of coal tarring to all bullah etc. complete as per direction. (PWD (WB), Schedule of Rates : 2018 page no 338) Item No. 18.39 (i) Using Eucalyptus bullah

Drum Sheet Walling 1.40m (av.) high on Sal-bullah / Eucalyptus bullah piling 10 cm dia. and 3.25m long driven 1.75m (av.) below G.L. and 75cm centre to centre including fitting fixing 3 nos. of half bullah pieces (from 10 cm dia) and drum(empty bitumen) sheet (approved condition) of height 1.5m , cutting and straightening drum sheet (each joint must have lap length of min.50mm) including cost of necessary nails, bolts, nuts etc. and providing 2 to 3m long half bullah ties of 10cm dia. @ 2.25 m centre to centre fixed with 10 cm dia. bullah posts driven 1.5m below G.L. including cost of all materials and one coat of coal tarring to all bullah etc. complete as per direction. (PWD (WB), Schedule of Rates : 2018 page no 338) Item No. 18.39 (ii) Using Sal-bullah

Asbestos corrugated (Trafford or similar approved quality) sheet (6 mm thick) work (excluding the supporting framework) fitted and fixed with 9.5mm. dia. J or L hook-bolt and nuts, limpet and bitumen washers and putty with 150 mm end lap & one corrugation minimum side lap complete. (Payment should be made on area of finished work) (a) In Roof , (Page No. 80 Item No 07)

Supplying Eucalyptus-bullah piles at work site, including dressing and making one end pointed. (Note:- Diameter of pile to be measured at a distance of 1.5m from the thicker end.) (PWD (WB), Schedule of Rates : 2018, Page no 334 Item No 18.18) (i) 100mm diameter

Supplying Eucalyptus-bullah piles at work site, including dressing and making one end pointed. (Note:- Diameter of pile to be measured at a distance of 1.5m from the thicker end.) (PWD (WB), Schedule of Rates : 2018, Page no 334 Item No 18.18) (ii) 125mm diameter

Supplying Eucalyptus-bullah piles at work site, including dressing and making one end pointed. (Note:- Diameter of pile to be measured at a distance of 1.5m from the thicker end.) (PWD (WB), Schedule of Rates : 2018, Page no 334 Item No 18.18) (iii) 150mm diameter

Supplying Eucalyptus-bullah piles at work site, including dressing and making one end pointed. (Note:- Diameter of pile to be measured at a distance of 1.5m from the thicker end.)(PWD (WB), Schedule of Rates : 2018, Page no 334 Item No 18.18) (iv) 175mm diameter

Supplying Eucalyptus-bullah piles at work site, including dressing and making one end pointed. (Note:- Diameter of pile to be measured at a distance of 1.5m from the thicker end.)(PWD (WB), Schedule of Rates : 2018, Page no 334 Item No 18.18) (v) 200mm diameter

Supplying Eucalyptus-bullah piles at work site, including dressing and making one end pointed. (Note:- Diameter of pile to be measured at a distance of 1.5m from the thicker end.)(PWD (WB), Schedule of Rates : 2018, Page no 334 Item No 18.18) (vi) 225mm diameter

Supplying Sal-bullah piles at work site, including dressing and making one end pointed. (Note:-Diameter of pile to be measured at a distance of 1.5m from the thicker end.) (i) 100mm diameter

Supplying Sal-bullah piles at work site, including dressing and making one end pointed. (Note:-Diameter of pile to be measured at a distance of 1.5m from the thicker end.) (ii) 125mm diameter

Supplying Sal-bullah piles at work site, including dressing and making one end pointed. (Note:-Diameter of pile to be measured at a distance of 1.5m from the thicker end.) (iii) 150mm diameter

Supplying Sal-bullah piles at work site, including dressing and making one end pointed. (Note:-Diameter of pile to be measured at a distance of 1.5m from the thicker end.) (iv) 175mm diameter

Supplying Sal-bullah piles at work site, including dressing and making one end pointed. (Note:-Diameter of pile to be measured at a distance of 1.5m from the thicker end.) (iv) 175mm diameter

Supplying Sal-bullah piles at work site, including dressing and making one end pointed. (Note:-Diameter of pile to be measured at a distance of 1.5m from the thicker end.) (vi) 225mm diameter

Supplying Sal-bullah piles at work site, including dressing and making one end pointed. (Note:-Diameter of pile to be measured at a distance of 1.5m from the thicker end.) (vi) 225mm diameter

a) 25 mm thick Tiles as per IS: 1237-2012 for footpath,ramp,staircase of public building(over 25 mm thick (Avg) Cement mortar (1:3) & Cement Slurry @ 4.4 kg/Sq.m at back side of Block. Cement for Mortar & Slurry to be supplied by Department (ii) Coloured Decorative

(b) 50 mm thick interlocking designer concrete paver block M30 grade for non-traffic zone,buiding premises,garden,parks,domestic drive as per IS: 15658- 2006(over 20-30 mm medium sand bed on 200mm thk bound gnaular /granular base course including cost of sand for sand bed but excluding cost of base course & subgrade preparation.) (i) Grey

(b) 50 mm thick interlocking designer concrete paver block M30 grade for non-traffic zone,buiding premises,garden,parks,domestic drive as per IS: 15658- 2006(over 20-30 mm medium sand bed on 200mm thk bound gnaular /granular base course including cost of sand for sand bed but excluding cost of base course & subgrade preparation.) (i) Grey

(c) 60 mm thick interlocking designer concrete paver block M35 grade for light-traffic zone,commercial & office complex,tourist resort as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular /granular sub-base course including cost of sand for sand bed but excluding cost of base ,sub-base course & subgrade preparation.) (i) Grey

(c) 60 mm thick interlocking designer concrete paver block M35 grade for light-traffic zone,commercial & office complex,tourist resort as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular /granular sub-base course including cost of sand for sand bed but excluding cost of base ,sub-base course & subgrade preparation.) (ii) Coloured Decorative

R.C. Guard post Supplying fitting and fixing R.C. guard post 1.37m long with C.C. 1:2:4 with graded stone chips of 13.2mm down casting , curing complete including cost of providing 4nos.of 12mm dia. rod of length 1.54m as main reinforcement and 6 nos. of round shaped 8mm dia rods used as binders; the placing of

Supply of Concrete pole with iron made circular ring of 4 inch x 3 inch x 8fit. Dimension for Dragon fruit cultivation.