Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.6 CrQualified 0 VILL RAJAUPARASPUR TEH FARIDPUR BAREILLY UTTAR PRADESH 243001 UDYAM UP 15 0001022 | BAREILLY | UTTAR PRADESH | 243001 | ₹1.6 Cr | L1 | Qualified MSE, MII, Category: General |
| 2 | L2₹1.7 CrDisqualified 50 SIR HA SHYAM SHREE MARKET 50 SIR HARI RAM GOENKA STREET 1ST FLOOR ROOM 8B KOLKATA 903 KOLKATA WEST BENGAL 700007 UDYAM WB 10 0003226 19AAOFS6418G1ZR R M MII STATUS AS VERIFIED | KOLKATA | WEST BENGAL | 700007 | ₹1.7 Cr | L2 | Disqualified MSE, MII, Category: General |
Tender Value
Refer Docs
EMD Value
₹2.1 L
Closing Date
27 Dec 2025, 12:00 pmClosed
Alumino - Ferric (V2) Conforming to IS 299 (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC)
Additional Doc 1 (Requested in ATC)
Additional Doc 2 (Requested in ATC)
Additional Doc 3 (Requested in ATC)
Additional Doc 4 (Requested in ATC)
Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer ? ? Do you want to show documents uploaded by bidders to all bidders participated in bid? Yes (Documents submitted as part of a clarification or representation during the tender/bid process will also be displayed to other participated bidders after log in) Minimum number of bids required to disable automatic bid extension 3 Bid Number : GEM/2025/B/6985158 Dated : 12-12-2025 Bid Document 1/9
-- Number of days for which Bid would be auto -- extended 7 Number of Auto Extension count 1 Bid to RA enabled Yes RA Qualification Rule H1-Highest Priced Bid Elimination Type of Bid Two Packet Bid Time allowed for Technical Clarifications during technical evaluation 5 Days ( )/Inspection Required (By Empanelled Inspection Authority/Agencies pre-registered with GeM) No Evaluation Method Total value wise evaluation Arbitration Clause No Mediation Clause No Bid Details EMD Detail Advisory Bank PUNJAB NATIONAL BANK EMD Amount 214977 ePBG Detail Advisory Bank PUNJAB NATIONAL BANK (%) ePBG Percentage(%) 3.00 ( ) Duration of ePBG required (Months). 10 (a). EMD EXEMPTION: The bidder seeking EMD exemption
must submit the valid supporting document for the relevant category as per GeM GTC with the bid. Under MSE category
only manufacturers for goods and Service Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. (b).
EMD & Performance securityshould be in favour of Beneficiary
wherever it is applicable. 2/9 Beneficiary : Contracts & Materials Damodar Valley Corporation
Contracts and Materials
(Damodar Valley Corporation) Splitting Splitting Applied Yes
Maximum No. Of Bidders Amongst Which Order May Be Split 2 Split Criteria based on which quantity will be distributed While splitting the requisitioned quantity between two or more vendors
the original evaluated L1 vendor shall always be in an advantageous position i.e. quantity between L1 and L2 vendors may be divided in ratio of minimum 60:40.FOR DETAILS REFER SPLITTING CLAUSE IN TERMS AND CONDITIONS ATTACHED IN GEM MII Purchase Preference MII Purchase Preference Yes
L 1+ X % Purchase Preference to MII sellers availabele upto price within L1+X% 20 Maximum Percentage of Bid quantity for MII purchase preference 50 ( - - ) 2017 1 2 16.09.2020 ( - ) Allow participation only from Class 1/Class 2 local suppliers as per the Public procurement(Preference to Make-in-india) order 2017 date 16.09.2020(as amended and applicable time to time) Yes
in compliance with the MII ORDER : DPIIT Order(as amended and applicable time to time) MSE Purchase Preference MSE Purchase Preference Yes
L 1+ X % Purchase Preference to MSE OEMs available upto price within L1+X% 15 3/9 Maximum Percentage of Bid quantity for MSE purchase preference 25 1. Preference to Make In India products (For bids < 200 Crore):Preference shall be given to Class 1 local supplier as defined in public procurement (Preference to Make in India)
Order 2017 as amended from time to time and its subsequent Orders/Notifications issued by concerned Nodal Ministry for specific Goods/Products. The minimum local content to qualify as a Class 1 local supplier is denoted in the bid document. If the bidder wants to avail the Purchase preference
the bidder must upload a certificate from the OEM regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid
failing which no purchase preference shall be granted. In case the bid value is more than Rs 10 Crore
the declaration relating to percentage of local content shall be certified by the statutory auditor or cost auditor
if the OEM is a company and by a practicing cost accountant or a chartered accountant for OEMs other than companies as per the Public Procurement (preference to Make-in -India) order 2017 dated 04.06.2020. Only Class-I and Class-II Local suppliers as per MII order dated 4.6.2020 will be eligible to bid. Non - Local suppliers as per MII order dated 04.06.2020 are not eligible to participate. However
eligible micro and small enterprises will be allowed to participate .The buyers are advised to refer the OM No.F.1/4/2021-PPD dated 18.05.2023. OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order
2012 and Public Procurement (Preference to Make in India) Order
2017. 2. Purchase preference will be given to MSEs having valid Udyam Registration and whose credentials are validated online through Udyam Registration portal as defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order
2012 dated 23.03.2012 issued by Ministry of Micro
Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned Ministry. If the bidder wants to avail themselves of the Purchase preference
the bidder must be the manufacturer/OEM of the offered product on GeM. Traders are excluded from the purview of Public Procurement Policy for Micro and Small Enterprises and hence resellers offering products manufactured by some other OEM are not eligible for any purchase preference. In respect of bid for Services
the bidder must be the Service provider of the offered Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the offered product or service and Buyer will decide eligibility for purchase preference based on documentary evidence submitted
while evaluating the bid. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% (Selected by Buyer) of margin of purchase preference/price band defined in relevant policy
such MSE Seller shall be given opportunity to match L-1 price and contract will be awarded for 25% (selected by Buyer) percentage of total quantity. The buyers are advised to refer the OM No. F.1/4/2021-PPD dated 18.05.2023 OM_No.1_4_2021_PPD_dated_18.05.2023 for compliance of Concurrent application of Public Procurement Policy for Micro and Small Enterprises Order
2012 and Public Procurement (Preference to Make in India) Order
2017. Benefits of MSE will be allowed only if seller is validated on-line in GeM profile as well as validated and approved by Buyer after evaluation of documents submitted. 3. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount and for determining the Eligibility Criteria related to Turn Over
Past Performance and Project/Past Experience etc. This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness of quoted prices which would be determined by the buyer based on its own assessment of reasonableness and based on competitive prices received in Bid/RA process. 4. Reverse Auction would be conducted amongst all the technically qualified bidders except the Highest quoting bidder. The technically qualified Highest Quoting bidder will not be allowed to participate in RA. However
H-1 will also be allowed to participate in RA in following cases: i . If number of technically qualified bidders are only 2 or 3. ii . If Buyer has chosen to split the bid amongst N sellers
and H1 bid is coming within N. iii . In case Primary product of only one OEM is left in contention for participation in RA on elimination of H-1. iv . If L-1 is non-MSE and H-1 is eligible MSE and H-1 price is coming within price band of 15% of Non-MSE L-1 v . If L-1 is non-MII and H-1 is eligible MII and H-1 price is coming within price band of 20% of Non-MII L-1 Alumino - Ferric (V2) Conforming To IS 299 ( 857 container(s) ) ( 1 2 Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier respectively) 4/9 Technical Specifications * As per GeM Category Specification Specification Specification Name Bid Requirement (Allowed Values) Requirements Grades Grade 4 - Solid Form (for treatment of water intended for drinking) Form Slabs Packing & Marking Packing Size 20 Kg Additional Specification Parameters - Alumino - Ferric (V2) Conforming To IS 299 ( 857 container(s) ) Specification Parameter Name Bid Requirement (Allowed Values) Instruction to Bidders Kindly note that
as per this GEM Category
there is no definition for Containers. Hence
1(one) container may be taken equivalent to 1(one) MT
and the price may be quoted on per MT (unit rate) basis. Unit of measurement The unit of measurement shown in the GEM BID is ' container'. One(01) container is equivalent to One(01) MT.
8695954
GEM/2025/B/6985158
Two Packet Bid
Alumino - Ferric (V2) Conforming to IS 299 (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No Document required from seller Certificate (Requested in ATC)
180 days
Khalkho 828206, Office of the Chief Engineer & Project Head, Damodar Valley Corporation, Panchet Dam, District- Dhanbad-
Total value wise evaluation
PRODUCT
6 documents required · 6 mandatory
₹2.1 L
27 Dec 2025
12 Dec 2025
27 Dec 2025
Alumino - Ferric (V2) Conforming to IS 299 (Q3) MSE Relaxation for Years of Experience and Turnover No Startup Relaxation for Years of Experience and Turnover No
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_8695954.pdf
GEM_BID
ATC_F_c947af90-a99e-429a-92881765516961009_EEM@EMandPC_Mejia.docx
OTHER
list-of-categories-where-trials-are-allowed_1712126171.pdf
OTHER
gtc.pdf
OTHER
Download all tender documents and submit your bid