Renewal of Suriyawa kalngra road with bc work

Amount

Providing and applying tack coat with bitumen (VG-10) using bitumen Emulsion pressure distributor @ 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom as per MoRTH Specification 5.2 (503).

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.

Providing and applying tack coat with bitumen (VG-10) using bitumen Emulsion pressure distributor @ 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom as per MoRTH Specification 5.2 (503).

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects

Construction of Embankment with approved Material Obtained from Barrow Pits with a lift and leads, transporting to site ,spreading ,grading to required slope and compacting to meet requirement of Tables 300.2

Providing and Laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250 gms per sqm area. Thickness of 2.5mm is exclusive of surface applied glass beads as per IRC 35. The finished surface to be level unifrom and and free from steaks and holes. composition of thermoplastic material shall be as per MORTH specification clause 8.13(803)& SOR traffic signage SL No.1 including cost of all material,labour T&P etc complete as per direction of Engineer in charge.

one year maintance charges.

Two year maintance charges.

Three year maintance charges.

Four year maintance charges.

Five year maintance charges.

KUMAR CONSTRUCTIONS

UMESH CHANDRA MISHRA

M/S SATYA PRAKASH SINGH CONSTRUCTION CO

M/S DEV CONSTRUCTION

ASHTBHUJA CONSTRUCTION

M/s Uma constractor

M/s Shakti Construction

M/S KUMAR CONSTRUCTION Co