321/26 -M C F Building construction

Work Name:Annual Plan-2025-26-Venganoor GP-Proj No 321/26 -M C F Building construction-Proj No 321/26 -M C F Building construction-General Civil Work

灳捥晩敩⁤牧摡⁥硥汣摵湩⁧桴⁥潣瑳漠⁦散瑮牥湩⁧湡⁤桳瑵整楲杮ⴠ䄠汬眠牯灵琠汰湩桴氠癥汥ㄺㄺ㪽″ㄨ䌠浥湥㩴ㄠ₽潣牡敳猠湡⁤稨湯ⵥ䥉⥉搠牥癩摥映潲慮畴慲潳牵散⁳›ള朊慲敤⁤瑳湯⁥条牧来瑡⁥〲洠潮業慮楳敺搠牥癩摥映潲慮畴慲潳牵散⥳㔀㤮ㄮ䌺湥整楲杮愠摮猠畨瑴牥湩⁧湩汣摵湩⁧瑳畲瑴湩Ⱨ攠捴‮湡⁤敲潭慶景映牯潦㩲潆湵慤楴湯ⱳ映潯楴杮ⱳ戠獡獥漠⁦潣畬湭ⱳ攠捴映牯洠獡⁳潣据敲整猀浱ĩ㔀ㄮ㈮债潲楶楤杮愠摮氠祡湩⁧湩瀠獯瑩潩灳捥晩敩⁤牧摡⁥景爠楥普牯散⁤散敭瑮挠湯牣瑥ⱥ攠捸畬楤杮琠敨挠獯⁴景挠湥整楲杮‬桳瑵整楲杮‬楦楮桳湩⁧湡⁤敲湩潦捲浥湥⁴‭汁潷歲甠⁰潴瀠楬瑮⁨敬敶㩬㨱㨱㨵″ㄨ挠浥湥⁴⸱‵潣牡敳猠湡⁤㌺朠慲敤⁤瑳湯⁥条牧来瑡⁥〲洠潮業慮楳敺搠牥癩摥映潲慮畴慲潳牵散⥳ 㔀㤮㘮䌺湥整楲杮愠摮猠畨瑴牥湩⁧湩汣摵湩⁧瑳畲瑴湩Ⱨ攠捴‮湡⁤敲潭慶景映牯潦㩲潃畬湭ⱳ倠汩慬獲‬楐牥ⱳ䄠畢浴湥獴‬潐瑳⁳湡⁤瑓畲獴ƕ㔀㈮㈮刺楥普牯散⁤散敭瑮挠湯牣瑥⁥潷歲椠慷汬⁳愨祮琠楨正敮獳Ⱙ椠据畬楤杮愠瑴捡敨⁤楰慬瑳牥ⱳ戠瑵牴獥敳ⱳ瀠楬瑮⁨湡⁤瑳楲杮挠畯獲獥‬楦汬瑥ⱳ挠汯浵獮‬楰汬牡ⱳ瀠敩獲‬扡瑵敭瑮ⱳ瀠獯獴愠摮猠牴瑵⁳瑥⹣甠⁰潴⁴汦潯⁲楦敶氠癥汥攠捸畬楤杮挠獯⁴景挠湥整楲杮‬桳瑵整楲杮‬楦楮桳湩⁧湡⁤敲湩潦捲浥湥⁴ㄺㄺ㔮㌺ ‱散敭瑮㨠ㄠ㔮挠慯獲⁥慳摮㨠㌠朠慲敤⁤瑳湯⁥条牧来瑡⁥〲洠潮業慮楳敺搠牥癩摥映潲慮畴慲潳牵散⥳Ā㔀⸰⸲㘲ㄮ䘺汩楬杮眠瑩⁨潣瑮慲瑣牯漠湷攠牡桴⠠硥汣摵湩⁧潲正 湩漠数牡慥⁳湩氠祡牥⁳潮⁴硥散摥湩⁧〲挠湩搠灥桴‬潣獮汯摩瑡湩⁧慥档搠灥獯瑩摥氠祡牥戠⁹慲浭湩⁧湡⁤慷整楲杮‬敬摡甠⁰潴㔠‰湡⁤楬瑦甠⁰潴ㄠ㔮洠愠⁳数⁲楤敲瑣潩景猠瑩⁥湅楧敮牥椭⵮档牡敧خ
⸷⸱㨱慒摮浯爠扵汢⁥慭潳牮⁹楷桴栠牡⁤瑳湯⁥湩映畯摮瑡潩湡⁤汰湩桴椠据畬楤杮氠癥汥楬杮甠⁰楷桴挠浥湥⁴潣据敲整ㄠ㘺ㄺ′ㄨ挠浥湥⁴›‶潣牡敳猠湡⁤›㈱朠慲敤⁤瑳湯⁥条牧来瑡⁥〲洠潮業慮楳敺 灵琠汰湩桴氠癥汥眠瑩㩨敃敭瑮洠牯慴⁲㨱‶ㄨ挠浥湥⁴›‶潣牡敳猠湡⥤Î㔀㈮⸲㨶瑓敥敲湩潦捲浥湥⁴潦⁲⹒⹃⁃潷歲椠据畬楤杮猠牴楡桧整楮杮‬畣瑴湩Ⱨ戠湥楤杮‬汰捡湩⁧湩瀠獯瑩潩湡⁤楢摮湩⁧污潣灭敬整甠瑰汰湩桴氠癥汥桔牥潭ⴠ䴠捥慨楮慣汬⁹牔慥整⁤慢獲漠⁦牧摡⁥敆㔭〰⁄牯洠牯ࡥ楫潬牧浡Đ㔀⸰⸶⸱㨲潓楬⁤汢捯慭潳牮⁹獵湩⁧牰⁥慣瑳猠汯摩戠潬正⁳䘨捡潴祲洠摡⥥漠⁦楳敺㐠砰〲㉸挰牯渠慥敲瑳愠慶汩扡敬猠穩⁥潣普物業杮琠卉㈠㠱‵慰瑲䤠漠⁦㤱㤷映牯猠灵牥猠牴捵畴敲甠⁰潴映潬牯琠潷氠癥汥琠楨正敮獳㈠挰湡⁤扡癯⁥湩›䵃ㄠ㘺⠠ㄠ挠浥湥㩴㘠挠慯獲⁥慳摮 瑥⁣潣灭敬整ㄮ
〵㤮ㄮㄮ债潲楶楤杮眠潯⁤潷歲椠牦浡獥漠⁦潤牯ⱳ眠湩潤獷‬汣牥獥潴祲眠湩潤獷愠摮漠桴牥映慲敭ⱳ眠潲杵瑨映慲敭⁤湡⁤楦數⁤湩瀠獯瑩潩楷桴栠汯⁤慦瑳氠杵⁳牯眠瑩⁨慤桳映獡整敮獲漠⁦敲畱物摥搠慩☠氠湥瑧⁨栨汯⁤慦瑳氠杵⁳牯搠獡⁨慦瑳湥牥猠慨汬戠⁥慰摩映牯猠灥牡瑡汥⥹‬獵湩⁧潧摯焠慵楬祴䄠橮汩⁩潷摯⼠慪正眠潯湤
〵㤮㌮ㄮ债潲楶楤杮愠摮映硩湩⁧慰敮敬⁤牯瀠湡汥摥愠摮朠慬敺⁤桳瑵整獲映牯搠潯獲‬楷摮睯⁳湡⁤汣牥獥潴祲眠湩潤獷‬〳洠桴捩桳瑵整獲椠据畬楤杮䤠䥓洠牡敫⁤⹍⹓瀠敲獳摥戠瑵⁴楨杮獥戠楲桧⁴楦楮桳摥漠⁦敲畱物摥猠穩⁥楷桴渠捥獥慳祲猠牣睥ⱳ攠捸畬楤杮瀠湡汥湩⁧桷捩⁨楷汬戠⁥慰摩映牯猠灥牡瑡汥ⱹ愠汬挠浯汰瑥⁥獡瀠牥搠物捥楴湯〠⁦湅楧敮牥椠⵮挠慨杲⹥甠楳杮䄠橮汩⽩䨠捡潷摯ş㔀⸰⸹⸴㨱牐癯摩湩⁧湡⁤楦楸杮瀠湡汥湩⁧牯瀠湡汥湩⁧湡⁤汧穡湩⁧湩瀠湡汥摥漠⁲慰敮敬⁤湡⁤汧穡摥猠畨瑴牥⁳潦⁲潤牯ⱳ眠湩潤獷愠摮挠敬敲瑳牯⁹楷摮睯⁳䄨敲⁡景漠数楮杮映牯瀠湡汥椠獮牥獴攠捸畬楤杮瀠牯楴湯椠獮摩⁥牧潯敶⁳牯爠扥瑡獥琠敢洠慥畳敲⥤瀠湡汥湩⁧潦⁲慰敮敬⁤牯瀠湡汥摥愠摮朠慬敺⁤桳瑵整獲㈠‵浭琠〴洠桴捩獵湩⁧潧摯焠慵楬祴䄠橮汩⽩䨠捡潷摯ē㔀⸰⸹⸶㨱牐癯摩湩⁧湡⁤楦楸杮朠慬敺⁤桳瑵整獲映牯搠潯獲‬楷摮睯⁳湡⁤汣牥獥潴祲眠湩潤獷甠楳杮㐠洠桴捩汦慯⁴汧獡⁳慰敮⁳湩汣摵湩⁧卉⁉慭歲摥䴠匮‮牰獥敳⁤畢瑴栠湩敧⁳牢杩瑨映湩獩敨⁤景爠煥極敲⁤楳敺眠瑩⁨敮散獳牡⁹捳敲獷‮獕湩⁧湁楪楬眠潯⁤ 慪正眠潯⁤〳洠桴捩桳瑵整獲á㤀㐮⸸㨱牐癯摩湩⁧湡⁤楦楸杮䴠匮‮片汩獬漠⁦敲畱物摥瀠瑡整湲椠牦浡獥漠⁦楷摮睯⁳瑥⹣眠瑩⁨⹍⹓映慬獴‬煳慵敲漠⁲

ound bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by weldingkg99.119:Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door fame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer-in Charge.metre‡9.120.1:Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and sized of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of whicj 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5mm thick, 95 mm wide PVC sheet out of which75 mm shall be tapered in 45 degree on th inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mmx2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded /sealed to the styles & rails with 7 mm (5 mm + 2 mm ) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer -in-charge, manufacture's specification & drawing.30 mm thick plain PVC door [email protected]:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)Š13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer‡13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work‚13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new workè50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete<10.7:Providing and fixing ball bearing for rolling shutters.noŒ
10.25.1:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all completey10.6.2:Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.20 mm M.S. laths with 1.20 mm thick top cover¸21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ).ä50.12.4.2:Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately)@OD276292/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.350 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
OD276286/2025-2026:Providing and fixing percolated galvanised steel sheet roofing accessories 0.35mm(+0.05%)total coated thickness zink coating 120 grams/sqm as per and polyester top coat 15-18 microns using self drilling/self tapping screws complete.Ridge plain(500-600mm)l
10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works¬OD276289/2025-2026:Supplying and fixing 150mm dia PVC rain water gutter semi circular section including fitting with 32mx5m MS flat supporters at 1m interval etc. complete—
11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.à9.95.6:Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:75x63x4 mmÚ9.97.3:Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:200x10 mm´
17.2.1:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lideachã17.32.4:Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plasti