SPECIAL REPAIR TO INDUSTRIAL CANTEEN, BLDG NO. P-03 AT NAD SUNABEDA UNDER GE (P) NAVY VISAKHAPATNAM

Amount

SCHEDULE 'A PART-I (B/R WORKS) Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Taking down chowkhats or frame with shutter without taking off shutter including Iron mongeries of any description from the frame exc 1.50 sqm but not exc 4 sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutter without taking off shutter including Iron mongeries of any description from the frame n exc 1.50 sqm each complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Non-skid ceramic colour tiles 7 to 8 mm thick, (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed.

S&F of Glazed ceramic coloured tiles in vertical surface 350x250mmx7mm/450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete as specified and directed.

M&L for Vitrified Ceramic Dark coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished fair and even complete all as specified and directed.

M&L for Vitrified Ceramic Dark coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendring in CM (1:4) as in skirting complete all as specified and directed.

M&L for Pre-polished Machine cut kota stone slab flooring 20-25mm thick over and including 20 mm thick screed bed in cement sand mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Pre-polished Machine cut kota stone as in skirting 20-25mm thick over and including 20 mm thick screed bed in cement sand mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Granite (of any type) 20 mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed.

Removal of existing water proof treatment of any description from roof surface including cement plaster/screed bed carefully from the surfaces, roughening concrete surfaces and cleaning the roof surfaces by brushing, sweeping and scrubbing down with water and removal of debris complete all as specified and as directed.

M&L PCC 1:2:4 type B1 using 20 mm graded aggregate as in roof padding, roof kerbs or mud stops and including demolition & removal of demolished materials complete all as specified and directed.

M&L for brushing cement slurry @ 2.75 Kg/sqm over cleaned roof surface prior to application of concrete complete all as specified and directed.

M&L for cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 or cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregates) as required complete all as specified and directed.

M&L 10 mm thick screed bed in cement mortar 1:3 over roof mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed. (NOTE: WPC will be measured and paid separately)

M&L for water proofing treatment on existing cleaned RCC roof with the following specifications and manufacturer's instruction complete all as specified and directed :- (i) Preparing and cleaning of fully dried surfaces as per IS 3067-1966. (ii) Applying bitumen primer conforming to IS:3384-1968 over the cleaned base @ 0.50 litre per sqm. (iii) Providing a layer of 3 mm thick APP modified pre-fabricated five layer, weight not less than 3.6 kg/sqm, black finished reinforced with non-woven polyster matt membrane with butane torch application. Overlap shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction. (iv) Applying two coats of bitumen based UV reflective paint with aluminium finish @ 0.10 litre per sqm over APP membrane.

S&F factory Made Solid PVC Moulded Door Shutter With Particle Board Core, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified.

S&F 2nd class Hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints

S&F of Plain, framed, panelled door shutters 2nd class HW 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats

S&F 2nd class HW 30 mm thick Glazed and skeleton window or ventilator shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares (with sash bars any numbers), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part- I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

S&F 100 mm size butt hinges of mild steel medium weight with brass/bronze hinge pin complete all as specified and directed.

S&F 75 mm size butt hinges of mild steel medium weight with brass/bronze hinge pin complete all as specified and directed.

S&F 150 mm size Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 125 mm size Aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed.

S&F 100 mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed.

S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, extruded sections and fixing bolts and sliding bolts of extruded sections.

S&F in repair mild steel as a small article as a hold fast or similar items complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded aggregate) as in steel frame filling/hold fast blocking incl necessary form work complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones 4 mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc.0.50 sqm in each pane complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc.0.50 sqm in each pane complete all as specified and directed.

S&F 4 mm thick figured glass, pin head type and glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane complete all as specified and directed.

S&F 5.5 mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares exc.0.50 sqm in each pane complete all as specified and directed.

S&F in repair 12 mm thick Prelaminatd particle board, interior grade, prelaminated both sides with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and directed.

S&F Anodised aluminium powder coated door shutters (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F powder coated anodised aluminium window and ventilator shutters side hung / sliding type without sash (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 Kg/m includingnecessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2 Nos) suitable handle (1 No) and rollers complete all as specified and directed.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed.

S&F in repair Door closer aluminium (extruded section body) hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. complete all as specified and directed.

S&F of Mortice Lock of 4 Lever, vertical type of size 100mm made of Brass complete all as specified and as directed.

S&F in repairs curtain rod of 18 mm dia mild steel, chromium plated with fixing brackets, stops, rollers etc, complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F Anodised aluminium snap grid frame work using T&L sections of size 610x610mm including cleats complete for false ceiling complete all as specified and directed.

S&F Hangers 6mm dia G.1 (Upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I 40 x 3 mm size 60 mm long complete all as specified and directed.

M&L for Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work form ceiling shall be measured and paid separately) complete all as specified and directed.

S&F 15 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors including taking down old unserviceable pipes complete all as specified and directed.

S&F 20 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors including taking down old unserviceable pipes complete all as specified and directed.

S&F 25 mm bore steel water tubing medium grade galvanised with and including all fittings and fixed to walls and ceilings or laid under floors including taking down old unserviceable pipes complete all as specified and directed.

S&F in repair of stainless steel sink with one side draining board made out of 1.00mm thick sheet for kitchen with plug washers, waste pipe, CI cantilever brackets, connection union overall size 1040mmx510mmx203 with bowl i.e. 510x405x203mm incl making good damaged surfaces with cement morter (1:3) to match with the existing and complete all as specified and directed. (Make: Prayag, Cat No 1344D or Equivalent)

S&F in repair 1mm thick stainless steel kitchen plate rack of size 786x760x254mm and fixing in position complete all as specified and directed. (Make: Prayag, Cat No P-346 or Equivalent)

S&F in repairs vitreous china (white) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts(except flushing cistern and flush pipe) incl seat cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair vitreous china (white) wash hand basin of size 550mm x 400mm incl providing 32mm dia CP wasted coupling, CP bottle trap bracket and making all necessary connections, fixed complete all as specified and directed.

S&F in repair fancy type chromium plated bib cock long body 15mm size with wall flange complete all as specified and directed. (Make: Prayag, Cat No. 9206 or Equivalent)

S&F in repair 15mm bore Stop valves fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair fancy type chromium plated pillar cock 15mm size without wall flange, complete all as specified and directed. (Make: Prayag, Cat No. 9204 or Equivalent)

S&F in repair for Tubular towel rail, Brass chromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. (Make: Prayag, Cat No BEA-40S or Equivalent)

S&F in repair of Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed.

S&F in repair of Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.

M&L PVC (Plastic polymer Cistern) valve less, Syphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length including PVC Connection pipe of 450mm length and making connections complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls/ floor complete including clamps for securing pipe complete all as specified and directed.

S&F in repairs PVC (SWR) bend with access door of any radius 110mm bore complete all as specified and directed..

S&F in repair PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls/ floor complete including clamps for securing pipe complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl 75mm dia complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing of CP Push cock, flush pipe and Union for discharge pipe including waste pipie and connection pipe complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description and taking out complete all as specified and directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for Cement concrete 1:2:4 (Type B1) using 20mm aggregate in surface channels and drains complete all as specified and directed.

M&L for Precast cement concrete in Cover slab type B1 1:2:4 using 20mm graded aggregate n.exc 150mm thick) for man holes, chullah hoods,chajjas,water troughs, mangers, shelves and similar articles with Plain Faces complete all as specified and directed.

M&L for RCC types A1 1:1.5:3 (20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including demolition complete all as specified and directed.

All as per Item No. 76.00 above but in chajjas

M&L for Formwork to soffits of suspended slabs rough finished concrete flat surface such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and directed.

M&L for TMT bars 10mm dia cut to length bent to shape etc as required and binding with and including MS wire (annealed) not les than 0.9mm dia as in reinforcement complete all as specified and as directed.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C2, using 40 mm graded aggregate as in plinth protection and finishing surface even and fair without using extra cement complete all as specified and directed.

M&L for Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 40mm thick as in base of flooring complete all as specified and as directed.

Dismantling of PVC water tanks of capacity of exc 500 ltrs and n exc 1000 ltrs complete all as specified and directed.

Supply, hoisting and fixing rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 1000 Litres, multi-layered (ISI marked), with GI tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I incl dismantling of existing unsv tank complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key scrubbing down with water etc including removal of rubbish material from site complete all as specified and directed.

M&L for rendering 15mm thick plaster in CM 1:4 in two layers (10mm and 5mm thick) mixed with water proofing compound with 5mm thick layer on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

M&L for 10mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement complete all as specified and directed.

M&L for 5mm thick plaster in cm (1:3) on fair faces of concrete surfaces of ceiling including finishing even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of exterior acrylic emulsion weather proof paint over a coat of primer to new wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufactuirer's isntructions complete all as specified and as directed.

M&L for preparation of new wall surfaces and applying two coats of white wash complete all as specified and directed.

M&L for preparation of new wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for applying two coats of white wash including preparaton of new surface on ceiling complete all as specified and directed.

Material and labour for complete removal of existing treatment and applying two coats of exterior acrylic emulsion weather proof paint over a coat of alkali resistant primer to old decorated surfaces of walls of any description, over 10cm width or girth not otherwise described, complete all as specified and as directed.

M&L for complete removal of existing treatment from wall surface applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for applying one coat of white wash on old ceiling including preparation of surface complete all as specified and directed.

SCH 'A' PART-II (INT ELECTRIFICATION WORKS) Taking down carefully copper /aluminiium point wiring ( light,fan,socket or power ) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets ,light fitting etc . Removing materials matrials to stores for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces of walls, floors complete all as specified and directed.

M&L for point wiring with PVC insulated, PVC unsheathed FR cable, single core, stranded, copper conductor cable 1.5 sqmm size, drawn in and including Non metallic rigid PVC conduit 20mm dia with all accessories concealed type and including PVC unsheathed FR cable , 1.5 sqmm stranded copper cable (green insulation) for continuous earth wire and including pressed steel concealed terminal boxes of required size of 2 mm thick, covered with 3 mm thick plastic laminated bakalite sheet, ISI marked for the following :-

One light point or fan/Exhaust Fan point controlled by one switch

One point for socket outlet 5 amp same board

One 3 pin socket outlet, 5 amps, independent

One 3 pin socket outlet, 15 amps. Independent , with cables 2.5 Sqmm size copper conductor cable with continuous earth wire of 1.5 sqmm copper conductor on independent board.

Supply and fixing metal flush box 6 module complete as directed

Supply and fixing metal flush box 4 module complete as directed .

Supply and fixing metal flush box 3 module complete as directed.

Supply and fixing metal flush box 2 module complete as directed.

Supply and fixing modular cover plate with frame 6 Module complete as directed .

Supply and fixing modular cover plate with frame 4 Module complete as directed.

Supply and fixing modular cover plate with frame 3 Module complete as directed .

Supply and fixing modular cover plate with frame 2 Module complete as directed.

Supply and fixing modular switch 6 amps Single module complete as directed .

Supply and fixing modular switch 16 amps Single module complete as directed .

Supply and fixing modular socket 6 amps 5 pin socket Single Module complete as directed .

Supply and fixing modular socket 6/16 amp 3 pin combined Single Module complete as directed.

Supply and fixing modular fan regulator 2 Module complete as directed .

S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body for surface type, bakelite 65x50mm three terminal

S&F lamp holder (angular) insulated body with back plate suitable for batten fittings all as specified & directed

S&F energy efficient light emmitting fluorescent light fitting 1x20 watt, four feet , white fittings with LED rod complete with all accessories & Provn of three core cable of copper conductor of size 0.75 sqmm, making necessary electric connetion from ceiling rose to fitting terminal , fixing the fitting on wall of including all necessary fixing accessories complete all as directed. (Make : Havells Cat part No - LHEXBLP7PN1W020 or equivillant in as mention in Make list of PS Clause)

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, lders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. (Make : BAJAJ Cat part No - BPRF 36W WH SL LED or equivillant as mention in Make list of PS Clause)

S&F energy efficient light emmitting fluorescent light fitting 1x10 watt Two feet LED tube light with LED rod complete with all accessories & Provn of three core cable of copper conductor of size 0.75 sqmm, making necessary electric connetion from ceiling rose to fitting terminal , fixing the fitting on wall including all necessary fixing accessories complete all as directed. (Make : Havells Cat part No - LHEXBLP7IN1W009 or equivillant as mention in Make list of PS Clause)

S&F LED bulb 9W, B22 holder based Cool Daylight lamp with polycarbonate body and aluminium heat sink with warm white all as specified and as directed

Taking down Existing old unserviceable Ceiling Fans/ Exhaust fans of any make and size/any condition, dismantling blades and removing fan and depositing to store complete all as directed.

Supply and Hanging, ceiling fan, with brushless DC motor, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) without remote, down rod, canopy, fan blades and accessories and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 1.0 Sq mm, 3 core, 1100 Volts grade, from ceiling rose/ connector to fan complete all as specified and directed. (MAKE : USHA, Model: TECHNOAIR / CROMPTON GREAVES, Model : ENERGION HS / ORIENT, Model: ECOTECH or equivalent model in BAJAJ / HAVELLS) NOTE: Old fan shall be deposited by contractor in MES storeyard

S&F exhaust fan 300 mm sweep, 900 RPM, heavy duty, AC Single Phase 230/240 volts, metal body, louvers complete with all accessories and connecting up with from ceiling rose to fan complete all as spcified and directed. (MAKE : HAVELLS, Model: Turbojet SP / CROMPTON, Model: EXHD300-6-1 / USHA, Model: Turbo Heavy Duty or equivalent model in BAJAJ / ORIENT) NOTE: Old fan, if any taken down, shall be deposited by contractor in MES storeyard.

S&F exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers complete all as specified and directed (MAKE: CROMPTON, Model : EXHD450-4-1 / USHA, Model: Turbo Heavy Duty or equivalent model in HAVELLS / BAJAJ)

S&F Building security light LED street light fitting 70 watt, made up of pressure die cast aluminum housing with high power LEDs with secondary optics, IP66 protection, LED street light with poly carbonate cover including GI Bracket made out of 40 mm dia medium grade GI tube up to 1.5 m long bend to shape 115 degree off set shape, fixed with 2 nos of suitable MS Flat clame of size 40x6 mm with necessary nut bolts & washers and applying two coats of aluminum enameled paint over one coat of zinc oxide primer for clamp complete all as specified and directed. (Make : Havells Model No. ENDURA OMNIPLUS or equivillant as mention in Make list of PS Clause)

M&L in repair for two single core (submain) PVC insulated FR cable with 6 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated FR cable 6 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit including all conduit and fixing accessories, concealed in wall including cutting chases and making good disturbed surface to match complete all as specified and directed.

Earthing complete with Galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 4 mm GI Wire [Earth Lead] and GI pipe 15 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 5 of SSR Part – I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified and directed.

S&F in repair MCB DB, TPN, 4 Way, 415 Volts, sheet steel phospetised powder coated, Vertical, with DIN Channel, Double Door with 200 Amps rated bus bar 415V nautral link suitable for mounting MCBs, IP:43 protection complete all as specified and as directed

S&F in repair MCB DB double door ,IP 43 protection single pole and neutral 8 way sheet steel phospetised powder painted with 200 amps rated bus bar 240V natural link complete

S&F in repair MCB DB double door ,IP 43 protection single pole and neutral 12 way sheet steel phospetised powder painted with 200 amps rated bus bar 240V natural link complete

S&F MCB SPN 32 Amps, 10 KA rating, complete all as specified and directed

S&F MCB TPN 63 Amps, 10 KA rating complete all as specified and directed

S&F MCB SP 6 to 32 Amps, 10 KA rating complete all as specified and directed

M/s Jai Sree Hari (BID ID -3162200)

SMART ENERGY SOLUTIONS (BID ID -3161869)

SHREE JAGANNATH CONSTRUCTION (BID ID -3164077)

M/S SANTOSH SATAPATHY (BID ID -3163911)