CONSTRUCTION OF COMPOSITE COURT BUILDING AT DOMKAL, MURSHIDABAD UNDER BERHAMPORE DIVISION NO.II- EI WORKS FOR LIFT ROOM, GLOW SIGN BOARD and FALSE CEILING ALLIED FIXTURES.

Amount

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed]Avg Run 5mtr(LIFT ROOM)

S & F 230 V double door (2+8) way SPN MCB DB (Legrand make) in sheet steel enclosure IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment outgoing consisting of 8nos. 6-10 Amp. SP MCB (C - curve, 10 KA) and 1 no. 40 Amp. D.P. isolator. make Legrand (Lift room)

S& F 230v , 300MM (12'') Sweep heavy duty wall bracket fan silent operation and of 1350rpm with S&F necy. Rag bolt nuts washer and fixing materials on wall and mending good the damages as per direction of EIC(Make crompton/orient) (False Ceiling)

Supply & Fixing 230V, 20W LED low height downlighter with PDC Al. housing, Colour Temp. 5700-6000K and making necy. Connections as per G.S Cat No. SM251C LED 20S-6500 PSU WH or equivalent. (Make Crompton /Philips/Jaquar) (Judges Chamber)(False Ceiling)

S & F Phase Reversal Controller & Auto Changeover in SS double door phosphatised powder coated Suitable size DB, din rail with IP-43 protection with electrical accessories & front door locking arrangement with all connection, a) 6 A FP MCB (10kA, C curve)-1no, cat no-BB30060C, MCB housing should be thermostat materials( fire retardant). b) 50 A FP Power Contactor( MNX 50,50 A)-2no, Cat No.-CS97075,(Make- L&T) c) SPPR type Sz5 (6 Wire), 415V (For MU-G10/10H),Cat no. – CS94824DOOO,-1 no(Make- L&T) d) Indicating lamp Red/Green 415V (1 no Green,1 No Red),Cat No-CS94810DOOO] (Make- L&T) e) Suitabale Size MS DOUBLE DOOR DB- DB should have door reversibility feature, inbuilt pad locking facility as to GS, 1 no(Approved Make) [For 8.5 Ton A.C Machine]

S & F Phase Reversal Controller & auto changeover in SS double door phosphatised powder coated Suitable size DB, din rail with IP-43 protection with electrical accessories & front door locking arrangement with all connection,, a) 6 A FP MCB (10kA, C curve)-1no, cat no-BB30060C, MCB housing should be thermostat materials( fire retardant). b) 70 A FP Power Contactor( MNX 70,70 A)-2no, Cat No.-CS96576,(Make- L&T) c) SPPR type Sz5 (6 Wire), 415V (For MU-G10/10H),Cat no. – CS94824DOOO,-1 No(Make- L&T) d) Indicating lamp Red/Green 415V (1 no Green,1 No Red),Cat No-CS94810DOOO] (Make- L&T) [For 11 Ton A.C Machine]

S&F of 3 Phase timer controller in suitable size SS double door phosphatised powder coated Suitable size DB, din rail with IP-43 protection with electrical accessories & front door locking arrangement with all connection. a)63A FP Isolator-1No.(L&T) b)40A TP power contactor AC1 rating 40A. ML2-Cat No. SS90701 c)Daily/week;y programable digital time switch cat no. AUTS02DIG00 d) 63A TP MCB- 1 No. e) Suitabale Size MS DOUBLE DOOR DB- DB should have door reversibility feature, inbuilt pad locking facility as to GS, 1 no(L&T/Approved Make)

Supply & Fixing GI sheet 30 cm Exhaust fan (12") (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall with necy. bolts & nuts (6 mm dia x 62 mm long) for 30 cm Exhaust fan (12")(Lift Room)

S & F of 12" sweep AC exhaust fan incl. making hole on wall with nuts & bolts as required with louver shutter. (EPC heavy duty/ Crompton Greaves) 1420 r.p.m incl. necessary connections. (Lift Room)

Supplying & fixing sheet metal (16 SWG) 4 x 20x5mm,Al., 415 V, 63 A, Iron Clad Busbar chambers 500x150mm on angle iron frame on wall, incl. earthing attachment and painting as required – (As per Drawing no. 470 of PWD Specification Book – May 1991) (Lift Room)

S&F of 1No.s 110-240V,50Hz 3 - 30 secs. Daily/weekly basis programmable digital Timer switch l&T ST-100 ST80328OOOO in DIN rail incl. fixing DIN rail in suitable size MS box. (Lift Room)

Supplying and fixing 415V, 63A TPN SFU with sheet steel enclosure on flat iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Lift Room)

Supply & fixing of mid Bay lumineries with pressure die cast Al housing/PDC Housing & heat resistant touchend flat glass (IP 66 & IK08) complete with all accessories Cat No. BY1055P LED76S CW PSU HE SY120 or equivalent(make- Crompton/Phillips/Bajaj) Entrance

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in 19mm polythene pipe and by the prelaid GI fish wire and making necy. connection as requiredA) 3 x 22/0.3 (1.5 sqmm)

a)S&F of 230V, Skycove LED stip (LED Strip SKYCove 5M WW with driver) 2700-3000K incl. necy. Connections as per G.S (Philips)

b)S&F of 230V, Skycove LED stip (LED Strip SKYCove 5M CW with driver) 5500-6000K incl. necy. Connections as per G.S (Philips)

Supplying & Fixing CRC sheet metal (16 SWG) Switch Board of size 7"x4" for 2 No.s 6A switch and 1 no. 6A plug socket (Brand approved by EIC), without switch & plug top Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing of Endura-LED Bulkhead (make Philips/Crompton) incl necessary connections. Cat No. WT202W LED6S CW PSU S2 PC (Lift Well+Basement)

Supply and fixing 230V 40W decorative post top for 360'indirect light with IP 65 Protection Cat No. LPTO-40-CDL (Maple) Make Crompton/Philips/Jaguar incl. necy connections. (Gate Light)

Supply & Delivery of the following size 1.1 kv.gr. XLPE/PVC armoured cables as below (Havells/ Glostor) with 2 nos.10 SWG G.I wire a) 3.5 Core 25 Sq.mm cable (VTPN to lift room)

Laying of cable 3.5 Core 25 Sq.mm cable (VTPN to lift room), on existing Cable Tray and binding with suitable size GI wire

Laying of cable 3.5 Core 25 Sq.mm cable (VTPN to lift room), after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry XLPE/PVC armoured of 3.5 Core 25 Sq.mm cable (VTPN to lift room),

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 3.5 Core 25 Sq.mm cable (VTPN to lift room),

Supply, installation, testing and commissioning of LED illuminated 16’ x 4’ x 3” size sign board made of 1” x1” Iron hollow square bar with sufficient support bar in between the structure and fitted in wall with L channel and angle iron at the front side of the building. Thickness of the board in four side including 3’’ back side of the board should be covered with same ACP sheet and back portion of the board should be covered with 20 swg aluminum sheet to resist unwanted water seepage. 3 mm ACP of blue colour in the front of the structure and milky white 2.0” projected laser cut male and female acrylic letter will be fixed at the top of the ACP sheet with dark colour of acrylic sheet in side of male part to resist unwanted illumination from side of the letter.

letter will consist of 1.5 watt sufficient Nos of water resist outdoor type LED module (make Bajaj / GE/Samsung) including supply and fixing controller in MS box outside of the structure.LED should cool milky white in colour, minimum 10000 burning hours, should have similar intensity at every point on the board, and should operate satisfactory up to 50 degree centigrade. Acrylic letter will be fixed on ACP base with such space so that all letters may read clearly from sufficient distance the four edges of the Boards should be fixed 40mmx40mm angle sheet channel with necessary steel screw .The cost including carrying (from companies work shop to site) and scaffolding charges(for 4 storied building) and painting with 2 coat of RO primer and one coat of synthetic enamel paint. The letter of following inscription below as per direction of EIC:- Tentative matter & final matter willbe approved by authority.

ASIM KRISHNA MODAK

G.M.N. ENGINEERING

R.T.ELECTRICALS

U. B. ELECTRICALS