Renovation and Refurbishment of PIU-ARDD, Office for Electrical Installation

Wiring for light/fan/exhaust fan/call bell point with 2 x 1.5 sq. mm pvc insulated copper conductor cable (FR) in pvc casing and capping complete with wooden awitch board with bakelite cover and piano type switch including connection etc as required :- a)Short Point

b)Medium Point

c)Long Point

Providing and fixing of 3 pin 5/6 amps plug point with piano type 5/6 amps switch and socket including connection with 2 x 1.5 sq. mm PVC insulated copper conductor cable(FR) on switch board, ear thing the 3rd pin etc. as required :-

Providing and fixing of 3/6 pin 15/16 amps plug point with piano type 15/16 amps switch and socket including connection with 2 x 2.5 sq. mm PVC insulated copper conductor cable(FR) on switch board, ear thing the 3rd pin etc. as required :-

Wiring for circuit/Sub-main with following sizes PVC insulated copper conductor cable (FR) in PVC casing and capping etc. as required a) 2 x 1.5 sq mm

b)2 x 2.5 sq mm

c)2 x 4 sq mm

d)2 X 6 sq mm

e) 2 X 10 sq mm

k)3 X 10 sq mm

Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/surface including connection etc. as required:- a)1 X 1.5 sq mm

b)1 X 2.5 sq mm

c)1 X 4 sq mm

d) 1 X 6 sq mm

Supplying and fixing of MS fram made of (25mm x 25mm x 5mm) MS angle with necessary support by (40mm x 6mm) MS flat and 12 mm thick marine plywood on top, grouted on wall with 4 nos legs (25mm x 25mm x 5mm MS angle 20 cm long) finished with red oxide and 2 coat synthetic enamel paint including necessary cc work, mending the damages & painting etc as required :-

Supplying and installation of powder coated steel sheet enclosure for 415 volts MCCB (TP/FP) complete with necessary connection etc as required:- b) Enclosure suitable for MCCB above 100 amps upto 250 amps:-

Supplying & installation of TP/FP/MCCB of following ratings in the existing MCCB enclosure/ panel board including connection etc as required (Ics=100% of Icu with adjustable settings):-

Supplying and installation of Bus bar chamber of the following ratings and sizes made of steel sheet enclosure with all accessories including necessary connection etc. as required:- d)100 amps 415 volts four strip Copper busbar chamber 4 ways of size (455mmx330mmx120mm):-

Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required. i)(2+6) / 8 way SPN MCB DB (double door):-

ii)(2+10) / 12 way SPN MCB DB (double door):-

Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as required:- a)6 to 32 amps SP MCB:-

b)6 to 32 amps DP MCB:-

Supplying and laying of the following sizes XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required.

Supplying and fixing of the following sizes wooden switch boards with 3mm thick bakelite cover etc. as required. a)102mm x 102mm (4" X 4") :-

b) 102mm x 178mm (4" X 7") :-

c) 152mm x 203mm (6" X 8") :-

d) 203mm x 254mm (8" X 10") :-

e) 203mm x 300mm (8" X 12") :-

Supplying and fixing of the following electrical accessories including necessary connection etc. as required. a)5/6 amps piano type switch

e)16/20 amps piano type switch

g) 5/6 amps piano type call bell push

i)3 pin 5/6 amps piano type socket

k)3/6 pin 16/20 amps piano type socket

m)Electronic 4 step mini fan regulator

u) Ding dong call bell

Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):- m)Surface mounted round/Square shaped 12 watt LED downlight with integral driver and high quality polycarbonate diffuser:-

Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:- g)14 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :-

Supplying & fixing of 40 mm dia G.I pipe (medium gauge) cross bar for fixing of ceiling fan/luminaries including painting & necessary accessories etc as required.

Supplying & fixing of 40mmx6mm MS clamp for installation of ceiling fan/luminaries on cross bar including necessary accessories etc as required:-

Supplying & fixing of 1200 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod, canopies, shackles, 3 nos blades, including wiring the down rod with 2 x 1.5 sqmm PVC insulated copper conductor cable (FR) (ISI market, BEE 1 star/ minimum service value 4.0 m3/min/W) :-

Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. i)1-2 module plastic switch board:-

Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required. a)1-2 module :-

Supplying and fixing of the following modular accessories including necessary connection etc. as required. r)20/25 amps single phase motor starter switch (2M):-

Supplying and fixing of following luminaries complete with necessary accessories and connection etc. as required (Commercial lighting fixtures with 50,000 burning hours):- a)Box type single FTL fittings of CRCA steel sheet housing complete with 36/40 W FTL, electronic ballast and high quality reflector cover : -

Please Enable Macros to View BoQ information