Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹94.8 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹97.7 L+₹2.8 L (3.00%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹99.4 L+₹4.6 L (4.82%)Admitted-Finance | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | UNIQUES L1 | SUNANDA ENGINEERING L3 | A.M. Marketing L2 |
|---|---|---|---|---|---|---|
| 1.00 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt). Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test , report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 150 watt. (Make- Havells, Panasonic, Orient Electric, Osram,Jaguar as per the choice of EIC) | 200 | Each | 6,057 ₹12,11,400 Lowest | 6,200 ₹12,40,000 | 6,238.81 ₹12,47,762 |
| 2.00 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt). Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 72 Watt (Make- Havells, Philips, Wipro, Crompton) | 400 | Each | 3,067.82 ₹12,27,128 Lowest | 3,100 ₹12,40,000 | 3,159.85 ₹12,63,940 |
| 3.00 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt). Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC,
frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 50 Watt (Make- Havells, Panasonic, Orient Electric, Osram,Jaguar as per the choice of EIC) | 300 | Each | 2,600.15 ₹7,80,045 Lowest | 2,800 ₹8,40,000 | 2,678.15 ₹8,03,445 |
| 4.00 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 1.5 sq. mm | 6,800 | Mtr. | 123.76 ₹8,41,568 | 120 ₹8,16,000 Lowest | 127.47 ₹8,66,796 |
| 5.00 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. | 7,200 | Mtr. | 99.96 ₹7,19,712 Lowest | 110 ₹7,92,000 | 102.96 ₹7,41,312 |
| 6.00 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc and foundfation as per drawing provided by the pole manufacturer and dirtection of E-I-C. Above 4.5 Meter and upto 6.5 Meter, Foundation base should be minimum size of (450mmX450mmX450mm) with plaster and net cement punning completed with smooth finishing. | 30 | Each | 7,286.37 ₹2,18,591.1 Lowest | 8,000 ₹2,40,000 | 7,504.96 ₹2,25,148.8 |
| 7.00 | Supplying and erection of galvanised 'D' iron clampscomplete with shackle insulator (100 mm X 110 mm),G.I. bolts, nuts and washers, coach screws etc. as required. | 870 | Set | 411.17 ₹3,57,717.9 Lowest | 500 ₹4,35,000 | 423.51 ₹3,68,453.7 |
| 8.00 | Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated & sheathed wire (single core) partly in GI conduit & partly through above bracket from OH line to the fitting, without control switch, incl. making connections and painting. | 870 | Set | 1,785.32 ₹15,53,228.4 Lowest | 1,850 ₹16,09,500 | 1,838.88 ₹15,99,825.6 |
| 9.00 | 7 Mtr. HDG Octagonal Poles in 3mm shaft thickness in MS Condition before Galvanization with Top A/F 70 mm, Bottom A/F 135 mm, Base Plate 225x225x16 mm suitable for wind speed 180 Km/hr. as per IS:875 and 4 Nos. M20x600 “J” Type Foundation Bolts as per EN-8 (Min UTS -600) & Anti -theft locking door arrangement for safety of MCBs, Terminal etc. A)Material grade of shaft shall be of S355 JR as per BSEN 10025 or Equivalent IS: 2062 grade E350 (BR) B)Materials grade of Base Plate shall be E250(BR) as per IS:2062 C)Galvanization as per BSEN ISO:1461 D)Fusion Welding as per ISO 3824 -2:2021 E)All Tests are to done from OEM own -in -house NABL accredited Lab for proper quality control. Valid NABL lab certificate to be uploaded in tender. F) OEM having own in -house galvanization facility for betterment of quality of the product. OEM Factory license to be uploaded in tender. G)Following documents are to be required to process the bills 1)Raw Material Test Certificate of Pole Shaft (IS:2062 grade E -350 BR) Make of HR Coil TATA/ SAIL/ JSW/JSPL/RINL 2)Raw Material Test Certificate of Base Plate (IS:2062grade E -250 BR) Make of Plate TATA/SAIL/JSW/JSPL/RINL 3)Raw Material Test Certificate of bracket Pipe (IS:1239 grade) from any reputed BIS Make. 4) Raw Material Test Certificate of Zinc (Zn) Make Hindustan Zinc (Vedanta)5)Raw Material Test Certificate of Foundation bolts (ENGrade EN 8 and UTS.>600) any reputed BIS ( Make Transrail/Valmont /Bajaj/Skipper/Utkarsh ) | 30 | Set | 20,141.42 ₹6,04,242.6 Lowest | 22,000 ₹6,60,000 | 20,745.66 ₹6,22,369.8 |
| 10.00 | 1000 mm HDG Single Arm Bracket made of (48.3ODx2.9 thik.) Mild Steel Pipe as per IS:1239 suitableto insert at Pole Top A/F 70 | 30 | Set | 1,668.52 ₹50,055.6 Lowest | 1,700 ₹51,000 | 1,718.58 ₹51,557.4 |
Tender Value
Refer Docs
EMD Value
₹1.8 L
Closing Date
23 Sept 2026, 3:00 pmClosed
Sudipta Bose (EE/EL)
nbdd uttarkanya
Supply and Installation of LED Street Lights with 7 meter octagonal pole For Raiganj Municipal Area in the district of Uttar Dinajpur.
2026_NBDD_1040662_2
NBDD/BS/EE /NIQ-23 - (EL) of 2026-2027
Open Tender
Electrical Work/ Equipment
Item Rate
120 days
Uttar Dinajpur
Please refer Tender documents.
6 documents required · 6 mandatory
₹1.8 L
Yes
8 Oct 2026
7 Sept 2026
25 Sept 2026
7 Sept 2026
23 Sept 2026
7 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt). Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED,Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test , report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 150 watt. (Make- Havells, Panasonic, Orient Electric, Osram,Jaguar as per the choice of EIC) | 200 | Each | - | - |
| 2 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt). Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 72 Watt (Make- Havells, Philips, Wipro, Crompton) | 400 | Each | - | - |
| 3 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy >135 lm/Watt). Supplying, Installation, Testing & Commissioning of Street light LED fixture, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC,
frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitary) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 50 Watt (Make- Havells, Panasonic, Orient Electric, Osram,Jaguar as per the choice of EIC) | 300 | Each | - | - |
| 4 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 1.5 sq. mm | 6,800 | Mtr. | - | - |
| 5 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. | 7,200 | Mtr. | - | - |
| 6 | Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc and foundfation as per drawing provided by the pole manufacturer and dirtection of E-I-C. Above 4.5 Meter and upto 6.5 Meter, Foundation base should be minimum size of (450mmX450mmX450mm) with plaster and net cement punning completed with smooth finishing. | 30 | Each | - | - |
| 7 | Supplying and erection of galvanised 'D' iron clampscomplete with shackle insulator (100 mm X 110 mm),G.I. bolts, nuts and washers, coach screws etc. as required. | 870 | Set | - | - |
| 8 | Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated & sheathed wire (single core) partly in GI conduit & partly through above bracket from OH line to the fitting, without control switch, incl. making connections and painting. | 870 | Set | - | - |
| 9 | 7 Mtr. HDG Octagonal Poles in 3mm shaft thickness in MS Condition before Galvanization with Top A/F 70 mm, Bottom A/F 135 mm, Base Plate 225x225x16 mm suitable for wind speed 180 Km/hr. as per IS:875 and 4 Nos. M20x600 “J” Type Foundation Bolts as per EN-8 (Min UTS -600) & Anti -theft locking door arrangement for safety of MCBs, Terminal etc. A)Material grade of shaft shall be of S355 JR as per BSEN 10025 or Equivalent IS: 2062 grade E350 (BR) B)Materials grade of Base Plate shall be E250(BR) as per IS:2062 C)Galvanization as per BSEN ISO:1461 D)Fusion Welding as per ISO 3824 -2:2021 E)All Tests are to done from OEM own -in -house NABL accredited Lab for proper quality control. Valid NABL lab certificate to be uploaded in tender. F) OEM having own in -house galvanization facility for betterment of quality of the product. OEM Factory license to be uploaded in tender. G)Following documents are to be required to process the bills 1)Raw Material Test Certificate of Pole Shaft (IS:2062 grade E -350 BR) Make of HR Coil TATA/ SAIL/ JSW/JSPL/RINL 2)Raw Material Test Certificate of Base Plate (IS:2062grade E -250 BR) Make of Plate TATA/SAIL/JSW/JSPL/RINL 3)Raw Material Test Certificate of bracket Pipe (IS:1239 grade) from any reputed BIS Make. 4) Raw Material Test Certificate of Zinc (Zn) Make Hindustan Zinc (Vedanta)5)Raw Material Test Certificate of Foundation bolts (ENGrade EN 8 and UTS.>600) any reputed BIS ( Make Transrail/Valmont /Bajaj/Skipper/Utkarsh ) | 30 | Set | - | - |
| 10 | 1000 mm HDG Single Arm Bracket made of (48.3ODx2.9 thik.) Mild Steel Pipe as per IS:1239 suitableto insert at Pole Top A/F 70 | 30 | Set | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.72 MB
Tendernotice_2.pdf
PDF • 0.51 MB
BOQ_2555830.xls
BOQ • 0.35 MB
CORRi.pdf
PDF • 1.71 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .