Providing and Erecting Solar Streetlights at New Fly-Over Bridge & Sevice Road at Khali Circle, Mahesana-Palanpur highway, Ta.-Siddhpur Dist.:Patan

Name of work:-Providing and Erecting Solar Streetlights at New Fly-Over Bridge & Sevice Road at Khali

Circle, Mahesana-Palanpur highway, Ta.-Siddhpur Dist.:Patan

Rate at which the materials

SR Quantity Perticulars Place of delivery

will be charged to the

Signature of contractor

Deputy Executive Engineer Executive Engineer

Patan Elect (R&B) sub division Mehsana R&B Elect. Division

Name of Work : Providing and Erecting Solar Streetlights at New Fly-Over Bridge & Sevice Road at Khali Circle, Mahesana-

Palanpur highway, Ta.-Siddhpur Dist.:Patan

Item Qty Unit Net Rate Rate In Words Amount Rs.

No. Item Description Rs.

1 S.I.T.C. of LED Solar street lights fixture with High power White LEDs 162 Nos 45551.00 Rupees Forty

wattage of 2Watt and above assembled on single MCPCB thermal Five Thousand

conductivity or more than ≥ 2.0 W/m, efficiency more than 140 lm/w with Five hundred

inhouse testing facility and corrosion free High pressure die cast Fifty One Only

aluminum housing (LM6 with certification) with smooth finish powder

coated and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses with company mark/name engraved or embossed with

hours battery backup & MPPT 24V, 7.5 A charge controller with required

protections including over-charge, deep discharge, reverse polarity and

short circuit protection, 12 hours automatic switch on/off. The complete

solar street light system shall provide minimum 36 hours battery backup

and shall be designed to withstand wind speeds up to 44 m/s, compliant

with IEC 61215 standards.

120W LED Solar Luminaire all in one model complete with MPPT charge

controller and required protections.

High efficiency Monocrystalline Solar PV Module, suitable capacity to

charge the specified battery within standard sunlight hours under STC

conditions, complete with mounting accessories.

Battery size - 25.6 V 90AH LiFePO4 BACK UP- UP TO 36 Hrs.

Solar panel - 225 watt solar pv module mono 36-40 V.

Solar streetlight , solar panel & Battery needs to fix in one common fixture

suitable for bracket mounting. (Make : Bajaj,Luker,Halonix,

Jaquar,Surya,Greatwhite)

2 Supplying & erecting Steel tubular pole (Swaged) confirming to IS -

(Part-II) 1980. Manufacturing process of steel tubular pole should be as

per IS specification. Basic steel tube should be ISI Marked. Pole should

be painted by one coat of Zinc comet Primer and two coat of Aluminium

/approved paint to be erected on / in existing Foundation. The length of

poles are as below.

(A) 7.5 mtr. Long Swaged Steel tubular pole

(i) pole as per IS code 410-SP-4 with 300 X 300 X 4 mm base plate with 54 Nos 7246.75 Rupees Seven

necessary G.I. J Bolts (Approximate Pole weight 67 Kg) For burial Thousand Two

erection hundred Forty

((iii) Add Extra for PU base primer and PU Paint on pole.ffeners welded 54 Nos 386.83 Rupees Three

with pole. hundred Eighty

(B) 8.5 mtr. Long Swaged Steel tubular pole

(i) Pole as per IS code 410-SP-16 with 300 X 300 X 4 mm base plate 27 Nos 8148.68 Rupees Eight

with necessary G.I. J Bolts (Approximate weight 75 Kg) For burial Thousand One

erection hundred Forty

(iii) Add Extra for PU base primer and PU Paint on pole. 27 Nos 443.39 Rupees Four

3 Providing 1:2:4 cement concrete foundation & 70 % PCC from bottom 81 Nos. 1292.80 Rupees One

including excavation for the pole of size 60 x 60 x 120 cm. Deep in below Thousand Two

ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high hundred Ninety

upper ground level with necessary curing and finishing in approved Two Paise

manner. ( for 7.5 & 8/8.5 mtr pole) Eighty Only

4 Providing and erecting street light pole bracket comprising main B Class

GI pipe of 4.2 cm/require outside dia. complete with suitable B Class G.I

sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. /

require size pole top having sufficient fasteners for fixing the brackets and

having sprNos.d of 1 mtr. length with suitable rise as per site condition &

suitable welded stiffener reducer and nipple with check nut complete

painted with one coat of Red oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of arms.

[A] Single Arm bracket 1 Mtr 76 Nos. 614.08 Rupees Six

[B] Double Arm Bracket 1 Mtr 43 Nos. 829.21 Rupees Eight

5 Providing , erecting , fabricating the M.S. structure as per requirement on 1620 kg 77.77 Rupees

site incorporating proper size of M.S. angles,square,round, flats, bars, Seventy Seven

channels, sections complete with cutting, welding, grinding & finishing Paise Seventy

duly painted with one coat of red oxide with erection on site as per Seven Only

direction of engineer in charge with necessary grouting, cementing,

plastering & finishing complete.

Amount In Words

Rupees Eighty Three Lakh(s) Thirty Six Thousand Four Hundred Ninety One And Paise Fifty Two Only

I / We am / are willing to carry out the work at ___________________________

above / below ___________________________________ percent ( should be written in figures and words )

below / above the tendered rates mentioned above.

Amount of my / our tender works out as under :-

Estimated amount Estimated amount

put to be tender Rs. _____________ put to be tender Rs. _____________

Deduct ______% below Rs. _____________ Add ______% above Rs. _____________

In words :- In words :-

* Please strike out whichever is not applicable.

1. I / We hereby declare that I / We have visited the site and fully acquited myself / ourselves

with the local situtaion regarding materials, labour and other factors pertaining the work

before submeeting this tender.

2. I / We hereby declare that I / We have carefully studied conditions of contractors,

specifications and other the tender documents of this work and agree to work execute that

same accordingly.

3. Approval of Material used in the above work shoud be approved from the Executive Engineer R&B Elect. Division before the

startting of the work. Incase of failure of to do this , All liability of the agency will be fixed and all material will be removed

on agency expense and risk.

Sign of Contractor

Deputy Executive Engineer Executive Engineer

Patan Elect (R&B) sub division Mehsana R&B Elect. Division