Construction of M.B.A. Block for Govt. College Dharamshala, Distt. Kangra (H.P.)

Amount

Excavation in foundation, trenches etc. by mechanical means (Hydraulic excavator)/ manual means in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, including shoring, shuttering and pumping out water upto any depth or any quontam of water including slush which may be arise during de-watering removal of slush and stacking the serviceable and un-serviceable material clear from the edge of excavation as direction of Engineer-In-Charge and retuning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths, sides of foundation etc; consolidating each deposited layer by ramming, watering and then disposing of all excavated earth as directed by the Engineer-in-Charge, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rates inclusive of octori, royality, Malkhana, toll taxes, GST and any other taxes imposed by the Government.

Filling in plinth with sand of approved quality under floors including watering ramming, consolidating and dressing complete as per HPPWD specifications and as directed by Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings as per Architectural drawing and the like within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers girders and lintels sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depths within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns pillar posts and struts Square, rectangular or polygonal in plan within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetres) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls under any thickness within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in weather shade, Chajjas, corbels etc including edges as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax,GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Window sills,string courses ,bands, copings,bed plates, anchor blocks as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax ,GST and any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate 40mm (Forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, royality, octroi, toll tax,GST and any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (Forty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GST and any other taxes imposed by the Government.

Stone filling in plinth with approved quality under floor including watering, ramming, consolidating and dressing complete within all leads, lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Coursed rubble masonry brought to courses with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement is to six sand is to twelve graded crushed/broken stone aggregate 20mm (twenty millimeter) nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand) and curing complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (Twenty) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter) with cement contents not less than 330 kg (three hundred thirty Killogramme) per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in all works up to plinth lavel to give smooth surface mechanically mixed and vibrated including curring complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering,finishing and reinforcement,including admixtures in recommended proportion as per IS ; 9103 to accelerate, retard setting of concrete improve workability without impairing strength and durability for reinforced concrete work complete including carriage of material as per approved specification drawing , design and as directed by the Engineer in charge within all leads lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax,sale tax ,GST and any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced concrete work Grade M-20 (Twenty) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter) with cement contents not less than 320 kg (three hundredtwenty Killogramme) per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in all works above plinth lavel to all floor level to give smooth surface mechanically mixed and vibrated including curring complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering,finishing and reinforcement,including admixtures in recommended proportion as per IS ; 9103 to accelerate, retard setting of concrete improve workability without impairing strength and durability for reinforced concrete work including of material within all leads lifts and other incidentals as per approved specification drawing , design and as directed by the Engineer in charge within all leads lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax,sale tax ,GST and any taxes imposed by the Government.

Providing and laying Tor steel of TATA Tiscon /SAIL reinforcement thermo mechanically coated bars of grade Fe 500D for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wire and other incidentals for its completion up to all floor levels as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying damp proof course 100mm (one hundred millimeters) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty decimal five millimeter) nominal size and curing complete including cost of form work and as required at site and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, Toll Tax Sales tax,GST and any other taxes imposed by the Government.

Applying a coat of hot bitumen mexphalt 80/100 (eighty/hundred) or equivalent using 1.70 Kgs. (one decimal seven zero kilogramms) per square meter on damp proof course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil including carriage of materials within all leads, lifts and other incidental and as per the direction of Engineer-in-Charge. The rate inclusive of Malkhana, Octroi, Toll Tax Sales tax,GST and any other taxes imposed by the Government.

Half Brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) in super structure above plinth level upto all floor level in cement mortar 1:4 (one cement isto four sand) and curing complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) above plinth level upto all floor level in cement mortar 1:6 (one cement isto six sand) and curing complete as per approved drawing, design, specification and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing M.S. channels Frames 75 X 40X4 mm (seventy five into forty in to Xfour millimetre) for doors, windows, frames manufactured from ISMC 75mmx40mm x4mm (seventy five into forty Xfour millimetre) with M.S. flat 75mm x4mm (seventy five into four millimetre) in combination as per drawing and design including hinges, jamb, lock jamb beed and if required thrashold including thrashold of M.S. angles means lugs, with split and tails to each jamb including iron butt hinges 2.5mm (two point five millimetre) thick with a provision of locking arrangement and shock observers as specified and applying a coat of approved steel primer after pre-treatment of the surface complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST and any other taxes imposed by the Government.

Providing and fixing factory made ISI markedZ-section steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etcetera complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, Fixing with 15x3 mm (fifteen in to X three millimetre)lugs 10 cm (ten centimetre) long embedded in cement concrete block 15x10x10 cm (Fifteen in to ten into ten into ten centimetre)of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm (twenty milimetre)nominal size)complete all as per approved design, (sectional weight of only steel as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax,GST and any taxes imposed by the Government.

Providing and fixing single / Double rebate angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm (thirty five into thirty five intofive millimetre) joints mitred and welded by angle iron 35x35x5 mm (thirty five into thirty five intofive millimetre) with 50x 4 mm (fifty into four millimetre) flat pieces to the existing Tiron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST and any other taxes imposed by the Government. .

Providing and fixing factory made panel 30mm (thirty milimetre)thick pre laminated of Rajshri Prominance / Supreme PVC door shutter consisting of frame made out of M.S. tubes of 19 (ninteen)gauge thickness and size of 19 mm x 19 mm (ninteen into nineteen milimetre)for styles and 15x15 mm (fifteen in to fifteen milimetre)for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm (thirty milimetre)thickness, 70 mm (seventy milimetre)width out of which 50 mm (fifty milimetre)shall be flat and 20 mm (twenty milimetre)shall be tapered in 45 (forty five milimetre)degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm (twenty milimetre)shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (ten milimetre) (5 mm x 2 ) thick, 20 mm (twenty milimetre)wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm (fifteen milimetre)wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm (five milimetre) thick PVC strip of 20 mm (twenty milimetre)width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing carriage of material within all leads, lifts and other incidental Charges. The rate is including Royality, Malkhana, Octroi, Toll Tax, Sale Tax, GSTand any other taxes imposed by the Government. ..

Providing and fixing M.S. grills (TAta Tiscon/SAIL)of required pattern in frames of windows etcetra with M.S. flats, square or round bars etc. including priming coat with approved steel primer Fixed to steel windows by welding .all complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 40 mm (forty milimetre)thick second class deodar wooden penelled shutter having infill panels of 12mm (Twelve millimetre) thick Phenol Bonded (Both Sides) Prelaminated BWP Grade Partical Board in Matt Finish ISI marked is No. 12823 of action Tesa/ Greenlam/ Merinolam/Kitlam/Vista as per ISI and approved shade as per PWD specification, drawing and design. and entire satisfaction of Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. Rate inclusive toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 35 mm (thirty five milimetres) thick ISI marked flush door shutters both side commercial phenol bonded of CENTURY/ALPRO/DURO PLY / GREEN PLY No.1S-2202 to be finished with mica lamination of approved shade conforming to ISI marked flush door shutters : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges with necessary screws.as per PWD specification, drawing and design. and entire satisfaction of Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)(twelve point five zero kilograme per square metre) of Modi Guard / Saint Gobain glazing in door, window, ventilator shutters and partitions etcetra with EPDM rubber / neoprene gasket etcetra complete as per the architectural drawings and the directions of engineer-in-charge including carriage of material within all leads, lifts and other incidentals Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixig glazing with glass panes of 4mm (four milimertres) thickness of modi guard / Sant gobain (weight not less than 10.00 kg/sqm (ten decimal zero kilograme per square metres) glazing in aluminium door, windows, ventilators\ shutter and partition etcetra; with PVC/Neoprens gasket etcetra; complete including carriage of material within all leads, lifts of materials and other incidentals. as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing 40x5mm (forty into five millimeter) flat iron hold fast 40cm (forty centimeter) long including fixing to frame with 10mm (ten millimeter) diameter bolts and nuts and wooden plugs and embeding in cement concrete block 30x10x15cm (thirty into ten into fifteen centimeter) 1:3:6 (one cement isto three sand isto six graded stone aggregate 20mm (twenty millimeter) nominal size complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax,GST and any taxes imposed by the Government.

Providing and fixing the complete box of Cup board shall be made of 25mm (Twenty Five millimetre) thick water proof termite resistant plyof Uniply / Green ply/ Century ply / Kitply / Dura ply / Marino ISI marked including shelves.Back side of board shall have 6 to 8 mm (Six to eight millimetre) thick water proof ply all the cut portion of board shall have 6 mm (Six millimetre) thick hard wood edging. The shutter from all side shall be finished with 1mm (one milimetre)thick lamination ISI Marked of approved shade of Century / Greenlam /Action Tesa and 19 mm (Nineteen millimetre) thick water proof ply board of uniply / Greenply for shelves including hinges, handle,knob megnatic catcher complete the outer face of cupboard shall be measured and paid for as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Chargeincluding carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax,GST and any taxes imposed by the Government.

Providing and fixing factory made PVC door frame single rebate of any clours of size 50x47mm (fifty into forty seven milimetres) with a wall thickness of 5mm (five milimetres)made out of extruded 5mm (five milimetres) rigid PVC foam sheet heat bend & mitred at corners and jointed with 2 Nos. of 150mm (one hundred fifty milimetres)long brackets of 15mmx15mm (fifteen in to fifteen milimetres) M.S. square tube, the vertical door profiles to be reinforced with 19mmx19mm (nineteen in to nineteen milimetres)M.S. square tube of 19 (nineteen) gauge EPDM rubber gasket weather seal to be provided throughout the frame i/c fixing of door frame to wall with M.S. screws 100 (hundred milimetres)long with wooden or rawl plugs emedded in masonry complete as per approved shade within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government..

Providing and fixing 65x35mm (Sixty five into Thirty five millimetres) special quality bright finished brass cup-board locks or ward robe locks with six levers including necessary screws etcetra complete as per approved shade within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government..

Providing and fixing 20 mm (twenty millimetres) dia stainless steel curtain rod having wall thickness of 1.25mm (one point two five milimetres)with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etcetra wherever necessary complete as per approved shade including carriage of material within all leads, lifts of materials and other incidentals as per approved specification, drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 300x16mm (three hundred into sixteen millimeters) ISI marked oxidised M.S. door aluminioum sliding door bolt I.S.I. marked anodi zed(anodic coating not less than grade AC-10as per IS 1868) transport or dyed to required colour or shade with nuts and screws latches conforming to IS:5930 with screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST and any taxes imposed by the Government.

Providing and fixing 200X10mm (two hundred into ten millimeters) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST and any taxes imposed by the Government.

Providing and fixing 150X10mm (one hundred fifty into ten millimeters) ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, Toll tax, GST and any taxes imposed by the Government.

Providing and fixing 125mm (one hundred twenty five millimeters)fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 150mm (one hundred fifty millimeters) M.S.hooks and eyes complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST or any other taxes imposed by the Government. :

Providing and fixing aluminium die cast extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body with double speed adjustment with necessary accessories and screws etcetra complete complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government..

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised(anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government..

Providing and fixing 25mm(twenty five millimeters) thickKota stone mirror polised slab flooring 55X55cm with Jaishmer band 7.5cm wide (seven point five centimilimetres) of uniform colour jaiselmer yellow marble band in flooring as per detail over 20 mm (twenty milimetres)(average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including curing rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying (600x 600mm) (six hundred into six hundred milimetres) Full body Matt finished vetrified tiles of Restile/Nitco /Rak/Kajaria / Orient -Bell/AGL/Simpolo /Johnson/Somany of approved shade and design of the office in flooring(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate of three point three kilograme per square metre) including grouting the joints with white cement and matching pigments etc, complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying (600x 600mm ) (six hundred into six hundred milimetres) Full body Matt finished vetrified tiles of Restile/Nitco /Rak/Kajaria / Orient -Bell/AGL/Simpolo /Johnson/Somany of approved shade and design in dado skirting as per approved shade and design of the office (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty milimetres)thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate of three point three kilograme per square metre) including grouting the joints with white cement and matching pigments etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying (600x 600mm) (six hundred into six hundred milimetres) Double Charge/ Ultra charge vetrified tiles in flooring / skiring of Restile/ Nitco/Kajaria / AGL / Simpolo / Somany / Johnson / Agl/Somany as per approved shade and design of the office (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty milimetres)thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (at the rate of three point three kilograme per square metre) including grouting the joints with white cement and matching pigments etcetra complete sqm including grouting the joints with white cement and matching pigments etcetra complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing 30 x 30cm and 25mm (thirty into thirty into twenty fivemilimetres) thick automatic hydraulic compressed and polished Precast terrazzo tiles of ISI marked No.1237 in 50% white cement and 50% gray cementin white / Green and maroon chips 0,,B and 2B of NTC / unistone / Atlantic with marble chips of specified sizes, laid in floors, treads of steps, ramp , landings and skirting on a bed of 25mm (twenty five milimetres) thickness of cement mortar 1:6 (1 cement : 6 Sand) jointed with cement slurry mixed and pigment to match the shade of tiles (Wherever required) including rubbing and polishing Complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying 300x300 mm (three hundred into three hundred millimetre) Antiskid Cermic Tiles of Premimum quality of Nitco/ Kajaria/ Johnson /AGL / Somany/ Orient Bell in/ Simpolo / Rak flooring laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights as per approved specifications, drawing and design and entire including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in- Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying Ceramic Glazed floor tiles of Kajaria /Johnson / Nitco /Orient /Bell / Somany / AGL /Simpolo with one border matching contrast at top size 300x450 mm (three hundred into four hundred fifty milimetres)or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty milimetres) thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm at the rate of three point three kilograme per square metre) including grouting the joints with white cement and matching pigments etc., complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Kota stone slab 25 mm (twenty five milimetres)thick in Single piece slab with round noising for treads and riser of stairs approved shade 20mm (Twenty millimetre) average thick base of cement mortar 1:4 (One cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing as per approved specification, drawing and design and entire including carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 19 mm (nineteen milimetrea) thick polished Grey / china pink Granite having semi round nosing gang saw cut, mirror polished, premoulded and prepolished, machine cut for work top of labs of required size of approved shade, colour and texture laid over 20 mm(twenty milimeres) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetra complete as per specification, drawing, design and direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and laying 300x300x25mm (Three hundred into three hundred into twenty five millimetre) labrador design(Rainbow series) of NTC/ unistone / Atlantic slab flooring 40mm (forty millimetre) average thick on 20mm (twenty millimetre) average thick fixed on floor, Ramp cement Mortar 1:3 (One cement isto three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rbbing and polishing, cutting and moulding complete in all respect as per specification drawing, design and direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidentals. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing staircase railing having hand rail of 50 mm (fifty milimeteres)dia SST stainless steel pipe handrail fixed with 35mm (thirty five milimetres) diametre stain less steel pipe as per detail in combination of 35XZ35mm (thirty into thirty five milimetres) stain less steel square pipe and 15/20 stain less steel and baluster stair case complete in all respect as per specification, drawing, design and direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing handrail 50mm (fifty milimetres)dia Stainless steel (SST) hollow pipe handrail slip resistant with round ends at two level at 75cm and 90cm height welded to 25mm diametre stain less steel hollow pipe balusters. It should extend 30cm beyond the top and bottom of the ramp as per detail of approved drawing , design specificationand direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing pre-painted steel sheet ridge (factory made) having proper Gola shape or hips of TATA Durashine / Reliance / Jindal Steel corrugation of steel sheet 60cm (sixty centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regulat modified polyster organic coating of 20 (twenty) microns over 5 (Five) microns primer coating + back coating of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia prepainted bitumen washers etc. complete in all respect as per approved specifications, drawing and design and direction by the Engineer in charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Providing and fixing prepainted valleys 90cm (Ninty centimeters) overall with 0.60mm (Zero point six zero millimeter) thick prepainted steel sheet ISI marked Z-120 (Z-one hundred twenty) prepainted steel sheet of TATAdurashine/ sail/ Relience/Jindal pre painted steel sheet in roofing (kolermetal or equivalent make) with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating+back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm (six millimeter) diametre with prepainted G.I limpet and bitumen washer complete with all accessories as required as per direction of Engineer-In-charge and as per HPPWD specifications, including carriage of materials within all leads, lifts, and other incidental. The rate including Octroi, Toll Tax Sales tax and any other taxes imposed by the Government.

Providing and fixing 0.60mm (zero point sixty millimeter) thick prepainted steel sheet ISI marked Z-120 (Z-one hundred twenty) of TATA/durashine/ sail/ Relience/Jindal or equivalant in roofing over steel trusses with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (TWENTY) microns over 5 (five) microns primer coating to back coat of polyster and 5 (five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm ( six milimeter) diameter with prepainted limpet and rubber washer complete with all accessories as required as per direction of Engineer-In-charge including carriage of material with in all lead and lift and other incidental as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate inclusive of Octroi, Toll tax, GST and any taxes imposed by the Government.

Providing and fixing TATA/durashine/ sail/ Relience/Jindal 30cm (Thirty centimetre) wide 25cm (Twenty five centimetre) deep plain G.I. sheet gutter of 0.60mm (zero decimal six zero millimetre) thick sheet fixed with iron brackets 40X3mmsize bolts, nuts and washers etcetra having dome shape gratting including making necessary connections with rain water pipe complete including cost and carriage of material with in all leads, lifts and other incidentals as per specifications, approved drawing and design, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing M.S.mild steel B.P. sheet 2.0mm thick of TATA/durashine/ sail/ Relience/Jindal for eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-Incharge (Base members of steel work shall be measured and paid separately) including fixing complete as per cost and carriage of material with in all leads, lifts and other incidentals as per PWDspecifications, approved drawing and design, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing flashing 38 cm overall with 0.60 mm thick of Sail /Tata Durashine / Reliance / Jindal Steel prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete as per cost and carriage of material with in all leads, lifts and other incidentals as per PWDspecifications, approved drawing and design, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 150 mm (One hundred fifty millimetre) diametre high pressure P.V.C rain water pipes of Supreme/Finolex/Vectus /Relpipe (reliance) working pressure not less than 6.0 kg/cm2 (Six decimal zero kilogram per square centimetre) I.S.I Marked including fixing with approved adhesive etcetra complete including carriage of material within all leads, lifts and other incidentals. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing on wall face 150 mm (One hundred fifty millimetre) diametre P.V.C.plain bend Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes of Supreme/Finolex/Prince /Relpipe (reliance)/ vectus including filling the joints with approved adhesive complete as per PWD specification, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- in-Charge Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing on wall face 150 mm (One hundred tenfifty millimetre) diametre P.V.C.shoe Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes of Supreme/Finolex/Prince /Relpipe (reliance) vectus including filling the joints with approved adhesive complete as per PWD specification, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- in-Charge Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing unplasticised PVC Pipe clips / Clamps of Supreme/Finolex/ Prince/Relpipe (reliance)vectus of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etcetra complete including carriage of material within all leads, lifts and other incidentals. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Structural steel work of Tata/tiscon/Sail riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per specification, drawing, design and direction by the Engineer in charge. including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Octroi, Toll tax, GST and any other taxes imposed by the Government.

Painting Steel work with Deluxe multi surface paint of Asian/Nerolac Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying painting coat with ready mixed primer of Asian/Nerolac approved shade and manufacture on wood work (hard and soft wood) complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting woodwork with premium enamel of Asian/Nerolac Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Plaster to ceiling in cement mortar 6 mm (six milimetres) thick cement mortar 1:3 (1 Cement : 3 fine sand). complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (fifteen millimeter) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and rounded angles in all girth and finished even and smooth as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (fifteen millimeters) thick cement plaster with cement mortar 1:4 (one cement isto four sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth for septic tank complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

18 mm (Eighteen milimetre)thick plain cement mortar Raised band in cement mortar 1:4 (one cement : four fine sand): as per approved drawing, design, pecifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (fifteen millimeters) thick cement plaster with cement mortar 1:6 (one cement isto six sand) in single coat on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

20mm (Twenty millimeter) thick cement plaster with cement mortar 1:4 (one cement isto five sand) in in two coats on fair side of brick/concrete/ stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge. including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 1200x1800 mm (Twelve hundred into eighteen hundred millimetre) Green chalk board/Black board of Landmark / Promark shall be made of steel of thikness 0.3 to 0.4 mm. (zero decimal three to zero decimal four millimetre) It shall have vitreous Enmal coating of 0.095 mm (zero decimal zero nine five millimetre) minimum thickness on top and 0.3 mm (zero decimal three) on the back. top shall be free from waviness and shall show excellient ability. The core material shall be 9mm (Nine millimetre) thick MDF board heaving bulk density of 750kg/cum (Seven hundred fifty kilogram per cubic metre) and grade-1 as per IS : 212406-203 edition 2.2 the backing material sheet shall be min. 0.25mm (zero decimal two five millimetre) thick electro galvanised steel sheet conforming to is: 277-2003. The board shall be fixed on the wall with specially designed J clamps and Square clamps with help of Nylon sleves and screws as per site requirement complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge. including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and applying white cement (Birla white/JK) /based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing water proofing treatment shall be done in two coats apply First coat of Dr. Fixit Torch SHIELD ( P - 3160- 3mm ) to the clean and saturated surface maintaining a coverage 0.60 sqm (Zero decimal six zero squate meter) per kilogram to achieve 1mm (one millimeter) thickness this coating shall also be executed up to 300mm vertically. The 2nd coat shall be applied in opposite direction after 4 to 6 (Four to six) hours of application of 1st coat then sprinkle sand on top surface of applied Dr. Fixit Fast flex white still tacky and the second coat. Then apply cement mortar 1:4 (one cement ist four sand) and mixed with Pidiproof LW at the rate 200ml (two hundred millimetre) per 50 (Fifty kilogram) of cement over the floor with suitable gradient towords drain water pipe while the second coat of Dr. Fixit is still tacky.complete as per approved drawing, design including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate is including Royality, Malkana, Octroi, Toll Tax, Sales tax, GST and any other taxes imposed by the Government.

Finishing walls with Apex weather proof exterior emulsion paint of Asian / Dulux / Berger / Nerolac Suraksha paints of approved shade having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete as per Architectural drawing ,design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats withwith Premium Enamel paintof Asian / Dulux / Berger / Nerolac Suraksha paints based water thinnable sealer of approved brand and manufacture for interior shade on undecrated concrete/ stone/ plaster of wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats with acrylic washable Distemper of Asian / Dulux / Berger / Nerolac Suraksha paints based water thinnable sealer of approved brand and manufacture for interior shade on undecrated concrete/ stone/ plaster of wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying two or more coats of Interior emulsion of Asian paints / Berger paints/ Dulux paints/Nerolac paints (above Dado/skirting) of approved shade for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic,/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete as per Architectural drawing ,design and specifications of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats with Premium emulsion of Asian / Dulux / Berger / Nerolac Suraksha paints based water thinnable sealer of approved brand and manufacture for interior shade on undecrated concrete/ stone/ plaster of wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing acoustical panels of 600x1200x16 mm( six hundred into twelve hundred intosixteen millimeters) Duro RH 19 Tile of Armstrong and fixed with the power coated G.I.frame work @ 600mm centre to centre in combination with 150X12mm (one hundred fifty into twelve millimetres) thick Rai woodbarder as per pattern and detail fixed with steel screw as per detail drawing and specification as per direction of Engineer-In -Charge .The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and fixing 595 X 595 X6 mm (five hundred ninty five into five hundred ninty five into six millimetre) designer board of Everest (E-board) ceiling with pre-panled G.I. Channel framing @ 600mm (six hundred millimetres) centre to centre including of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing plinth protection with 40mm (forty millimetre) thick interlocking paver block of NTC / Atlantic with 23cm(twenty three centimetre) dia half round reinforcement cement concrete pipe for drainage purpose fixed over 10cm(ten centimetre) thick cement concrete 1:4:8((one cement : 4sand :8 gradedstone) in bedding/ haunching for pipe complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 12mm (twelve millimetre) thick Unistone / NTC / Atlantic tile cladding on wall surface with 12mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) and jointed with cement slurry to match the stone including scaffolding and cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- In-Charge .Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

20 mm cement Groove in Plaster @ 23 cm centre to centre With cement Mortar :1:4 (1 cement: 4 coarse sand) and finished even and smooth complete as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 60mm( sixty milimetre) thick faciory made cement concrete interlocking paver block of NTC/Atlantic of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm (fifty milimetre) thick compacted bed of coarse sand, filling the joints with line sand etcetra all complete as per specification, drawing, design and direction by the Engineer in charge. as per the direction of Engineer-in-charge .The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates 3.15mm.(three decimal one five milimetre)thick welded with angle iron in frame 30x30x5mm (thirty into thirty into five milimetre). So as to give a fair finish including centring, shuutering, strutting and propping etcetra with wooden battens and ballies, height of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete & plain concrete work in:Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying in position machine batched and machine mixed design mix M-25 (twenty five) grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, Cement content considered in this item is @360 kg/cum. All works above plinth level to five level including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 455x610mm (four hundred fifty five into six hundred ten milimetres)light duty rectangular man hole with frame cover weight 38kg (Thirty eight kilograme)single seat i/c entire carraige of material l complete as per specification, drawing, design and direction by the Engineer in charge. as per the direction of Engineer-in-charge .The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Constructing brick masonry chamber for underground C.I. cast iron inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cast iron cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten milimetres) internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Inside dimensions 455x610 mm and 45 cm deep for single pipe line : 19.30.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 as per direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Excavation in drains and channels etcetra in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturated soil including chiseleing or any other mixed variety of soil, lift upto any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layer when required into plinths sides of foundations etc. Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer- Incharge, within all leads, lifts of materials and other incidentals. As per approved drawing, design and as directed by the Engineer-in-Charge. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size in PVC pipes of the 110 mm internal diameters i/c concretye for bedding As per approved drawing, design and as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 110 mm (One hundred ten millimetre) diametre high pressure P.V.C rain water pipes of Supreme/Finolex/Vectus /Relpipe (reliance) working pressure not less than 6.0 kg/cm2 (Six decimal zero kilogram per square centimetre) I.S.I Marked including fixing with approved adhesive etcetra complete including carriage of material within all leads, lifts and other incidentals. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing in position for water pump 1.00 HP (one horse power) capacity of kirloskar make I.S.I. mark including all necessary fitings required at site complete in all respect within all leads, lifts of materials and other incidentals, as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and laying in trenches, galvanised mild steel tubes 15mm (fifteen millimetre) diaincluding fiftings as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 1620 (20mm OD pipe) Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetra with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge.including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 2025 (25mm OD pipe) Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450 ,2004 of Kitec U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etcetra with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge.including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of Octroi, Royality, Malkhana, Toll tax, Sale tax, GST and any other taxes imposed by the Government.

Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40nmm (Twenty milimetres to Forty milimetres)nominal bore by providing and fixing tees including cutting and threading the pipe complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetres) diametres high pressure PVC spigot and socket, waste and ventilating pipes light grade ISI marked of fenolex/vectus/price 4.6mm thick having pressure not less than 6kg /cm2 (six kilogramm per centimetre square) including fixing with approved adhesive etcetra complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five milimetres) diametres high pressure PVC spigot and socket, waste and ventilating pipes light gradeISI marked of Finolex , Relpipe (Reliance ) , Vectus price 4.6mm thick having pressure not less than 6kg /cm2 (six kilogramm per centimetre square) including fixing with approved adhesive etcetra complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetres) diametres cast iron P.V.C. holder bat clamps ISI marked of Finolex , Relpipe (Reliance ) , Vectus of approved drawing including steel screw and rawl plug etcetrta including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five milimetres) diametres cast iron P.V.C. holder bat clamps ISI marked of Finolex , Relpipe (Reliance ) , Vectus of approved drawing i/c/ steel screw and rawl plug etcetra including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetres) diametres P.V.C. I.S.I. marked heal rest of Finolex / Vectus / Reliance including filling the joints with including fixing with approved adhesive within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five milimetres) diametres P.V.C. I.S.I. marked heal rest of Finolex / Vectus / Reliance including filling the joints with including fixing with approved adhesive within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetres) diametres P.V.C Plain bend of Supreme/Finolex/Reliance including fixing with approved adhesive complete including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five milimetres) diametres P.V.C Plain bend of Supreme/Finolex/Reliance including fixing with approved adhesive complete including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetres) diametres P.V.C.Collar of Supreme/Finolex/Reliance including fixing with approved adhesive complete including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five milimetres) diametres P.V.C .Collar of Supreme/Finolex/Reliance including fixing with approved adhesive complete including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten milimetres) diametres P.V.C.Cowl of Supreme/Finolex/Reliance including fixing with approved adhesive complete including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 75mm (Seventy five milimetres) diametres P.V.C .Cowl of Supreme/Finolex/Reliance including fixing with approved adhesive complete including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110 x 90mm (One hundred ten into Ninety milimetres) P.V.C. I.S.I. marked floor trap of Finolex / Vectus / Relpipe(Reliance) ISI marked (confirming to BIS-14735-99) of self cleaning design including with approved adhesive cost of cutting and making good walls and floors complete including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110 x 75mm (One hundred ten into seventy five milimetres) P.V.C. I.S.I. marked floor trap of Finolex / Vectus / Relpipe(Reliance) ISI marked (confirming to BIS-14735-99) of self cleaning design including with approved adhesive cost of cutting and making good walls and floors complete including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing water closet squatting pan (Indian type W.C. pan )White Vitreous china Orissa pattern W.C. pan no 20090 of size 530x410 mm (five hundred thirty into four hundred ten milimetres)with integral type foot rests with 100 mm PVC P or S trap, 10 litre low level P.V.C. flushing cistern,of Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type)No 20087 (S - 10 ) Size 57 X 35 X 39 cm (fifty seven into thirty five into thirty nine centimetres)with seat and lid, 10 litre low level white vitreous PVC flushing cistern (sleek Plus) and fixed with Jet pressure of Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required complete, including cutting and making good the walls and floors wherever required including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type Matrix water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required complete, including cutting and making good the walls and floors wherever required including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing G.I. inlet connection pipe for each flush pipe with W.C. pan complete, including cutting and making good the walls and floors wherever required including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing vitreious china three half staff urinal larget flat back No. 60002of size 39X37.5X59 cm (thirty nine into thirty sevenpoint five into fifty nine centi milimetres) with 10 ltr. PVC automatic flushing cisten of Hindware / Cera / Jaquar of star white / Snow white shade and as shown in the drawing / as per details with fittings standred size C.P. brass flush pipe,spreaders with union and clamps (all in co brass) with waste fitting as per IS : 2556,C.I. trap with outlet grating and other coupling in cp brass including painting of fitting and cutting and including good the wall floors wherever required including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing wash basin White Vitreous China Flat back wash basin Garnet no 10080 size 580x 430 mm( five hundred eighty into four hundred thirty milimetres) ( Under counter Basin ) Hindware , Cera ,Jaquar of star white / Snow white shade and as shown in the drawing / as per details with single 15 mm C.P. brass pillar tap with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing vitreous China wash basin with CPbrecket of Matrix with pedestal of Hindware / Cera /Jaquar of star white / Snow white shade and as shown in the drawing / as per details with single 15 mm C.P. brass pillar tap with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require or direction by Engineer in charge including of carriage of materials within all leads, lifts and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing white vitreous china large flat back two half stall urinal no 60002 of size 39 x 37.5 x 59 cm (thirty nine into thirty seven point five into fifty nine )with 5liter capacity white PVC automatic flushing cistern of Hindware / Cera/Jaquar of star white / Snow white shade and as shown in the drawing / as per details with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required or direction by Engineer in charge including of carriage of materialswithin all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing vitreous China pedestal for wash basin Delta No. 10010 of size 55x40mm (Fifty five is to forty milimetres) without pedestal of Hindware / Cera /Jaquar of star white / Snow white shade and as shown in the drawing / as per details with single 15 mm C.P. brass pillar tap with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require or direction by Engineer in charge including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink of Diamond / Unik Kitchen sink with drain board 510x1040 mm (five hundred ten into one thousand forty milimetres) bowl depth 250 mm with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required or direction by Engineer in charge including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 32mm nominal size diameters rubber plug for wash basin (Heavy duty makes ISI marked is No. 8931 7893) or direction by Engineer in charge including of carriage of materialswithin all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing PVC connection pipe ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore with brass unions completeor direction by Engineer in charge including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing Mixer for kitchen sink with casted swinging spout at top complete or direction by Engineer in charge including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 32 mm dia C.P. Brass waste of Continental series of Jaquar / Contess series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal for wash basin and sink complete (New work) or direction by Engineer in charge including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetres) diametres C.P. Grating of Continental series of Jaquar / classic series of Hindware /floral series of Cera / Vintage series of Kerovite & Hindon series of Jal for gully floor or Nahni trap complete or direction by Engineer in charge including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying 150mm nominal bore/diameters.(to level or slopes) PVC pipes grade 'A' and jointing with approved adhesive ncluding testing of pipes and joints complete as direction by Engineer in charge including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 600x450 mm (six hundred into four hundred fifty milimetres) beveled edge mirror of Continental series of Jaquar / classic series of Hindware /floral series of Cera / Vintage series of Kerovite & Hindon series of Jal of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete or direction by Engineer in charge including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass towel rail 600X20 mm (six hundred into twenty milimetres)of Continental series of Jaquar /classic series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour complete or direction by Engineer in charge including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing liquid soap container with C.P. Brass lid and brackets fixed to wooden plugs with C.P. Brass screws :-Plastic container complete or direction by Engineer in charge including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass each toilet paper holder of Continental series of Jaquar / Contess series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal complete or direction by Engineer in charge including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 8mm dia CP Jet spray make of continental series of Hindware /floral series of Cera/ Jaquar of series of kerovit 4 lever series of Jal with 1.5 mtr (one point five metre) tube with SS trangular plate of European type W.C. of quality complete or direction by Engineer in charge including of carriage of materials within all leads, lifts of materials and other incidentals. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen milimetres) nominal bore C.P. brass bib cock tap of continantal series of Jajuar/Contess series of Hindware/ Ocean series of Cera/ Vintage series of Kerovit and Hindon series of Jal complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government..

Providing and fixing 15 mm (fifteen milimetre) nominal bore C.P. brass stop cock (concealed) Continental series of Jaquar / classik series of Hindware /floral series of Cera / Vintage series of Kerovite & Hindon series of Jal of standard design and of approved make conforming to IS:8931 complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen milimetre)nominal bore C.P. brass pillar tab cock (concealed) of Continental series of Jaquar / Classic series of Hindware /Ocean series of Cera / Vintage series of Kerovite & Hindon series of Jal of standard design and of approved make conforming to S:8931complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing C.P. Push cock tap of Continental series of Jaquar / classik series of Hindware /floral series of Cera / Vintage series of Kerovite & Hindon series of Jal of standard design and of approved make conforming to S:8931complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15 mm (fifteen milimetre)nominal bore C.P. brass angle valve of Continental series of Jaquar /classik series of Hindware /floralseries of Cera / Vintage series of Kerovite & Hindon series of Jal for basin mixer and geyser points of approved quality conforming to 8931complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government

Providing and fixing 15mm (Fifteen millimeters) nominal bore C.P.brass full way valve with wheel complete Continental series of Jaquar / classik series of Hindware /floral series of Cera / Vintage series of Kerovite & Hindon series of Jal of standard design and of approved make conforming to S:8931complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (fifteen milimetre)nominal bore C.P. brass valve (Horizontal plunger) type High pressure with polythene plastic floats of Continental series of Jaquar / Classik series of Hindware / Floral Series of Cera / Hindon series of Jal of standard design and of approved make conforming to S:8931complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing PVC connection pipe with brass unions ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore complete.within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 32 mm dia P.V.C.flexible waste pipe 0f Finolex , Relpipe (Reliance ) , Vectus for sink or wash basin including P.V.C. waste fittings complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110 mm (one hundred ten millimetre)P.V.C single equal branch with oval access door of Finolex / Relpipe (reliance) / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 75 mm (seventy five millimetre)P.V.C single equal branch with oval access door of Finolex / Relpipe (reliance) / Vectusinsertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110 mm (one hundred ten millimetre)P.V.C double equal branch with oval access door of Finolex / Relpipe (reliance) / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive. within all leads, lifts including carriageof materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 75 mm (seventy five millimetre)P.V.C double equal branch with oval access door of Finolex / Relpipe (reliance) / Vectus insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive within all leads, lifts including carriageof materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110 mm (one hundred ten millimetre) PVC door bend with oval access door of Finolex / Relpipe (reliance) / Vectus insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetra complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 75 mm (seventy five millimetre) PVC door bend with oval access door of Finolex / Relpipe (reliance) / Vectus insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etcetra complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 110 mm (one hundred ten millimetre) PVC offset 45° ISI marked of Finolex / Relpipe (reliance) / Vectus including fixing with approved adhesive etc. complete. complete including fixing with approved adhesive etcetra complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 75 mm (seventy five millimetre) PVC offset 45° ISI marked of Finolex / Relpipe (reliance) / Vectus including fixing with approved adhesive etcetra complete. complete including fixing with approved adhesive etc. complete within all leads,including carriage lifts of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and placing 1000 liter (one thousand liter) capacity on terrace (at all floor levels) polyethylene water storage tank of three layersSupreme ,Finolex, Vectus IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.all leads, lifts of including carriage materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimetre) nominal size) bedding for P.V.C sewer pipes of internal diameter 150mm (One hundred fifty millimetre) including necessary form work and curing complete.within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:3:6(1 Cement : 3 Sand : 6 graded stone aggregate 40mm nominal size ) in haunching of PVC. pipes of 150mm (one hundred fifty milimetre)internal diameters, including concrete for beddings necessary form work and curing complete.within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 600x120x5 mm ( six hunderd into one hundred twenty in to five milimetres)glass shelf Continental series of Jaquar /classik series of Hindware /floral series of Cera / Vintage series of Kerovite & Hindon series of Jal with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etcetra complete.within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm (twenty milimetres)nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm (ninty into eighty centimilimetres)and 45 cm (forty five centimetres)deep including C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten milimetres)internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With Sewer bricks conforming to IS : 4885 each 9650.15 within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With Sewer bricks conforming to IS : 4885 within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etcetra complete as per standard design Inside dimensions 455x610 mm and 45 cm deep for single pipe line : 19.30.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 600mmx300mm (six hundred in to three hundred milimetres) vitreous china division plate for urinals of Hindware /cera/Jaquar of star white / snow white shade complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying 20 mm (twenty milimetres)nominal bore in trenches, galvanised mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately) complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and fixing 40mm (forty milimetres) dia chromium plated grab bar as per detailsat the position of the seat and wash basin complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Providing and laying 20 mm (twenty milimetres) nominal bore to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor complete within all leads, lifts including carriage of materials and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive, toll taxes, GST and any other taxes imposed by the Government.

Naresh Padiyal

Harbhajan singh