Loading
Loading…
Loading…
Tender Value
₹1.7 L
EMD Value
₹2,121
Closing Date
14 Sept 2026, 11:00 am2d left
GENERAL MANAGER EXCAVATION KUSUNDA AREA
OFFICE OF THE GM KUSUNDA AREA VI
Complete wiring, harness of BEML Dumper 60780 at DOCP Kusunda Area
2026_BCCL_364853_1
BCCL/KA-VI/EXC/E-TEN/26-27/63
Open Tender
Excavation Department Work
Item Rate
7 days
DOCP KUSAUNDA AREA VI
Please refer Tender documents.
8 documents required · 8 mandatory
₹2,121
Yes
3 Sept 2026
3 Sept 2026
15 Sept 2026
3 Sept 2026
14 Sept 2026
3 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Item Description/ Heading | |||||
| 1.01 | Jobs to be done:
DESCRIPTION OF WORK
Repairing/Reconditioning of Electrical Wiring Harness of Dumper
1. Complete inspection, repairing and reconditioning of the electrical wiring harness of the dumper.
2. Dismantling, checking and replacement/fixing of all defective LT wires as required.
3. Replacement and fixing of battery relay, including proper connection and testing.
4. Replacement and fixing of battery terminal sockets and heavy-duty copper lugs, including proper crimping and insulation.
5. Supply and fitting of adhesive tape, non-adhesive insulation tape, wire clips and flexible electrical wire cover/PVC pipe for proper routing and protection of wiring.
6. Supply, replacement and fixing of circuit breaker, wiring clips and 4-way switch/relay, as required.
7. Proper routing, dressing, clamping and securing of all electrical wires to avoid damage due to vibration, heat, abrasion and movement.
8. Checking and rectification of all electrical connections, terminals and joints for proper continuity and insulation.
9. Complete testing of the electrical circuit after repairing and replacement of components.
Material Required:-
LT wire (10mm/6mm/5mm/2.5mm/1.5mm), PVC wire 2.5mm, Flexible electric wire cover PVC pice 2.5mm, Battery relay 24V, Battery cut off power kill switch 200A 24V, relay 24V, Batery cable heavy duy, Terminal socket, Copper luge, Wire clip, 4st switch 24V.
General Scope of Work
The repairing work shall be completed with all required materials, consumables, tools, tackles and skilled manpower/labour. All wiring shall be properly connected, insulated, routed and secured. After completion, the complete electrical system shall be tested under operating conditions to ensure proper functioning and reliability of the dumper electrical system.
The quoted rate shall be inclusive of material, labour, transportation, tools & tackles and all other incidental charges required for satisfactory completion of the work. | 1 | Nos | 1,69,640 | ₹1,69,640 |
| 7 | Total impact of GST for the purpose of CTC | 1 | Nos | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.30 MB
BOQ_377771.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .