Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.3 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹39.1 L+₹2.5 L (6.73%)Rejected-Finance PLOT NO P PARASNAGAR NR SBI BANK NARSANG TEKRI PORBANDAR 360 575 | PORBANDAR | GUJARAT | 360575 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹40.2 L+₹3.6 L (9.79%)Rejected-Finance PLOT NO 626 627 GIDC BEHIND GANGOTRI DIARY PORBANDAR 360 577 | PORBANDAR | GUJARAT | 360577 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹40.4 L+₹3.8 L (10.3%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹41.4 L+₹4.8 L (13.1%)Rejected-Finance JAVERI BUNGALOW AREA KAVERI HOTEL LINE NH PORBANDAR 360 575 | PORBANDAR | GUJARAT | 360575 | L5 | Rejected-Finance Other than lowest |
Tender Value
Refer Docs
EMD Value
₹76,000
Closing Date
18 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Manish Kumar, IDSE, Garrison Engineer
GE Navy Porbandar Tija Mile Porbandar
PROVISION OF 02 IN NO STORAGE ACCOMMODATION FOR LOGISTIC COMPLEX AT NAVAL BASE UNDER GE NAVY PORBANDAR
2023_MES_620721_1
9219/PBR/E8
Open Tender
Civil Works
Item Rate
180 days
Porbandar
Please refer Tender Documents
7 documents required · 7 mandatory
₹500
Yes
Garrison Engineer Navy
₹76,000
Yes
31 Aug 2024
26 Sept 2023
20 Oct 2023
26 Sept 2023
18 Oct 2023
11 Oct 2023
27 Sept 2023 - 10 Oct 2023
Amount
Surface dressing n.exc. 15 cm deep in hard/dense soil including cutting of bushes, sapling etc. complete.
Excavation in trenches n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundation, etc. and getting out in hard/dense soil, complete all as direced by Engr-in-Charge.
Excavation in trenches n.exc. 1.5m wide and n.exc. 1.5m in depth; for foundation, etc. and getting out in soft/disintegrated rocks, complete all as direced by Engr-in-Charge.
M&L for PCC type D2, 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete plinth beam .complete all as directed by Engr-in-Charge.
M&L Treating the AntiTermite Treatment for bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area
M&L Treating the AntiTermite Treatment for flooring at the rate of 7.5 litres of emulsion per square metre of surface area
M&L Treating the AntiTermite Treatment for soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area
M&L 75 mm thick PCC, type C-2, 1:3:6 (20mm graded aggregate) as in plinth protection, surface finished even and smooth without using extra cement complete all as directed.
M&L for RCC type M-30 (20 mm graded aggregate) as in foundations, plinth beams, bases for column etc. complete all as directed by Engr-in-Charge.
M&L for RCC type M-30 (20 mm graded aggregate) as in column etc. complete all as directed by Engr-in-Charge.
M&L for RCC type M-30 (20 mm graded aggregate) as in lintel beams, roof beams, cantilevers etc. complete all as directed by Engr-in-Charge.
M&L for RCC type M-30 (20 mm graded aggregate) as in chajjas etc. complete all as directed by Engr-in-Charge.
M&L for RCC type M-30 (20 mm graded aggregate) as in slab supported on walls, beams and columns in roofs etc. complete all as directed by Engr-in-Charge.
Returing, filling in, including spreading, levelling, watering and well reamming in layers not exc 25 cm complete all as directed by Engr-in-Charge.
Removing excavated material as not exc 50m and depositing where directed .
M&L for form work to sides of concrete foundations, footings, bases of columns and plinth beams and similar work, complete all as directed by Engr-in-Charge.
M&L for form work to sides of columns, square, rectangular, complete all as directed by Engr-in-Charge.
M&L for formwork to chajjas,troughs and similar items including edgeson flat and finished surface.
M&L for form work to sides and soffits fo roof beams, lintel beams etc. including supports, overhangs, etc. also splays between floors and beams, etc. complete all as directed by Engr-in-Charge.
Formwork to soffit of suspended slabs such as roof slabs floor slabs, landings and similar works not exc 200 mm thick (Horizontal or sloping).complete all as directed by Engg-in charge.
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as directed by Engr-in-charge.
S&F Mild steel TMT bars 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as directed by Engr-in-charge.
M&L for stone walling porbandar type block masonary in cm 1:6, brought up to courses, complete all as directed by Engr-in-Charge.
M&L for 20 mm thick External Plaster in CM 1:4 mixed with water proofing compound, finished even and smooth (without using extra cement).
M&L for 15 mm thick Internal plastering in CM 1:6 finished even & smooth without using extra cement and applying sagol finish complete.
M&L for Internal Plastering 5 mm thk to Ceiling in CM 1:3 complete
Supply only water proofing compound.
M&L for 10 mm thick (average) plastering on concrete surfaces in cement mortar 1:4, in order to maintain proper slope and base over existing roof surfaces for laying of APP based polymeric membrane, add WPC @3% of cement weight(WPC paid separately), finished even and smooth without using extra cement complete all as specified and as directed. (Note:- Polymeric membrane will be measured and paid separately)
M&L for water proofing treatment to RCC roof slab including parapet comprising with the following course of treatment/ specification from bottom to top:- (a) Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces. (b) one layer of APP based polymeric membrane of approved manufacturer, 4 mm thick, weight not less than 3.6 Kgs per Sqm, reinforced with non wovwn polyster fabric or weight not less 160 gms per sqm. (Note:- (i) Laying of APP based membrane shall be done by torch on method or as per manufacturers instruction. (ii) A minimum overlap of 150 mm and 100 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instruction. (c ) Applying two coats of reflective Bituminous aluminium paint on top of APP membrane.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete as specified and directed.
M & L preparing surface of newly plastered walls and applying two coats of oil bond distemper over chalk whitening preparatory to distempering.
M & L for preparation of newly plastered surfaces of Ceiling and applying three coats of white wash
M&L for Hard core, using broken stone or boulders of guage n.exc. 63mm, deposited, spread and levelled in layeres n.exc. 15 cm thick, watered and rammed to a true surface, as in below sub base, plinth protection and ramp, complete all as directed by Engr-in- Charge.
M&L PCC 100 mm thick, type C-2, 1:3:6 (40mm graded aggregate) as in sub-base, complete all as directed.
S&F powder coated aluminium sliding windows/ventilator, without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as directed by Engr-in-charge.
S&F Plain solid, straight chowkats and frames of second class shard wood wrought framed rabatted on the solid rounded or chamfered, put together with glue pinned at joints Complete all as specified and directed.
S&F 35mm thick, 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 3097 (Part I), kiln seasoned and chemically pressure treated all as directed.
Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described over 10 cm width or grith and painting with 2 coats of synthetic enamel paint over a coat of pink primer, Complete all as specified and directed.
S & F Aluminium alloy, anodised, sliding door bolt 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, Complete all as specified and directed.
S & F 200mm long mild steel barrel tower bolt of extruded section and fixed, Complete all as specified and directed.
S & F 150mm long mild steel handles cast type, Complete all as specified and directed.
S & F 100mm butt hinges medium weight cold rolled mild steel fixed with screws or welded Complete all as specified and directed.
S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified & directed by Engr-in-charge.
S&F in door closer hydraulically regulated, aluminium extruded section designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed by Engr-in-charge.
S&F in floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, 140mm length complete all as specified & directed by Engr-in-charge.
S&F solar control film 25 micron reflective type sticked to glass panes as per manufacturers instruction complete all as specified & directed by Engr-in-charge.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing complete all as specified and as directed.
S&F Anodised aluminium window & ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified
S&F 4.8 mm thick Sheet glass,ordinary quality pin headed type and glazing with Aluminium snap beading with rubber Neoprene packing in square not exc 0.5 sq. m in each pane all as specified and as directed
S&F 150mm long (Length of Bolt in mm) Aluminium anodised,barrel tower bolts of extruded section and fixed all as specified and directed.
S&F 150mm (Size of Handle in mm) Extruded aluminium alloy handles, fabricated type,anodised all as specified.
S&F in 300mm long (Length of Bolt in mm) Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.
M&L for reinforced cement concrete (Type B1 1:2:4, 20mm graded stone aggregate) Slabs supported on walls,manhole covers beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed
M&L machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thick M-35 grade etc complete (with grey cement and pigment) over sand cushioning. (Note : Sand cushioning shall be paid in appropriate item.)
M&L for sand filling under floors or in foundations including watering and consolidation
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15 mm thick screed bed in cement mortar 1:4 as in floor and skirting complete all as specifeid
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.
M&L for PCC type C-1, 1:3:6 (20mm graded aggregate) for bed blocks and similar work as specified.
S & F for steel work in tubular trusses including special shaped washer etc, coplete using ERW or induction butt welded tubes conforming to ISI 1161-1998 grade st-240.
S&F MS plate 6mm thick (Plain or chequred) channels, and counter sank) forming holes, with out any attachment FE-410-W (Code E - 250) Quality - B
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M&L for painting two coat of epoxy paint over a coat of epoxy primer on steel surfaces of any description, n.exc. 10cm in width or girth when unconnected with other painting including removing of existing painting by burning off by blow lamps and cleaning with scrapers including preparation of surfaces, complete all as directed by Engr-in-charge. (Note :- EPLUX 610 HBLD primer coating and two coats of EPILUX 155 High build Enamel finishing coat of Berger protection coating or Equivalent make).
Material and labour point wiring with 1.5 sqmm (nominal cross section area) single core PVC insulated unsheathed cable of 1100 Volts grade (FRLS) multistrand with copper conductor drawn through and including non metallic, rigid PVC conduit of adequate size with all fittings and conduit accessories concealed in wall/ceiling/floor/roof etc. including 1.6 mm thick sunk mild steel terminal box with 3mm thick plastic laminated sheet top cover, cadmium plated iron screws for housing the switches, socket outlets including provision of 1.5 sqmm green in colour PVC insulated copper conductor single core multistrand (FRLS) for earth continuity conductor and connected to common earth dolly all as specified for the following:-
(a) One light point control by one switch
(b) One ceiling fan/exhaust fan control by one switch
Ditto all as per item No. 63.00 above but wire 2.5 sq mm cable for One 3 pin socket 5 Amps on the same board with other switches
Ditto all as per item No. 63.00 above but wire 2.5 sq mm cable for One 3 pin socket 5 Amps socket as independent board
Ditto all as per item No. 63.00 above but wire 4.0 sq mm cable for switch socket outlet 3 pin 15 Amps with 4.0 sq mm as earth continuity conductor.
S & F Modular switch 1 way 6A, 1 module all as specified and directed by EIC.
S & F modular socket, Socket, 6A - 2/3 pin combined 2 module all as specified and directed by EIC.
S & F Socket 16A - 2/3 pin combined 2 module, all as specified and directed by EIC.
S & F Modular switch 1 way 16A, 1 module all as specified and directed by EIC.
Supply and fix ceiling rose three terminal ll as specified and directed by EIC.
Supply and fixing Modular fan regulator120Watt, 2- module , AC 240 Volts complete.
Supply and fix ceiling fan 1200 mm sweep 230 V AC, 5 Star rated with brushless direct current motor (BLDC) complete including connecting up with 3 core cord flexible from ceiling rose to fan etc all as specified and directed by Engr-in-charge.
Supply and fixing LED light fitting 1x 20 Watt,220 V AC decorative box type with driver , holder including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.
Supply and fixing LED street light fitting 35 Watt,230 V AC outdoor type with high pressure die aluminium housing and heat resistant complete with driver , lamp, with impact and corrosion resistanct including thermal management in multiple optics, including suitable size mounting bracket , clamps ,nut,bolts complete with IP 65/66 protection all as specified and directed by Engr-in-Charge.
S & F in replacement MCB DB made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, earth bar and Din rail ,240Volts SPN with 8 way Double door , IP-43-IK09 protection
S & F in replacement MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-32Amps
S & F MCB SP 6-32 Amps 'C' Series complete all as specified and directed.
M&L Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00 mm dia by means of bolts, nuts, check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit, charcoal common salt, Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe, PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate, PCC pit cover including earth work complete all as shown in electrical plate No-3 of SSR (part-I)
S& F XLPE insulated armoured and pvc sheated heavy duty electric cable size 3.5 core ,25 Sqmm cross sectional area with aluminium conductor 1100 volt grade as per IS 7098 (Part-1) 1988 with latest amendment laid in tranches passing through pipes /ducts including testing complete Note- rate is inclusive of cable gland & cable lugs.
Supply & fix Steel tubing GI light grade for cable protection passing under road /floor or for fixing to poles all as specified and as directed of size 40 mm dia along with necessary clamp duly painted with silver aluminuim paint nut bolt etc, including PVC bend of required size for cable entry at bottom of pole complete all as specified and directed.
S& F in replacement of laying of Double Walled Corrugated (DWC) HDPE pipe of size 50/38 mm outer/inner dia of conforming to IS 16205 Part -24 including necessary bends,coupling ,tees, reducers, spacers,end caps, rubber rings etc having pressure rating not less than 450 N through trenches/wall/floor/on pole in any type of soil for protection of electric cable complete all as directed by Engr-In Charge.
AADESH CONSTRUCTION
K K Construction Co
J J ENTERPRISES
OM ENTERPRISE
Vastushilp Building Designer
JAY BHARAT METAL SUPPLIERS
Bharat Enterprise
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .