Construction of R.W Section office Raikia-II at Karada_building

Earth work in excavation of foundation in hard soil within initial leads and lifts including dressing and levelling the bed and depositing the excavated earth places away from work site including all cost of labour, T&P Royalty, Cess etc. complete in all respect as directed by the Engineer-in-charge.

Filling foundation and plinth with fine coarse sand of approved quality with proper thick layer including watering, ramming with cost, conveyance, royalty, Cess and taxes of all materials and labour, T&P etc. complete as per specification and direction of the EIC

Filling foundation and plinth with excavated material including watering and ramming as directed by the EIC

Cement concrete of proportion (1:3:6) in foundation and plinth using 4cm size clean hard black hand broken granite metal of approved quality from approved quarry including hoisting lowering & laying concrete in layers to the required level including cost conveyance and royalty of all materials with all taxes and compacting watering curing and all labour with T&P articles required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

Providing and laying cement concrete (1:2:4) in foundation and plinth using 12mm size hard granite hand broken chips of approved quality from approved quarry including hoisting lowering and laying concrete in layers to the required thick including cost conveyance and Royalty Cess of al materials with all taxes and all labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

Fly ash brick work in CM (1:6) after immersing brick for six hours in water before use in foundation and plinth having crushing strength not less than 75Kg./Cm2 including splays cutting circular moulding and similar such type of work with necessary projections chamfering and corbelling watering and curing etc. complete including cost conveyance and royalty of all materials with all taxes and all labour with T&P articles required for the work etc. complete as per specifications and directions of E.I.C.

R.C.C. work of M-25 grde with 20mm down graded black hard granite crusher broken chips aggregates as per drawing and technical specification etc. complete with watering curing etc. including cost conveyance and Royalty, Cess of all materials with all taxes and compacting watering curing and all labour with T and P articles required for the work etc. complete as per specification and direction of the EIC 7.01(Foundation & Footing Base of Column )

Plinth Band

Column in Superstructure

Lintel

Chajja & Fins

Wall Beam & T Beams

Roof Slab

Providing supplying, fitting and fixing and placing in position H.Y.S.D bar reinforcement complete as per drawings and technical specifications clause 1000 and 1202 of MORD and direction of the E.I.C.

Fly ash brick work in CM (1:6) after immersing brick for six hours in water before use in superstructure having crushing strength not less than 75Kg./Cm2 including splays cutting circular moulding and similar such type of work with necessary projections chamfering and corbelling watering and curing etc. complete including cost conveyance and royalty of all materials with all taxes and all labour with T&P articles required for the work etc. complete as per specifications and directions of E.I.C.

Brick work with Fly ash bricks 23cm x 11cm x 8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:4) in Superstructure with cost & conveyance of all material, royalty and taxes of all materials, cost of labour, T&P required for the work etc. complete as per direction of the Engineer-in-Charge .

20mm. thick grading Plaster (1:4) on roof slab on new works with cost & conveyance of all material, royalty and taxes of all materials, cost of labour, T&P required for the work etc. complete as per direction of the Engineer-in-Charge.

12mm (1/2) thick cement plaster in Cement mortar (1:4) finished smooth to brick walls after racking out the joints of brick work with watering curing and cost conveyance, Royalty, Cess taxes of all materials all labour T&P etc. complete in all respect in all floors as per specification and direction of the Engineer-in-charge.

16mm thick cement plaster in CM(1:6) finished smooth to inside brick walls after racking out the joints including watering, curing etc. with cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.

Finishing wall suface of walls with Acrylic wall putty (Water based) of approved make and finshed smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes. Labour T & P etc complete as per direction of the Engineer-in-Charge.

Providing fitting fixing Vitrified tiles in floors & treads of size having thickness 6mm to 10mm and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.

Providing fitting fixing Vitrified tiles in dados skirting and risers of steps 12mm thick bed cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.

Providing fitting fixing of Chequred tiles in floors treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.

Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures etc. complete as per direction of the Engineer-in-Charge.

Providing,fitting,fixing of Gypsum Board ceiling including all fitting,cost of all materials,all taxes,labour, T&P etc.complete as per direction of the Engineer-in-charge.

Supplying fitting nd fixing of M.S. iron doors & windows choukath with shutter and flat & angel frames grill made out of M.S,.flat grill gate made out of iron plate shutter with angel choukath with cost of grill including cost conveyance of all material labour all type of taxes etc. complete as per specification and direction of the Engineer-in-Charge

Supplying fitting and fixing hand railing of Stainless steel of 304 grade using 50mm dia of 2mm thick circular pipe with Balustrde of size 32mm x 32mm x 2mm @ 0.90mtr C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification buffing polishing etc. with cost conveyance taxes of all materials cost of all labour T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-Charge

Painting two coats over new wood/iron work with any approved paints over a coat of primer including all labour T&P artiels required for the work etc. complete in all respect as per the specification and direction of the Engineer-in-Charge

Providing distempering two coats to wall surface over a coat of cement primer with any approved distemper of approved shade including cost of distemper with conveyance taxes of all materials aznd labour T&P etc. complete as per the direction of the Engineer-in-Charge

Wall painting two coats with any approved quality of weather seal coat over a coat of priming on new work to an even shade including cost of distemper with conveyance taxes of all materials aznd labour T&P etc. complete as per the direction of the Engineer-in-Charge

COMPOUND WALL Earth work in excavation of foundation in hard soil within initial leads and lifts including dressing and levelling the bed and depositing the excavated earth places away from work site including all cost of labour, T&P Royalty, Cess etc. complete in all respect as directed by the Engineer-in-charge.

Filling foundation and plinth with fine coarse sand of approved quality with proper thick layer including watering, ramming with cost, conveyance, royalty, Cess and taxes of all materials and labour, T&P etc. complete as per specification and direction of the EIC

Filling foundation and plinth with excavated material including watering and ramming as directed by the EIC

Cement concrete of proportion (1:3:6) in foundation and plinth using 4cm size clean hard black hand broken granite metal of approved quality from approved quarry including hoisting lowering & laying concrete in layers to the required level including cost conveyance and royalty of all materials with all taxes and compacting watering curing and all labour with T&P articles required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

Fly ash brick work in CM (1:6) after immersing brick for six hours in water before use in foundation and plinth having crushing strength not less than 75Kg./Cm2 including splays cutting circular moulding and similar such type of work with necessary projections chamfering and corbelling watering and curing etc. complete including cost conveyance and royalty of all materials with all taxes and all labour with T&P articles required for the work etc. complete as per specifications and directions of E.I.C.

2.5cm thick damp proof course with C.C. (1:2:4) using 12mm size hard granite hand broken chips of approved quality from approved quarry including hoisting lowering and laying concrete in layers to the required thick including cost conveyance and Royalty Cess of al materials with all taxes and all labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

Fly ash brick work in CM (1:6) after immersing brick for six hours in water before use in superstructure having crushing strength not less than 75Kg./Cm2 including splays cutting circular moulding and similar such type of work with necessary projections chamfering and corbelling watering and curing etc. complete including cost conveyance and royalty of all materials with all taxes and all labour with T&P articles required for the work etc. complete as per specifications and directions of E.I.C.

R.C.C. work of M-25 grde with 20mm down graded black hard granite crusher broken chips aggregates as per drawing and technical specification etc. complete with watering curing etc. including cost conveyance and Royalty, Cess of all materials with all taxes and compacting watering curing and all labour with T and P articles required for the work etc. complete as per specification and direction of the EIC32.01 (Column base)

Plinth Band

Column in Sueprstructure (Ground Floor)

Lintel

Providing supplying, fitting and fixing and placing in position H.Y.S.D bar reinforcement complete as per drawings and technical specifications clause 1000 and 1202 of MORD and direction of the E.I.C.

12mm (1/2) thick cement plaster in Cement mortar (1:6) finished smooth to brick walls after racking out the joints of brick work with watering curing and cost conveyance, Royalty, Cess taxes of all materials all labour T&P etc. complete in all respect in all floors as per specification and direction of the Engineer-in-charge.

16mm thick cement plaster in CM(1:6) finished smooth to inside brick walls after racking out the joints including watering, curing etc. with cost conveyance royalty taxes and Cess of the materials and labour T&P etc. complete as per specification and direction of the Engineer-in-Charge.

Supplying fitting and fixing of M.S. iron doors & windows choukath with shutter and flat & angel frames grill made out of M.S,.flat grill gate made out of iron plate shutter with angel choukath with cost of grill including cost conveyance of all material labour all type of taxes etc. complete as per specification and direction of the Engineer-in-Charge

Painting two coats over new wood/iron work with any approved paints over a coat of primer including all labour T&P artiels required for the work etc. complete in all respect as per the specification and direction of the Engineer-in-Charge

Wall painting two coats with any approved quality of weather seal coat over a coat of priming on new work to an even shade including cost of distemper with conveyance taxes of all materials aznd labour T&P etc. complete as per the direction of the Engineer-in-Charge

APPROACH ROAD & SITE DEVELOPMENT Cement concrete of proportion (1:3:6) in foundation and plinth using 4cm size clean hard black hand broken granite metal of approved quality from approved quarry including hoisting lowering & laying concrete in layers to the required level including cost conveyance and royalty of all materials with all taxes and compacting watering curing and all labour with T&P articles required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

Providing & laying Cement Concrete (1:2:4) in foundation and plinth using 12mm size hard granite hand broken chips of approved quality from approved quarry including hoisting lowering and laying concrete in layers to the required thick including cost conveyance and Royalty Cess of al materials with all taxes and all labour with T&P required for the work etc. complete as per specification and direction of the Engineer-in-Charge.

Filling foundation and plinth with fine coarse sand of approved quality with proper thick layer including watering, ramming with cost, conveyance, royalty, Cess and taxes of all materials and labour, T&P etc. complete as per specification and direction of the EIC

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5 kms spreading, grading to required slope and compacting to meet requirement etc. complete as per direction of the Engineer-in-Charge .