Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.2 LAccepted-AOC MISSAMARI DIST SONITPUR ASSAM 784 506 | SONITPUR | ASSAM | 784506 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹34.6 L+₹2.0 L (5.98%)Rejected-Finance RANGAPARA TOWN WARD NO 1 PS PO RANGAPARA DIST SONITPUR ASSAM | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹35.4 L+₹2.7 L (8.31%)Rejected-Finance P O P S MISSAMARI DIST SONITPUR ASSAM 784506 | SONITPUR | ASSAM | 784506 | L3 | Rejected-Finance NOT BEING LOWEST | |
| 4 | L4₹36.0 L+₹3.3 L (10.1%)Rejected-Finance POST MISAMARI DIST SONITPUR ASSAM 784 506 | SONITPUR | ASSAM | 784506 | L4 | Rejected-Finance NOT BEING LOWEST |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
24 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MISAMARI
PO-Missamari Dist-Sonitpur Assam
CERTAIN BR REPAIR MAINTENANCE WORK TO EM INSTALLATION UNDER GE MISSAMARI
2023_MES_598969_1
8364
Open Tender
Civil Works
Item Rate
270 days
GE MISAMARI
PLEASE REFER TENDER DOCUMENTS
2 documents required · 2 mandatory
₹500
Yes
GE MISAMARI
₹80,000
Yes
18 Dec 2023
27 May 2023
27 Jun 2023
27 May 2023
24 Jun 2023
10 Jun 2023
Amount
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Dismantling Posts or Struts (Wood, Steel or RCC) any Section, Posts embedded in Concret,brickwork.masonry.etc., including taking out embedded portion and making good disturbed ground, complete all as specified and as directed. NOTE : Excavating in Post Holes will be measured and paid separately under relevant Items.
Dismantling fencing wire mesh, of any type and any description, complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for 100 mm thick cement concrete type D-2 (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified and directed.
M&L for 50 mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed complete all as specified and directed.
M&L for foundation 1:3:6 type C2 using (40mm graded stone aggregate) in fdn filling as in post holes complete all as specified and directed.
M&L for MS work for fencing post and struts made from angle iron and flat iron including cutting tops to shape, drilling holes and notching for fixing of wires etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work confirming to Fe -290 Gde E-165 , complete all as specified and directed.
M&L for Round bars 10 mm dia and over Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) cut to length, bent to shape required including cranking, bending spirally for hooping for Columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and as directed.
Supply only Chain Link Fencing 100x100mm Mesh with 4.0mm dia Mild Steel Galvanised Wire, lapped, straining and binding with including Mild Steel Binding Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. NOTE : Cost of Mild Steel Binding Wire deemed to be included in the Quoted Unit Rate.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standars, rails, straining bolts, etc, including provision of binding wire complete all as specified and directed.
S&F in Repairs Galvanised 2 Strand, Steel Barbed Wire 2.24mm dia barbed with 2mm dia Barbs at 75mm spacings and straining and fixing to any type of Standard Rails straining Bolts, including securing or tying at crossings with and provision of Galvanised Mild Steel Wire, Staples or Steel Pins, etc., complete all as specified and as directed. NOTE : Cost of Mild Steel Binding Wire deemed to be included in the Quoted Unit Rate.
S&F for 11 to 15 mm dia of neck mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc.10 cm and n exc. 15cm long complete.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a redoxide primer complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed.
S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed.
S& F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed.
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates to Fe-290 (Gde E- 165) complete all as specified and directed.
Taking down cement plaster including racking out joints, hacking for key scrubbing down with water etc including removal of rubbish material from site, complete all as specified and directed.
M&L for rendering 20mm thick plaster in CM 1:4 mixed with water proofing compound on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.
M&L for 15 mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement, complete all as specified and directed.
M&L for 5mm thick plaster in cm (1:3) on fair faces of concrete surfaces of ceiling including finishing even & smooth without using extra cement, complete all as specified and directed.
Supply only for water proofing compound, complete all as specified and directed.
S & F MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, quality confirming to Fe-290 (Gde-E-165) complete all as specified and directed.
M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top including Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete.:- (i) Screed bed or bedding layer of mortar 10 mm thick in CM 1:4 for laying as in roof slab with mixing of WPC and surface finished fare and smooth. (ii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.40ltr /Sqm conforming to IS:3384-1986. (iii) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be less applied over bituminous primer as specified above over a Application of polymeric membrance shall by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (iv) Applying two coat of aluminum paint over the APP modified membrance.
Taking down chowkhats or frame with shutter without taking off shutter from the frame n exc 1.50 sqm each & removing from site complete all as specified and directed.
Taking down chowkhats or frame with shutter without taking off shutter from the frame exc 1.50 sqm but not exc 4 sqm each & removing from site complete all as specified and directed.
Taking down chowkhats or frame with shutter exc 1.50 sqm but not exc 4 sqm each & removing from site complete all as specified and directed.
S&F factory made steel window with double shutter (glazed and mosquito proof shutter of stainless steel wire mesh) with side/top hung shutter with projecting type hinges, steel handle steel peg stay with and including guard bars of 12mm square bars complete all as specified and directed. (Stainless steel wire mesh will be measured and paid separately).
S & F glazed and and Skelton shutter, open rebated and prepared to receive glass, gauze, etc 35mm thick but divided into square, with plain chamfered or rounded mitered and rebated sash bars any numbers 2nd class H.W complete all as specified and directed.
S & F plain framed paneled shutter (2nd class H.W). 35mm thick (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial faces veneers, complete all as specified and directed.
S & F 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fixed in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F in repairs 100 mm size butt stainless steel hinges cold rolled medium weight complete all as specified and directed.
S&F in repairs aluminium handles cast type anodised size 150 mm long, complete all as specified and directed.
S&F aluminium anodiesed barrel tower bolt of extruded section size 200 mm, complete all as specified and directed.
Supply and fixing 300 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average with of aperture 1.40mm, complete all as specified and directed.
Hacking out old broken glass (any thickness size quality or description) from wooden pane glazed with putty or fixed with wooden bends complete all as specified and directed.
S&F Sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane including fixed with wooden beads/glazing pins or spring clips in wooden or metal frames complete all as specified and as directed.
M&L for Preparation of new wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over coat of pink primer, complete all as specified and directed.
S&F in repair fancy type CP short body bib tap foam flow cast copper alloy 15 mm bore screwed down screwed for iron pipe or for brass ferrule, complete all as specified and directed.
S&F in repair fancy type CP, 15 mm dia stop/angle valves, cast copper alloy screwed above high pressure with crutch or butterfly handle and screwed both ends for iron or for union, complete all as specified and directed.
S&F in repair PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle including flush pipe of CP brass suitable for IWC/EWC, 10 Lit capacity, complete all as specified and directed.
S&F in repair Wash hand basin, flat back 550x400mm, vitreous china (white) including the following and fixed in repairs ccomplete all as specified and directed. (a) Brass, chromium plated waste fittings, 32mm bore size (b) Waste pipe, PVC, 32mm bore (c) Angle iron/cast iron brackets of required size as directed. (d) Making good disturbed surfaces to match with the existing.
S&F in repair PVC connection 15 mm size with PTMT nut of length 450/600 mm complete all as specified and directed.
S&F in repair vitreous china, orrisa pattern water closet seat of size 580mm x 440mm white with and incl 'P' or 'S' trap and provision of lime concrete bedding in repairs complete all as specified and directed.
M&L for 15mm dia bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors incl taking up or down steel tubing 15mm bore complete all as specified & directed
S&F in repair retro reflective sign board of size 900mmx600mmx4mm thick aluminium composite panel sheet with writing letters of size 4 inch including arrows and border on both sides of board with high intensity prismatic reflecting white tape duly framed with 25mm dia stainless steel pipe and 60mm dia stainless steel pipe post of height 2.60m above GL and 0.60m below GL with necessary anchoring plate of size 150x150x3mm thick (MS) fitted with 16 gauge SS round globe on post fixed in ground wiht PCC blcok type B1 1:2:4 (20mm graded stone aggregate) of size 600x600x600mm incl exc returning filling and removal of surplus soil and make good as directed complete all as specified and directed. (Note :- Stainless Steel of Grade : 304).
Demolition of stone slabs tiles of any description or thickness in floors aprons laid bedded and pointed in any morter etc, complete all as specified and directed.
M&L for Machine cut kota stone flooring 20-25 mm thick over 20 mm thick cement screed 1:6 base laid and jointed with gey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, complete all as specified and directed.
M&L for Machine cut kota stone flooring 20-25 mm thick over 10 mm thick cement screed 1:4 back ing in vertical surfaces and jointed with gey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, complete all as specified and directed.
M&L for loose filling of aggregates of gauge 40 to 80 mm in broken stone or boulders including taking out existing stone or boulders complete all as specified and as directed.
Demolition of re-inforcment cement concrete of any description and in any position not otherwise specifically provided, complete all as specified and directed.
M&L for precast RCC (1:2:4) type B1 using 20 mm graded stone aggregate as in cover slab and set in cement mortar (1:6) including necessary form work and mould complete all as specified and as directed.
M&L for TMT Bars 10mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and as directed.
Demolition of brick work built in cement mortar incl all quoins arches pillars etc of any description, complete all as specified and directed.
M&L for Brick Work with Sub-Class ‘B’ Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.
M&L for brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for Heavy duty Vitrified Coloured Ceramic Tiles 300x300x8-10mm thick (dura stone) or equivelent , in Floors, set and jointed in Neat Cement Slurry and pointed in White Cement mixed with Pigment to match the colour of Tiles including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished fair and even , complete all as specified and directed.
M & L for Non skid mat finish ceramic coloured tiles 7 to 8 mm thick (Square or Rectangular) area of each tile exc. 0.18 Sqm but not exc. 0.36 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished fair and even complete all as specified and directed.of tile complete all as specified and directed.
M&L for Glazed ceramic colour tiles of size 300 x 450-7mm/300x600x7mm thick in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete as specified and directed.
M&L for 75 mm thick cement concrete as in plinth protection type C-2 1:3:6 (using 40mm graded aggregate) finishing concrete surface even and smooth with using extra cement complete all as specified and directed.
M&L for Cement Concrete 1:2:4 (20mm graded aggregate) as in Kerbs, Coping, mud stops etc. including weathering, slightly rounded or Chamfered angles and throating including use and waste of Formwork as required/ordered at Site(s), complete all as specified and as directed
M & L for preparation of old painted wooden surfaces of any description over 10cm width or girth & applying one coat of synthetic enamel paint of approved quality, complete all as specified and directed.
M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted concrete/brickwork plastered surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
M & L for Writing letters or figures (Black,Roman,Italic, or Indian ) not exc 30 cm height including complete removal of existing surface and base coat painting two coats over one coat prmer on plastered surface etc.complete all as specified and directed.
M & L for preparation of newly plastered surfaces of ceilings and apply three coats of white wash complete all as specified and directed.
M & L for preparation of newly plastered surface of walls and apply two coats of acrylic distember including one coat of chalk whiting on plastered surface to preparatory to distembering complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer, complete all as specified and as directed.
M&L for preparation of old wall surface applying one coat of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/10 sqm complete all as specified and directed.
M&L for complete removal of old surface wall and applying Two coats of 100% premium acrylic emulsion paint with silicone additives of required shade additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 litre/10 sqm over complete all as specified and directed.
M&L for preparation of old wall surface applying one coat of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/10 sqm complete all as specified and directed. Note:-Height up to 25 m
M&L for Complete removal of existing old treatment as in wall,applying two coat of acrylic ditemper on wall including 1 mm wall care putty complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces of wall and applying one coat of oil bound distemper complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces of wall and applying one coat of cement base paint, complete all as specified and directed.
M&L for Complete removal of existing old treatment of walls including cornices, plasters etc and applying two coat of white wash complete all as specified and directed
M & L for preparation of old decorated plastered or unplastered surfaces on cellings, complete all as specified and directed.
United Traders
M/S RANA ENGINEERING ENTERPRISE
RC Madan
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .