Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 CrAdmitted-Finance | ₹1.2 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.3 Cr+₹10.6 L (9.03%)Admitted-Finance | ₹1.3 Cr+₹10.6 L (9.03%) | L2 | Admitted-Finance |
| 3 | L3₹1.3 Cr+₹11.9 L (10.2%)Admitted-Finance I 910 JAHANGIR PURI NEAR BY ANAND MAYA HOSPITAL NORTH WEST DELHI DELHI 110033 UDYAM DL 06 0040830 | NORTH DELHI | DELHI | 110033 | ₹1.3 Cr+₹11.9 L (10.2%) | L3 | Admitted-Finance |
| 4 | L4₹1.3 Cr+₹12.2 L (10.4%)Admitted-Finance | ₹1.3 Cr+₹12.2 L (10.4%) | L4 | Admitted-Finance |
| 5 | L5₹1.3 Cr+₹15.4 L (13.2%)Admitted-Finance | ₹1.3 Cr+₹15.4 L (13.2%) | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | KR POWER INFRA INDIA PVT LTD. L6 | SATISH AND CO L3 | CHINAR CONSTRUCTION TRADERS L7 | M/S KULBIR SINGH SODHI AND CO L2 | M/S M.A. Construction L5 | ALCO ENGINEERSPVT LTD L1 | M/S Razdan Buildersand suppliers L4 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply and fix 200 KVA HT AVR with input voltage 7 KV to 11 KV and out put voltage 11 KV + 1% , copper wound with filling of transformer oil complete as follows and all as specified and as directed by Engr-in-Charge. Make : Electric Field Company / Powerware ( SAI Electrical ) / Indian Transformers and Electricals Pvt.Ltd. (ITE Gurgaon ) | 1 | EACH | 13,00,000 ₹13,00,000 | 11,80,000 ₹11,80,000 | 13,10,000 ₹13,10,000 | 12,30,000 ₹12,30,000 | 17,50,000 ₹17,50,000 | 7,00,000 ₹7,00,000 Lowest | 10,98,404 ₹10,98,404 |
| 1.01(a) Input Voltage : 7 KV - 11 KV (b) Output Voltage : 11 KV ± 1% (c) Type Suitable for : BALANCED SUPPLY UNBALANCED LOAD (d) Application : Completely Outdoor Type (e) Standard : IS 2026/77 (f) Phase : 3-Ph, 3 Wires (g) Frequency : 50 Hz (h) Response Time : Instantaneous (mili sec) (j) Speed of Correction : 80 v to 85 V/sec (k) Mode of Operation : Automatic/Manual/Hand Control (l) Suitability : Suitable for all Power Factors. (m) Duty Cycle : Continuous 24 Hrs. at 100% Load (n) Efficiency : More than 99% (o) Cooling : ONAN (Oil Natural Air Natural) (p) Transformer : Oil "A Grade" tested & Certified as per IS 335. (q) Operating temperature : 0°C - 45°C Above Ambient (r) Laminations Used : Imported Low Losses CRGO Laminations - M4 Grade. (s) Carbon Rollers : Used Imported High Grade Graphite Rollers (t) Copper Wound Stepdown : Transformer Double wound. (u) On Load Stepless Voltage : Copper auto wound and delta connected. (v) Buck n Boost Transformer : Double Copper Wound, Open/Open connected | ||||||||||
| 1.02(w) Automatic Control Gear consisting : (i) One electronic voltage relay (ii) One reversing geared motor unit (iii) Two limits switches in order to avoid over running highest and lowest positions (iv) Chain drive, coupling device and all electrical connections (x) AVR will be incorporated inside high quality epoxy painted sheet steel tank fitted with cooling radiators as required and mounted on uni-directional wheels, other fittings would include as follows: (i) Lifting Lugs (ii) Earthing Terminals (iii) Drain Valve (iv) Conservator Oil (v) Filling Hole (vi) Dial Type OilTemp. (vii) Indicator Oil Level indicators (viii) Rating Plate (ix) Filter Valve (x) Silica Gel (xi) Dehydrating Breather (xii) Explosion Vents (xiii) Buchholz Relay with alarm & trip contacts (xiv) Air Release Plug (xv) Oil conservator with oil level gauge (xvi) Marshalling Box HV cable Box | ||||||||||
| 2.00 | Supply and fix 160 KVA HT AVR with input voltage 7 KV to 11 KV and out put voltage 11 KV + 1%, copper wound with filling of transformer oil complete as follows and directed by Engr-in-charge :- Make : Electric Field Company / Powerware ( SAI Electrical ) / Indian Transformers and Electricals Pvt.Ltd. (ITE Gurgaon ) | 1 | EACH | 11,00,000 ₹11,00,000 | 10,84,000 ₹10,84,000 | 11,80,000 ₹11,80,000 | 10,80,000 ₹10,80,000 | 14,49,999 ₹14,49,999 | 7,00,000 ₹7,00,000 Lowest | 9,98,000 ₹9,98,000 |
| 2.01(a) Input Voltage : 7 KV - 11 KV (b) Output Voltage : 11 KV ± 1% (c) Type Suitable for : BALANCED SUPPLY UNBALANCED LOAD (d) Application : Completely Outdoor Type (e) Standard : IS 2026/77 (f) Phase : 3-Ph, 3 Wires (g) Frequency : 50 Hz (h) Response Time : Instantaneous (mili sec) (j) Speed of Correction : 80 v to 85 V/sec (k) Mode of Operation : Automatic/Manual/Hand Control (l) Suitability : Suitable for all Power Factors. (m) Duty Cycle : Continuous 24 Hrs. at 100% Load (n) Efficiency : More than 99% (o) Cooling : ONAN (Oil Natural Air Natural) (p) Transformer : Oil "A Grade" tested & Certified as per IS 335. (q) Operating temperature : 0°C - 45°C Above Ambient (r) Laminations Used : Imported Low Losses CRGO Laminations - M4 Grade. (s) Carbon Rollers : Used Imported High Grade Graphite Rollers (t) Copper Wound Stepdown : Transformer Double wound. (u) On Load Stepless Voltage : Copper auto wound and delta connected. (v) Buck n Boost Transformer : Double Copper Wound, Open/Open connected | ||||||||||
| 2.02w) Automatic Control Gear consisting : (i) One electronic voltage relay (ii) One reversing geared motor unit (iii) Two limits switches in order to avoid over running highest and lowest positions (iv) Chain drive, coupling device and all electrical connections (x) AVR will be incorporated inside high quality epoxy painted sheet steel tank fitted with cooling radiators as required and mounted on uni-directional wheels, other fittings would include as follows: (i) Lifting Lugs (ii) Earthing Terminals (iii) Drain Valve (iv) Conservator Oil (v) Filling Hole (vi) Dial Type OilTemp. (vii) Indicator Oil Level indicators (viii) Rating Plate (ix) Filter Valve (x) Silica Gel (xi) Dehydrating Breather (xii) Explosion Vents (xiii) Buchholz Relay with alarm & trip contacts (xiv) Air Release Plug (xv) Oil conservator with oil level gauge (xvi) Marshalling Box HV cable Box | ||||||||||
| 3.00 | Supply and fix 100 KVA HT AVR with input voltage 7 KV to 11 KV and out put voltage 11 KV + 1%, copper wound with filling of transformer oil complete with the following and as directed by Engr-in-charge. Make : Electric Field Company / Powerware ( SAI Electrical ) / Indian Transformers and Electricals Pvt.Ltd. (ITE Gurgaon ) | 11 | EACH | 8,50,000 ₹93,50,000 | 7,70,000 ₹84,70,000 | 10,75,000 ₹1,18,25,000 | 7,20,000 ₹79,20,000 | 6,90,000 ₹75,90,000 Lowest | 7,00,000 ₹77,00,000 | 7,93,000 ₹87,23,000 |
| 3.01(a) Input Voltage : 7 KV - 11 KV (b) Output Voltage : 11 KV ± 1% (c) Type Suitable for : BALANCED SUPPLY UNBALANCED LOAD (d) Application : Completely Outdoor Type (e) Standard : IS 2026/77 (f) Phase : 3-Ph, 3 Wires (g) Frequency : 50 Hz (h) Response Time : Instantaneous (mili sec) (j) Speed of Correction : 80 v to 85 V/sec (k) Mode of Operation : Automatic/Manual/Hand Control (l) Suitability : Suitable for all Power Factors. (m) Duty Cycle : Continuous 24 Hrs. at 100% Load (n) Efficiency : More than 99% (o) Cooling : ONAN (Oil Natural Air Natural) (p) Transformer : Oil "A Grade" tested & Certified as per IS 335. (q) Operating temperature : 0°C - 45°C Above Ambient (r) Laminations Used : Imported Low Losses CRGO Laminations - M4 Grade. (s) Carbon Rollers : Used Imported High Grade Graphite Rollers (t) Copper Wound Stepdown : Transformer Double wound. (u) On Load Stepless Voltage : Copper auto wound and delta connected. (v) Buck n Boost Transformer : Double Copper Wound, Open/Open connected | ||||||||||
| 3.02(w) Automatic Control Gear consisting : (i) One electronic voltage relay (ii) One reversing geared motor unit (iii) Two limits switches in order to avoid over running highest and lowest positions (iv) Chain drive, coupling device and all electrical connections (x) AVR will be incorporated inside high quality epoxy painted sheet steel tank fitted with cooling radiators as required and mounted on uni-directional wheels, other fittings would include as follows: (i) Lifting Lugs (ii) Earthing Terminals (iii) Drain Valve (iv) Conservator Oil (v) Filling Hole (vi) Dial Type OilTemp. (vii) Indicator Oil Level indicators (viii) Rating Plate (ix) Filter Valve (x) Silica Gel (xi) Dehydrating Breather (xii) Explosion Vents (xiii) Buchholz Relay with alarm & trip contacts (xiv) Air Release Plug (xv) Oil conservator with oil level gauge (xvi) Marshalling Box HV cable Box | ||||||||||
| 4.00 | Supplying and laying un-reinforced precast concrete cable cover, class HVP, type 1 with peak, size 300mm x 180mm x 40mm complete all as specified and directed. | 1,500 | EACH | 90 ₹1,35,000 | 30 ₹45,000 | 60 ₹90,000 | 35 ₹52,500 | 80 ₹1,20,000 | 40 ₹60,000 | 21 ₹31,500 Lowest |
Tender Value
₹1.2 Cr
EMD Value
₹2.0 L
Closing Date
22 Oct 2022, 6:00 pmClosed
CWE, HQ 133 WORKS ENGRS
HQ 133 WKS ENGRS
PROVN OF AUTOMATIC VOLTAGE REGULATOR AVR FOR BONIYAR RAMPUR MOHURA AND BANDI GARRISON UNDER GE 969 EWS
2022_MES_553188_1
CWEK-43/2022-23
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE 969 EWS
Class B Category b ii
7 documents required · 7 mandatory
₹1,000
GE 969 EWS
₹2.0 L
HQ 133 WORKS ENGRS
31 Oct 2022
20 Sept 2022
29 Oct 2022
20 Sept 2022
22 Oct 2022
8 Oct 2022
20 Sept 2022 - 26 Sept 2022
1 Oct 2022
Amount
Supply and fix 200 KVA HT AVR with input voltage 7 KV to 11 KV and out put voltage 11 KV + 1% , copper wound with filling of transformer oil complete as follows and all as specified and as directed by Engr-in-Charge. Make : Electric Field Company / Powerware ( SAI Electrical ) / Indian Transformers and Electricals Pvt.Ltd. (ITE Gurgaon )
(a) Input Voltage : 7 KV - 11 KV (b) Output Voltage : 11 KV ± 1% (c) Type Suitable for : BALANCED SUPPLY UNBALANCED LOAD (d) Application : Completely Outdoor Type (e) Standard : IS 2026/77 (f) Phase : 3-Ph, 3 Wires (g) Frequency : 50 Hz (h) Response Time : Instantaneous (mili sec) (j) Speed of Correction : 80 v to 85 V/sec (k) Mode of Operation : Automatic/Manual/Hand Control (l) Suitability : Suitable for all Power Factors. (m) Duty Cycle : Continuous 24 Hrs. at 100% Load (n) Efficiency : More than 99% (o) Cooling : ONAN (Oil Natural Air Natural) (p) Transformer : Oil "A Grade" tested & Certified as per IS 335. (q) Operating temperature : 0°C - 45°C Above Ambient (r) Laminations Used : Imported Low Losses CRGO Laminations - M4 Grade. (s) Carbon Rollers : Used Imported High Grade Graphite Rollers (t) Copper Wound Stepdown : Transformer Double wound. (u) On Load Stepless Voltage : Copper auto wound and delta connected. (v) Buck n Boost Transformer : Double Copper Wound, Open/Open connected
(w) Automatic Control Gear consisting : (i) One electronic voltage relay (ii) One reversing geared motor unit (iii) Two limits switches in order to avoid over running highest and lowest positions (iv) Chain drive, coupling device and all electrical connections (x) AVR will be incorporated inside high quality epoxy painted sheet steel tank fitted with cooling radiators as required and mounted on uni-directional wheels, other fittings would include as follows: (i) Lifting Lugs (ii) Earthing Terminals (iii) Drain Valve (iv) Conservator Oil (v) Filling Hole (vi) Dial Type OilTemp. (vii) Indicator Oil Level indicators (viii) Rating Plate (ix) Filter Valve (x) Silica Gel (xi) Dehydrating Breather (xii) Explosion Vents (xiii) Buchholz Relay with alarm & trip contacts (xiv) Air Release Plug (xv) Oil conservator with oil level gauge (xvi) Marshalling Box HV cable Box
Supply and fix 160 KVA HT AVR with input voltage 7 KV to 11 KV and out put voltage 11 KV + 1%, copper wound with filling of transformer oil complete as follows and directed by Engr-in-charge :- Make : Electric Field Company / Powerware ( SAI Electrical ) / Indian Transformers and Electricals Pvt.Ltd. (ITE Gurgaon )
(a) Input Voltage : 7 KV - 11 KV (b) Output Voltage : 11 KV ± 1% (c) Type Suitable for : BALANCED SUPPLY UNBALANCED LOAD (d) Application : Completely Outdoor Type (e) Standard : IS 2026/77 (f) Phase : 3-Ph, 3 Wires (g) Frequency : 50 Hz (h) Response Time : Instantaneous (mili sec) (j) Speed of Correction : 80 v to 85 V/sec (k) Mode of Operation : Automatic/Manual/Hand Control (l) Suitability : Suitable for all Power Factors. (m) Duty Cycle : Continuous 24 Hrs. at 100% Load (n) Efficiency : More than 99% (o) Cooling : ONAN (Oil Natural Air Natural) (p) Transformer : Oil "A Grade" tested & Certified as per IS 335. (q) Operating temperature : 0°C - 45°C Above Ambient (r) Laminations Used : Imported Low Losses CRGO Laminations - M4 Grade. (s) Carbon Rollers : Used Imported High Grade Graphite Rollers (t) Copper Wound Stepdown : Transformer Double wound. (u) On Load Stepless Voltage : Copper auto wound and delta connected. (v) Buck n Boost Transformer : Double Copper Wound, Open/Open connected
w) Automatic Control Gear consisting : (i) One electronic voltage relay (ii) One reversing geared motor unit (iii) Two limits switches in order to avoid over running highest and lowest positions (iv) Chain drive, coupling device and all electrical connections (x) AVR will be incorporated inside high quality epoxy painted sheet steel tank fitted with cooling radiators as required and mounted on uni-directional wheels, other fittings would include as follows: (i) Lifting Lugs (ii) Earthing Terminals (iii) Drain Valve (iv) Conservator Oil (v) Filling Hole (vi) Dial Type OilTemp. (vii) Indicator Oil Level indicators (viii) Rating Plate (ix) Filter Valve (x) Silica Gel (xi) Dehydrating Breather (xii) Explosion Vents (xiii) Buchholz Relay with alarm & trip contacts (xiv) Air Release Plug (xv) Oil conservator with oil level gauge (xvi) Marshalling Box HV cable Box
Supply and fix 100 KVA HT AVR with input voltage 7 KV to 11 KV and out put voltage 11 KV + 1%, copper wound with filling of transformer oil complete with the following and as directed by Engr-in-charge. Make : Electric Field Company / Powerware ( SAI Electrical ) / Indian Transformers and Electricals Pvt.Ltd. (ITE Gurgaon )
(a) Input Voltage : 7 KV - 11 KV (b) Output Voltage : 11 KV ± 1% (c) Type Suitable for : BALANCED SUPPLY UNBALANCED LOAD (d) Application : Completely Outdoor Type (e) Standard : IS 2026/77 (f) Phase : 3-Ph, 3 Wires (g) Frequency : 50 Hz (h) Response Time : Instantaneous (mili sec) (j) Speed of Correction : 80 v to 85 V/sec (k) Mode of Operation : Automatic/Manual/Hand Control (l) Suitability : Suitable for all Power Factors. (m) Duty Cycle : Continuous 24 Hrs. at 100% Load (n) Efficiency : More than 99% (o) Cooling : ONAN (Oil Natural Air Natural) (p) Transformer : Oil "A Grade" tested & Certified as per IS 335. (q) Operating temperature : 0°C - 45°C Above Ambient (r) Laminations Used : Imported Low Losses CRGO Laminations - M4 Grade. (s) Carbon Rollers : Used Imported High Grade Graphite Rollers (t) Copper Wound Stepdown : Transformer Double wound. (u) On Load Stepless Voltage : Copper auto wound and delta connected. (v) Buck n Boost Transformer : Double Copper Wound, Open/Open connected
(w) Automatic Control Gear consisting : (i) One electronic voltage relay (ii) One reversing geared motor unit (iii) Two limits switches in order to avoid over running highest and lowest positions (iv) Chain drive, coupling device and all electrical connections (x) AVR will be incorporated inside high quality epoxy painted sheet steel tank fitted with cooling radiators as required and mounted on uni-directional wheels, other fittings would include as follows: (i) Lifting Lugs (ii) Earthing Terminals (iii) Drain Valve (iv) Conservator Oil (v) Filling Hole (vi) Dial Type OilTemp. (vii) Indicator Oil Level indicators (viii) Rating Plate (ix) Filter Valve (x) Silica Gel (xi) Dehydrating Breather (xii) Explosion Vents (xiii) Buchholz Relay with alarm & trip contacts (xiv) Air Release Plug (xv) Oil conservator with oil level gauge (xvi) Marshalling Box HV cable Box
Supplying and laying un-reinforced precast concrete cable cover, class HVP, type 1 with peak, size 300mm x 180mm x 40mm complete all as specified and directed.
M&L for Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 Sqmm complete all as specified and directed.
M&L for Switch air break, gang operated triple pole, mechanically operated, mounted on insulator and steel frame, with operating mechanism worked from ground level, for current rating upto 200 amps 11000 volts (12 Insulator) alongwith fuse system complete all as specified and as specified.
S & F for 80mm bore `Light grade` GI tubing ISI marked laid in trenches of fixed to walls / poles for protection of cable including removing old unserviceable GI pipes of any size complete all as specified and as directed.
Supply and laying in cable, XLPE insulated , screened, PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) 11000 Volts grade with stranded aluminium conductor of size 3 Core 95Sqmm, ISI marked complete, all as specified and as directed.
Excavation in trenches in soft/loose soil not exceeding 1.5 mtr in width and not exceeding 1.5 mtr in depth for laying of cables up to proper level complete all as specified and directed by Engr-in-charge.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed by Engr-in-charge.
Removing surplus exacavated material from excavation not exc 50 meter and depositing where directed at a level not exc 1.5 meter above the starting point complete all as specified and directed.
Sand cushioning to underground cables 8 cm below the cable before laying and 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I. Note :- 1. Dry fine sand of best available quality shall be used. 2. Punned thickness shall be measured and paid.
M&L for Construction of shed for suitable for 200 KVA (AVR) including steps,plinth protection,cable duct complete all as specified and directed as shown on drawing NO CESZ/TD-1110/2011 sheet 1/2 and 2/2 Dated 01/12/2011
M&L for Construction of shed for suitable for 160 KVA (AVR) including steps,plinth protection,cable duct complete all as specified and directed as shown on drawing NO CESZ/TD-1110/2011 sheet 1/2 and 2/2 Dated 01/12/2011
M&L for Construction of shed for suitable for 100 KVA (AVR) including steps,plinth protection,cable duct complete all as specified and directed as shown on drawing NO CESZ/TD-1110/2011 sheet 1/2 and 2/2 Dated 01/12/2011
M & L for Earthing complete with galvanised steel earth plate electrode 60x60cmx 6.3mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to copper strip 20x3mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate,with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4,funnel with wire gauge of (0.68) 8 mesh per liner inch,80mm thick RCC pit cover 320 mmx320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM,JALLI and charcoal dust and common salt all as shown in electrical plate No.3 of MES SSR Part-1 and specified including provision of earth wire protected by 40 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore medium graded GI pipe,and including all excavation and earth work & connecting the earthing to an earthing test point /transformer neutral/body/LT panel etc.and testing on completeion complete all as spec ified and directed. NOTE: The quoted rate of earthing shall be deemed to included cost of 7.5m long copper strip 20x3mm and protection pipe of 40 mm bore medium graded ,GI medium graded 20mm bore watering pipe
M/S KULBIR SINGH SODHI AND CO
SATISH AND CO
M/S Razdan Buildersand suppliers
M/S M.A. Construction
KR POWER INFRA INDIA PVT LTD.
CHINAR CONSTRUCTION TRADERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.24 MB
Tender43.pdf
Tender Documents • 1.11 MB
BOQ_618999.xls
BOQ • 1.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .