CONSTRUCTION OF ASSEMBLY AREA SHED AT NEW DAPPS AT PALAMPUR MIL STN

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, in any type of soil complete all as specified and directed.

M&L for plain cement concrete 1:4:8 (Nominal mix) type D-2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified and directed.

S&F for steel work in tubular trusses, posts for supports for truss including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161- 1979 grade St.-240 complete all as specified and directed.

M&L for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc., and similar small articles conforming to Fe-410W, Gde-E-250, complete all as specified and directed.

S&F mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other ends, or screwed both ends each screw to be fitted with washer and one hexagonal or square nuts, length of bolt not exceeding 5cms long, diameter of neck 16 to 20mm, complete all as specified and directed.

S&F for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet (Manglore Pattern) 0.50mm thick of an colour ( as approved by GE and Engineer in Charge) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour ( as approved by GE and Engineer in Charge) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preperation and applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface exc 10cm width or girth complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

M&L for hardcore broken stones or boulders of gauge exc 63mm but n exc. 100 mm,, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed.

M&L for 75mm thick PCC 1:2:4 (Nominal mix) type B-1 (using 20mm crushed stone aggregate) as in floor finishing even and smooth without using extra cement, complete all as specified and directed.

Supply only 38mm in width glass dividing strips, 4mm thick, inserted in position, conform to design complete all as specified and directed.

M&L coloured anti-skid outdoor full body vitrified tiles of size 600mm x 600mm x 15mm thick conforming to IS 4457:2007 as in parking/footpath fixed with spacers over 6mm thick high polymer modified grey cement based tiles adhesive and grouted with epoxy grout over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed. MAKE:- Johnson (Meteor series of Johnson Endura) or equivalent make of Somany / Kajaria / Orient Bell /Nitco

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement, complete all as specified and directed .

M&L for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed .

M&L for preperation of new plastered or unplastered surfaces of walls and applying three coats of white wash, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/floors/valley etc. including suitable clamps, bends, tee etc. as per site requirements complete all as specified and directed.

S&F 19mm thick plywood, grade BWP, type BB fixed with nuts and bolts to timber/MS frame work and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer, complete all as specified and directed.

M&L for plain cement concrete, M-15, type B-1, (using 20mm graded crushed stone aggregates) as in surface channels and drains, complete all as specified and directed .

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc, complete all as specified and directed.

M&L for plain cement concrete M-10 (Nominal mix) type C-1 using 20mm graded crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified & directed. Note:- The unit rate include for use of form work (straight or curved).

M&L for plain cement concrete 1:2:4, type B-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete , complete all as specified and directed.

Kesari Enterprises

BHARDWAJ BUILDERS

PrithviRaj Enterprises