KITFRA/WNH/2025-26/27

15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stackingmaterial within 50 metres lead.For thickness of tiles 10 mm to 25 mm

15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

15.57 Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by Engineer - in-Charge

10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

OD251020/2025-2026 Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete. 75mm overall thickness partition with 12.5 mm thick tapered edged moisture resistant Gypsum plaster board conforming to IS: 2095: (part I): 2011 (Board with BIS certification marks)

OD260124/2025-2026 Providing and fixing insulation with Resin Bonded Fibre glass wool conforming to IS : 8183, density 16 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags and held in position by crisscrossing GI wire etc complete as per directions of Engineer-incharge

OD251024/2025-2026 Supply & Fixing of Single glazed modular system consists of Aluminium section of 30x45x2mm thick along with Stick-on partition to make grid type pattern. All sections duly anodised up to 20-25 microns with 6063-T6 grade and required accessories i.e. glass to glass aluminium I/H sections, T section & 90 degree L sections & Glass packing to adjust the floor level. The inner grid section consists of Horizontal and vertical stick on section of size 30 mm (visible) x 6 mm making each grid of size 600mmx600mm. The outer Ceiling profile, Floor profile and wall profile are 30 mm visible face and 45 mm wide with 12 mm toughened glass & insertion of Thermoplastic gasket to adhere the glass firm & airtight. The sound reduction Value is from 32 to 35 Db. Finish: Black Anodized

OD258524/2025-2026 Supply & Installation of single glazed Sliding Stile Door having door frame profile of size of 75x40 with Single glazed along with Cover profile, Virgin grade duly Anodized Aluminium Door Sections having sizes of 75x30x1.5mm thick with 12 mm toughened Glass along with horizontal Stick on profiles of size 30mm(visible )x 6mm at an interval of 600mm . The door hardware consists of Direct ceiling mounted single leaf sliding door system ( max weight :140KG) for aluminium framed doors along with sliding door hook lock with 70mm double cylinder EPC , oval escutcheon , 22x300mm D type Handle, bottom guide & Gaskets Profile Finish: Black Anodised Hardware Finish : Black

OD258525/2025-2026 Supply & Installation of single glazed Stile Door having door frame profile of size of 75x40 mm, Single glazed door along with door clip for single action of door, Virgin grade duly Anodized Aluminium Door Sections having sizes of 75x30x1.5mm thick with 12 mm toughened Glass along with horizontal Stick on profiles of size 30mm(visible )x 6mm at an interval of 600mm including concealed Door Closer , 4nos Flush Hinges, 25x300mm offset D type handle along with narrow Stile dead lock, 70mm double cylinder EPC Half moon door stopper & Gaskets Profile Finish: Black Anodised, Hardware Finish : Black