Operation and Maintenance of Civil, Electrical Services (Internal and External) MEP Services such as Fire Fighting System, Sanitary Installations, WTP, STP, Horticulture Landscaping, facade cleaning, lifts, DG Sets, VRV Systems, CCTV, BMS, EPBAX, Horticulture Works and Housekeeping services, etc. at RITES Office Building at Action Area-1, New Town, 700 156

Name of Work: Operation and Maintenance works of RITES Office Building at Action Area-1, New Town, 700 156

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

1 Civil Maintenance work

Maintenance Service charges of works as per the below mentioned procedures as per the directions of Engineer In charge.

Periodical Maintenance of drainage network manually or using Pressure jetting machines twice in a year or more, if required, i/c desiliting of, gratings, chocked sewer

line, water closet including all the vertical stacks of Sanitary twice in a year or more, if required, to the entire satisfaction of Engineer - in -Charge.

b) Maintenance and cleaning of balcony and washroom and minor waterproofing works in the building etc.

Maintenance and operation of water supply grid and valves to keep the water supply system efficient and operational at all times to the entire satisfaction and as per

direction of the Engineer - in - Charge.

Maintenance and repairing of Stone cladding including joint filling, crack repairing and replacement of stone, Sculptures,damaged doors, windows, ventilators of steel,

d) aluminium, wood , PVC, Gypsuma and wooden False ceiling, trap doors i/c repair/ replacement of necessary fittings & fixtures of approved make (or orginal make as per

instruction of EIC) and quality, wherever required to keep them in proper functional conditions to the entire satisfaction of the Engineer - in - charge (EIC).

Maintenance and repair of plumbing system in all toilets and kitchen including stopping leakages or over flow of water ,cisterns and replacement of damaged fittings i/c

CP Brass fitting, ball cocks and G.I., PVC fittings sensor device, hand drier, soap dispenser, Mirror etc. to keep the entire water supply system efficient and functional to

the entire satisfaction of Engineer - in - charge . contractor shall replace all fittings which have lost its esthetic view, colour, polish as per orginal installment with approved

or original make as per instruction of EIC.

Maintenance and repair of internal & external plaster, repair and repaint of all area paints (external paint, textured paint, structural steel paint,) flooring, pavements,

pavor block masonry & RCC works, pointing on roof tiles , patch plaster and full plaster,CC gola i/c fixing of W.C. seat, gully trap, W.C trap, floor traps and sealing of

leakages from gully trap, W.C trap, floor trap, drainage and vertical stacks, expansion joints etc. and restoration of existing finishing in the affected areas to match with

adjacent finishes and to the entire satisfaction of Engineer -in - charge.

Welding by electric plant/Machine including transportation of electric welding plant at site to weld broken grills, hinges, doors, windows, gates, railing and any other steel

work etc.complete as per direction of Engineer -in - charge .

Investigating causes of seepage / dampness/ leakage from wall, floors, pipes expansion joints of all kinds etc., dismantling existing affected portion, arranging required

h) materials, labours, T&P, lift/ ladder or jhulla(if required) /stagging including taking all necessary measures, rectification complete in all respect in time bound manner to

the entire satisfaction of Engineer-in-charge.

i) Closing holes in walls, ceilings, floors or any wherelse including repairing with cement mortar to prevent entry of rats & others animals.

Recording & maintenance of the complaints register received at service centres in person or through telephone or email or any other mode or online complaint

monitoring system and assigning the complaint to the workers of respective trade.

Preparing the abstract of attended / unattended complaints on daily, weekly and monthly basis and submitting the same with reasons of unattended complaints and

action plan for redressal of pending complaint to the Engineer - in - charge of NSL or his authorized representative.

Weekly preventive maintenance shall be essentially carried out by deploying full team on Saturday and Sundays to check each & every civil , electrical, fire fighting, fire

alarm , items etc and maintained the record .

Any other works in connection with the smooth operation & maintenance work not mentioned above ,but required to be carried out within the cost and/or also as per

direction of the Engineer -in - charge .

n) Wall painting with plastic emulsion paint or existing paint of approved brand and manufacture to give an even shade:One or more coats on old work.

o) Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work.

Repairs to plaster of any thickness under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete,

including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

A Civil Manpower

Civil Providing services of carpenter/ mason for attending day to day

Manpower for complaints of carpentery/ masonery/ plumbering works and as

Day top Day per direction and to the entire satisfaction of Engineer-in-

Works charge. (Skilled for Working Days)

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Civil Providing services of plumber for attending day to day

Manpower for complaints of carpentery/ masonery/ plumbering works and as

Day top Day per direction and to the entire satisfaction of Engineer-in-

Works charge. (Skilled for Working Days)

Providing services of beldar to assist the

Civil masson/carpenter/plumber/Cleaning/Opening blocked Sewer

Manpower for Line Manhole, Gully Traps, Bath & Kitchen Traps. Drains and C.I

Day top Day Pipe Lines etc are miscelleneous civil Engineering works as per

Works direction and to the entire satisfaction of Engineer-in-

charge.(Unskilled for Working Days)

Total for Civil Manpower Cost 41,51,309.43

B Civil DSR items

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

(i) Dismantling

Disposal of moorum/building rubbish/ malba/ similar

unserviceable, dismantled or waste material by mechanical

transport including loading, transporting, unloading to approved

municipal dumping ground for lead upto 10 km for all lifts,

complete as per directions of Engineer-in-charge.

Note - item to be applicable in urban areas having directions for

restricted hours for movement/ plying of load carrying motor

vehicle of 3.5 cum or more.

(ii) Anti Termite Works -

Diluting and injecting chemical emulsion for POST-

CONSTRUCTIONAL anti-termite treatment (excluding the cost of

chemical emulsion) :

Treatment of existing masonry using chemical emulsion @ one

litre per hole at 300 mm interval including drilling holes at 45

B.3 2.35.4 degree and plugging them with cement mortar 1:2 (1 cement : 2 -

coarse sand) to the full depth of the hole :

With Chlorpyriphos/Lindane E.C. 20% with 1%

Treatment at points of contact of wood work by chemical

emulsion Chlorpyriphos/ Lindane (in oil or kerosene based

B.5 2.35.5 solution) @ 0.5 litres per hole by drilling 6 mm dia holes at Metre 50 279.70 13,985.00

downward angle of 45 degree at 150 mm centre to centre and

sealing the same.

(iii) Concrete Works 0 -

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

4.20 Providing and laying in position ready mixed or site

batched design mix cement concrete for plain cement concrete

work; using coarse aggregate and fine aggregate derived from

natural sources, Portland

Pozzolana/Ordinary Portland /Portland Slag cement, admixtures

in recommended proportions as per IS: 9103 to accelerate /

retard setting of concrete, to improve durability and workability

without impairing strength; including pumping of concrete to

site of laying, curing,

carriage for all leads; but excluding the cost of centering,

shuttering and finishing as per direction of the engineer-in-

charge; for the following grades of concrete.

Note: Extra cement up to 10% of the minimum specified cement

content in design mix shall be payable separately. In case the

cement content in design mix is more than 110% of the

minimum specified cement

content, the contractor shall have discretion to either re-design

the mix or bear the cost of extra cement.

B.7 4.20.2 All works above plinth and upto floor V level 0 -

Concrete of M15 grade with minimum cement

content of 240 kg /cum

(iv) Expansion Joint 0 -

Providing and fixing sheet covering over expansion joints with

B.9 5.29 iron screws 0 -

B.10 5.29.2 Aluminium fluted strips 3.15 mm thick. 0 -

B.12 (v) Cladding Works 0 -

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen

platforms, vanity counters, window sills, facias and similar

locations of required size, approved shade, colour and texture

laid over 20 mm thick base cement mortar 1:4 (1 cement : 4

coarse sand), joints treated with white cement, mixed with

matching pigment, epoxy touch ups, including rubbing, curing,

moulding and polishing to edges to give high gloss finish etc.

8.2.2 Granite stone slab colour black, Cherry/Ruby red

8.2.2.1 Area of slab upto 0.50 sqm

Providing and fixing machine cut, mirror/ eggshell polished ,

Marble stone work for wall lining (veneer work) including dado,

skirting, risers of steps etc., in required design and pattern

wherever required, stones of different finished surface texture,

on 12 mm (average) thick cement mortar 1:3 (1 cement : 3

coarse sand) laid and jointed with white cement slurry @ 3.3

kg/sqm including pointing with white cement slurry admixed

with pigment of matching shade, including rubbing, curing,

polishing etc. all complete as per Architectural drawings, and as

directed by the Engineer-in-Charge.

8.11.1 18 mm thick Italian Marble stone slab,Perlato, Rosso

verona, Fire Red or Dark Emperadore etc.

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Providing and fixing dry cladding upto 10 metre heights with

30mm thick gang saw cut stone with (machine cut edges) of

uniform colour and size upto 1mx1m, fixed to structural steel

frame work and/ or with the help of cramps, pins etc. and

sealing the joints with approved weather sealant as per

Architectural drawing and direction of Engineer-in-charge.

(The steel frame work, stainless steel cramps and pins etc. shall

be paid for separately).

B.17 8.20.2 White sand stone - 30mm thick gang saw cut stone Sqm 20 3040.10 60,802.00

B.18 (vi) Doors and Window and Wood Works 0 -

13.104 / Polishing on wood work with ready made wax polish of

13.104.1 approved brand and manufacture: Old work

Extra for providing frosted glass panes 4 mm thick instead of

ordinary float glass panes 4 mm thick in doors, windows and

clerestory window shutters. (Area of opening for glass panes

excluding portion inside rebate shall be measured).

Providing and fixing ISI marked aluminium butt hinges anodised

(anodic coating not less than grade AC 10 as per IS: 1868)

transparent or dyed to required colour or shade with necessary

screws etc. complete:

Providing and fixing aluminium sliding door bolts, ISI marked

anodised (anodic coating not less than grade AC 10 as per IS :

1868), transparent or dyed to required colour or shade, with

nuts and screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked,

anodised (anodic coating not less than grade AC 10 as per IS :

1868 ) transparent or dyed to required colour or shade, with

necessary screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised

(anodic coating not less than grade AC 10 as per IS : 1868)

transparent or dyed to required colour or shade, with necessary

screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI

marked, anodised (anodic coating not less than grade AC 10 as

per IS : 1868) transparent or dyed to required colour and shade,

with necessary screws etc. complete.

B.30 9.101.2 Twin rubber stopper Each 25 72.35 1,808.75

Providing and fixing aluminium casement stays, ISI marked,

anodised (anodic coating not less than grade AC 10 as per IS :

B.31 9.102 1868) transparent or dyed to required colour and shade, with Each 25 71.50 1,787.50

necessary screws etc.

Providing and fixing aluminium tee channels (heavy duty) with

rollers & stop end in pelmets as curtain rod.

B.33 (vii) GYPSUM BOARD PARTITIONS 0 -

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Providing and fixing partition upto ceiling height consisting of

G.I. frame and required board, including providing and fixing of

frame work made of special section power pressed/ roll form

G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive),

consisting of floor and ceiling channel 50mm wide having equal

flanges of 32 mm and 0.50 mm thick, fixed to the floor and

ceiling at the spacing of 610 mm centre to centre with dash

fastener of 12.5 mm dia meter 50 mm length or suitable anchor

fastener or metal screws with nylon plugs and the studs 48 mm

wide having one flange of 34 mm and other flange 36 mm and

0.50 mm thick fixed vertically within flanges of floor and ceiling

channel and placed at a spacing of 610 mm centre to centre by

6 mm dia bolts and nuts, including fixing of studs along both

ends of partition fixed flush to wall with suitable anchor

fastener or metal screws with nylon plugs at spacing of 450 mm

centre to centre, and fixing of boards to both side of frame work

by 25 mm long dry wall screws on studs, floor and ceiling

channels at the spacing of 300 mm centre to centre. The boards

are to be fixed to the frame work with joints staggered to avoid

through cracks, M.S. fixing channel of 99 mm width (0.9 mm

thick having two flanges of 9.5 mm each) to be provided at the

horizontal joints of two boards, fixed to the studs using metal to

metal flat head screws, including jointing and finishing to a flush

finish with recommended jointing compound, jointing tape,

angle beads at corners (25 mm x 25 mm x 0.5 mm), joint

finisher and two coats of primer suitable for board as per

75mm overall thickness partition with 12.5 mm thick double

B.35 9.105.2 skin tapered edged plain Gypsum plaster board conforming to Sqm 110 1818.15 1,99,996.50

IS: 2095: (part I): 2011 (Board with BIS certification marks)

Providing and fixing bright finished 100 mm mortice lock with 6

levers without pair of handles of approved quality for

aluminium door, with necessary screws etc complete as per

direction of Engineer- in-charge.

Providing and fixing powder coated telescopic drawer channels

B.37 9.115 300 mm long with necessary screws etc. complete as per One Set 15 414.20 6,213.00

directions of Engineerin-charge

Providing and fixing sliding arrangement in racks/

cupboards/cabinets shutter by with stainless steel rollers to run

B.38 9.116 inside C or E aluminium channel section (The payment of C or E Each 15 20.40 306.00

channel shall be made separately)

Providing and fixing stainless steel ( Grade 304) railing made of

Hollow tubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required)

and fitting the same with necessary stainless steel nuts and

bolts complete, i/c fixing the railing with necessary accessories

& stainless steel dash fasteners , stainless steel bolts etc., of

B.39 10.28 required size, on the top of the floor or the side of waist slab Kg 60 772.40 46,344.00

with suitable arrangement as per approval of Engineer-in

charge, (for payment purpose only weight of stainless steel

members shall be considered excluding fixing accessories such

as nuts, bolts, fasteners etc.).

Providing & fixing fly proof wire gauze to windows, clerestory

B.40 10.29 windows & doors with M.S. Flat 15x3 mm and nuts & bolts 0 -

Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm

aperture on both sides

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Providing & fixing glass panes with putty and glazing clips in

B.42 10.30 steel doors, windows, clerestory windows, all complete with : sqm 25 1064.65 26,616.25

B.43 (viii) Flooring 0 -

Dismantling-tile work in floors and roofs laid in cement mortar

B.44 including stacking material within 50 metres lead. For thickness sqm 75 73.40 5,505.00

of tiles 10 mm to 25 mm

Providing and laying Vitrified tiles in different sizes (thickness to

be specified by manufacturer), with water absorption less than

0.08% and conforming to I.S. 15622, of approved make, in all

colours & shade, in skirting, riser of steps, over 12 mm thick bed

of cement mortar 1:3 (1 cement. 3 coarse sand), jointing with

grey cement slurry @ 3.3 kg/ sqm including grouting the joint

with white cement & matching pigments etc. complete. Size of

Tile 600x600 mm

Chequerred precast cement concrete tiles 22 mm thick in

footpath & courtyard, jointed with neat cement slurry mixed

with pigment to match the shade of tiles, including rubbing and

cleaning etc. complete, on 20 mm thick bed of cement mortar

1:4 (1 cement: 4 coarse sand).

Medium shade pigment using 50% white cement 50% Grey

Tile work in skirting, risers of steps and dado up to 2 m height

over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse

sand) and jointed with grey cement slurry @ 3.3 kg/sqm,

including pointing in white cement mixed with pigment of

matching shade complete.

Marble tiles (polished) Raj Nagar

Marble stone flooring with 18 mm thick marble stone, as per

sample of marble approved by Engineer-in-charge, over 20 mm

(average) thick base of cement mortar 1:4 (1 cement : 4 coarse

sand) laid and jointed with grey cement slurry, including rubbing

and polishing complete with :

B.52 11.23.5 Udaipur green marble sqm 50 2428.60 1,21,430.00

25 mm wooden planking, tongued and grooved in flooring,

including fixing with iron screws complete with :

B.54 11.33.1 Second class teak wood sqm 15 4508.95 67,634.25

B.55 VITRIFIED FLOOR TILES 0 -

Providing and laying Vitrified tiles in floor in different sizes

(thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid

on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)

jointing with grey cement slurry @3.3 kg/sqm including

B.56 11.41A grouting the joints with white cement and matching pigments 0 -

etc. The tiles must be cut with the zero chipping diamond cutter

only . Laying of tiles will be done with the notch trowel, plier,

wedge, clips of required thickness, leveling system and rubber

mallet for placing the tiles gently and easily.

B.57 11.41A.2 Glazed vitrified floor tiles polished finish of size 0 -

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Grouting the joints of flooring tiles having joints of 3 mm width,

using epoxy grout mix of 0.70 kg of organic coated filler of

desired shade (0.10 kg of hardener and 0.20 kg of resin per kg),

including filling / grouting and finishing complete as per

direction of Engineer-in-charge.

Providing and laying machine cut, mirror polished, Italian

Marble stone flooring laid in required pattern in linear portion

of the building all complete as per architectural drawings, with

18 mm thick stone slab laid over 20 mm (average) thick base of

cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed

B.62 11.51 with white cement slurry @ 4.4 kg/sqm including pointing with 0 -

white cement slurry admixed with pigment to match the marble

shade including rubbing, curing and polishing etc. all complete

as specified and as directed by the Engineer-in-Charge.

18 mm thick Italian Marble stone slab, Perlato, Rosso verona,

Fire Red or Dark Emperadore etc.

Providing and laying Polished Granite stone flooring in required

design and patterns, in linear as well as curvilinear portions of

the building all complete as per the architectural drawings with

18 mm thick stone slab over 20 mm (average) thick base of

cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed

with cement slurry and pointing with white cement slurry

admixed with pigment of matching shade including rubbing,

curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge.

Polished Granite stone slab colour of Black, Cherry/Ruby Red or

Polished Granite stone slab of all colour and texture except

Black, Cherry/Ruby Red

B.67 (ix) Roofing Works 0 -

Providing and fixing M.S. holder bat clamps of approved design

to C.I. or S.C.I. rain water pipes embedded in and including

cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm nominal size)

and cost of cutting holes and making good the walls etc. :

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Providing and fixing false ceiling at all height including providing

and fixing of frame work made of special sections, power

pressed from M.S. sheets and galvanized with zinc coating of

120 gms/sqm (both side inclusive) as per IS : 277 and consisting

of angle cleats of size 25 mm wide x 1.6 mm thick with flanges

of 27 mm and 37mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long

with 6mm dia bolts, other flange of cleat fixed to the angle

hangers of 25x10x0.50 mm of required length with nuts & bolts

of required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the

spacing of 1200 mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of 10.5 mm, at 450 mm

centre to centre, shall be fixed in a direction perpendicular to

G.I. intermediate channel with connecting clips made out of

2.64 mm dia x 230 mm long G.I. wire at every junction, including

fixing perimeter channels 0.5 mm thick 27 mm high having

flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed

to wall/partition with the help of rawl plugs at 450 mm centre,

with 25mm long dry wall screws @ 230 mm interval, including

fixing of gypsum board to ceiling section and perimeter channel

with the help of dry wall screws of size 3.5 x 25 mm at 230 mm

c/c, including jointing and finishing to a flush finish of tapered

and square edges of the board with recommended jointing

compound , jointing tapes , finishing with jointing compound in

12.5 mm thick tapered edge gypsum plain board conforming to

IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing and fixing tiled false ceiling of specified materials of

size 595x595 mm in true horizontal level, suspended on inter

locking metal grid of hot dipped galvanized steel sections (

galvanized @ 120 grams/ sqm, both side inclusive) consisting of

main "T" runner with suitably spaced joints to get required

length and of size 24x38 mm made from 0.30 mm thick

(minimum) sheet, spaced at 1200 mm center to center and

cross "T" of size 24x25 mm made of 0.30 mm thick (minimum)

sheet, 1200 mm long spaced between main "T" at 600 mm

center to center to form a grid of 1200x600 mm and secondary

cross "T" of length 600 mm and size 24x25 mm made of 0.30

mm thick (minimum) sheet to be interlocked at middle of the

1200x600 mm panel to form grids of 600x600 mm and wall

angle of size 24x24x0.3 mm and laying false ceiling tiles of

approved texture in the grid including, required cutting/making,

opening for services like diffusers, grills, light fittings, fixtures,

smoke detectors etc. Main "T" runners to be suspended from

ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed

to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4

mm GI adjustable rods with galvanised butterfly level clips of

size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along

main T, bottom exposed width of 24 mm of all T-sections shall

be pre-painted with polyester paint, all complete for all heights

as per specifications, drawings and as directed by Engineer-in-

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

GI Metal Ceiling Lay in perforated Tegular edge global white

color tiles of size 595x595 mm and 0.5 mm thick with 8 mm

drop; made of GI sheet having galvanizing of 100 gms/sqm

(both sides inclusive) and 20% perforation area with 1.8 mm dia

holes and having NRC (Noise Reduction Coefficient ) of 0.5,

electro statically polyester powder coated of thickness 60

microns (minimum), including factory painted after bending and

perforation, and backed with a black Glass fiber acoustical

Providing & fixing false ceiling at all height including providing &

fixing of framework made of special section, power pressed

from M.S. sheets and galvanised with zinc coating of 120 gms/

sqm (both side inclusive) as per IS : 277 and consisting of angle

cleat of size 25mm wide x 1.6mm thick with flanges of 27mm

and 37mm, at 1200mm c/c, one flange fixed to the ceiling with

dash fastener 12.5mm dia x 50mm long with 6mm dia bolts,

other flange of cleat fixed to the angle hangers of 25 x10

x0.50mm of required length with nuts & bolts of required size

and other end of angle hanger fixed with intermediate G.I

chanels 45 x15 x 0.90mm running at the spacing of 1200 mm

c/c, to which the ceiling section 0.5mm thick bottom wedge of

80mm with tapered flanges of 26 mm each having lips of

10.5mm, at 450mm c/c, shall be fixed in a direction

perpendicular to G.I intermediate channel with connecting clip

made out of 2.64mm dia x 230mm long G.I wire at every

junction, including fixing perimeter channels 0.50mm thick

27mm high having flanges of 20mm and 30mm long, the

perimeter of ceiling fixed to wall/ partitions with the help of

Rawl plugs at 450mm centre, with 25mm long dry wall screws

@ 230mm interval, including fixing of Calcium Silicate Board to

ceiling section and perimeter channels with the help of dry wall

screws of size 3.5 x25mm at 230mm c/c, including jointing &

finishing to a flush finish of tapered and square edges of the

board with recommended jointing compounds, jointing

tapes,finishing with jointing compounds in three layers covering

8 mm thick Calcium Silicate Board made with Calcareous &

Siliceous materials reinforced with cellulose fiber manufactured

through autoclaving process.

B.76 (x) Finishing Works 0 -

B.77 13.1.1 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) sqm 110 347.05 38,175.50

15 mm cement plaster on the rough side of single or half brick

wall of mix 1:4 (1 cement: 4 fine sand)

Extra for plastering exterior walls of height more than 10 m

B.79 13.22 from ground level for every additional height of 3 m or part sqm 150 87.10 13,065.00

B.80 Interior Finishing 0 -

Providing and applying white cement based putty of average

thickness 1 mm, of approved brand and manufacturer, over the

plastered wall surface to prepare the surface even and smooth

B.82 Exterior Finishing 0 -

Finishing with Deluxe Multi surface paint system for interiors

and exteriors using Primer as per manufacturers specifications :

Two or more coats applied on walls @ 1.25 ltr/10 sqm over and

including one coat of Special primer applied @ 0.75 ltr /10 sqm

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Finishing with Epoxy paint (two or more coats) at all locations

prepared and applied as per manufacturer's specifications

including appropriate priming coat, preparation of surface, etc.

Painting with aluminium paint of approved brand and

manufacture to give an even shade .

B.88 13.63.1 Two or more coats on new work sqm 135 146.80 19,818.00

B.89 Finishing on Old Works 0 -

Removing white or colour wash by scrapping and sand papering

B.90 13.88 and preparing the surface smooth including necessary repairs to sqm 750 19.75 14,812.50

scratches etc. complete

B.91 13.87 White washing with lime to give an even shade : 0 -

B.92 13.87.1 old work (two or more coat) sqm 500 22.85 11,425.00

Removing dry or oil bound distemper, water proofing cement

paint and the like by scrapping, sand papering and preparing the

surface smooth including necessary repairs to scratches etc.

Distempering with 1st quality acrylic distemper, having VOC

B.94 13.81 (Volatile Organic Compound ) content less than 50 grams/ litre, 0 -

of approved brand and manufacture, including applying

additional coats wherever required, to achieve even shade and

B.95 13.81.1 old work (one or more coats) sqm 250 62.70 15,675.00

B.96 (xi) REPAIRS TO BUILDINGS 0 -

Repairs to plaster of thickness 12 mm to 20 mm in patches of

area 2.5 sq.meters and under, including cutting the patch in

B.97 14.1 proper shape, raking out joints and preparing and plastering the 0 -

surface of the walls complete, including disposal of rubbish to

the dumping ground, all complete as per direction of Engineer-

B.98 14.1.1 in-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand) sqm 100 547.40 54,740.00

B.99 14.1.2 With cement mortar 1:4 (1cement: 4 coarse sand) sqm 125 560.50 70,062.50

Renewing glass panes, with putty and nails wherever necessary

including racking out the old putty:

Float glass panes of nominal thickness 4 mm (weight not less

Pumping out water caused by springs, tidal or river seepage,

broken water mains or drains and the like.

B.103 (xii) MARKING ON PATHWAYS and BASEMENT 0 -

Providing and applying 2.5 mm thick road marking strips (retro

reflective) of specified shade/ colour using hot thermoplastic

material by fully/ semi automatic thermoplastic paint applicator

machine fitted with profile shoe, glass beads dispenser, propane

tank heater and profile shoe heater, driven by experienced

B.104 16.62 operator on road surface including cost of material, labour, sqm 125 747.80 93,475.00

T&P, cleaning the road surface of all dirt, seals, oil, grease and

foreign material etc. complete as per direction of Engineer-in-

charge and accordance with applicable specifications.

Providing, laying and making kerb channel 30 cm wide and 50

mm thick with cement concrete 1:3:6 (1 cement: 3 coarse

sand:6 graded stone aggregate 20 mm nominal size) over 75mm

bed of dry brick ballast 40 mm nominal size, well rammed and

consolidated and grouted with fine sand, including finishing the

top smooth etc. complete and as per direction of Engineer-in-

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Providing and laying 60mm thick faciory made cement concrete

interlocking paver block of M -30 grade made by block making

machine with strong vibratory compaction, of approved size,

design & shape, laid in required colour and pattern over and

including 50mm thick compacted bed of coarse sand, filling the

joints with line sand etc. all complete as per the direction of

Engineer-in-charge.

Providing and placing in position 100 mm thick factory made

machine batched & machine mixed Precast RCC Rectangular

Covers on drains of footpath of various sizes, of M-25 grade

cement concrete for RCC work, including cost of centering,

shuttering, reinforcement of 8 mm dia TMT bars of Fe 500

grade @ maximum 100mm c/c on both ways , neat cement

punning on finished surface, properly encased on all edges with

1.6 mm thick , 100 mm wide MS sheet duly painted over

priming coat , reinforcement to be welded at edges with MS

sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost

of cartage, all leads & lift, handling at site etc. all complete as

per direction of Engineer-in-Charge.

B.108 (xiii) Sanitary Works 0 -

Providing and fixing white vitreous china pedestal type

(European type/ wash down type) water closet pan.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube

upto 1 metre long with S.S. triangular plate to Eureopean type

W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing controlled flush, low level cistern made of

vitreous china with all fittings complete.

B.112 17.19.1 10 litre (full flush) capacity-white each 25 2243.75 56,093.75

Providing and fixing solid plastic seat with lid for pedestal type

17.20.1 White solid plastic seat with lid

Providing and fixing CP Brass 32mm size Bottle Trap of

B.114 17.22A approved quality & make and as per the direction of Engineer-in- each 100 1034.80 1,03,480.00

Providing and fixing G.I. inlet connection for flush pipe

connecting with W.C. pan.

Providing and fixing CP Brass Single lever telephonic wall mixer

B.116 17.22B of quality & make as approved by Engineer in charge. 25 6940.75 1,73,518.75

(a) 15 mm nominal dia

Providing and fixing P.V.C. waste pipe for sink or wash basin

including P.V.C. waste fittings complete.

B.118 17.28.2 Flexible pipe 0 -

Providing and fixing 100 mm sand cast Iron grating for gully

B.121 17.34 Providing and fixing toilet paper holder : 0 -

Providing and fixing M.S. holder-bat clamps of approved design

to Sand Cast iron/cast iron (spun) pipe embedded in and

including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1

B.123 17.37 cement : 2 coarse sand : 4 graded stone aggregate 20 mm 0 -

nominal size), including cost of cutting holes and making good

the walls etc. :

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Providing and fixing PTMT Waste Coupling for wash basin and

sink, of approved quality and colour.

17.69.1 Waste coupling 31 mm dia of 79 mm length and 62mm

breadth weighing not less than 45 gms

Providing and fixing white vitreous china battery based infrared

sensor operated urinal of approx. size 610 x 390 x 370 mm

having pre & post flushing with water (250 ml & 500 ml

B.127 17.80 consumption), having water inlet from back side, including each 3 7979.20 19,948.00

fixing to wall with suitable brackets all as per manufacturers

specification and direction of Engineer-in-charge.

Providing and fixing floor mounted, white vitreous china single

piece, double traps syphonic water closet of approved

brand/make, shape, size and pattern including integrated white

vitreous china cistern of capacity 10 litres with dual flushing

B.128 17.81 system, including all fittings and fixtures with seat cover, cistern each 2 18212.90 27,319.35

fittings, nuts, bolts and gasket etc including making connection

with the existing P/S trap, complete in all respect as per

directions of Engineer-in-Charge.

B.129 (xiv) Water Supply 0 -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including

B.130 18.7 CPVC plain & brass threaded fittings, i/c fixing the pipe with 0 -

clampsat 1.00 m spacing. This includes jointing of pipes &

fittings with onestep CPVC solvent cement and the cost of

cutting chases and making good the same including testing of

joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the

B.131 Exposed on Wall 0 -

B.132 18.7.2 20 mm nominal outer dia Pipes Metre 50 335.00 16,750.00

Pipes- Waste Waster pipe and Soil water pipe, Water supply

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including

all CPVC plain & brass threaded fittings, i/c fixing the pipe with

B.134 18.8 clamps at 1.00 m spacing. 0 -

This includes jointing of pipes & fittings with one step CPVC

solvent cement and the cost of cutting chases and making good

the same including testing of joints complete as per direction of

Engineer in Charge.

Concealed work including cutting chases and making good the

B.136 18.8.1 15mm nominal outer dia pipes Metre 42.5 497.8 21,156.50

B.137 18.8.2 20mm nominal outer dia pipes Metre 50 537.60 26,880.00

B.138 18.8.3 25mm nominal outer dia pipes Metre 15 627.25 9,408.75

B.139 18.8.4 32 mm nominal dia Pipes Metre 15 739.30 11,089.50

Providing and fixing brass stop cock of approved quality

Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end):

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Providing and fixing unplasticised P.V.C connection pipe with

PTMT Nuts coller and bush of approved quality and colour.

B.148 18.74.2 15mm nominal bore with 45cm length Each 44.5 121.90 5,424.55

Providing and fixing C.P. brass long nose bib cock of approved

quality conforming to IS standards and weighing not less than

Providing and fixing in position pre-cast R.C.C. manhole cover

B.151 19.19 and frame of required shape and approved quality 0 -

Circular shape 560 mm internal diameter

B.153 (xv) Aluminium Works 0 -

Providing and fixing aluminium work for doors, windows,

ventilators and partitions with extruded built up standard

tubular sections/ appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with

dash fasteners of required dia and size, including necessary

B.154 21.1 filling up the gaps at junctions, i.e. at top, bottom and sides with 0 -

required EPDM rubber/ neoprene gasket etc. Aluminium

sections shall be smooth, rust free, straight, mitred and jointed

mechanically wherever required including cleat angle,

Aluminium snap beading for glazing / paneling, C.P. brass /

stainless steel screws, all complete as per architectural drawings

B.155 21.1.1 For fixed portion 0 -

Anodised aluminium (anodised transparent or dyed to required

shade according to IS: 1868, Minimum anodic coating of grade

For shutters of doors, windows & ventilators including providing

and fixing hinges/ pivots and making provision for fixing of

fittings wherever required including the cost of EPDM rubber /

neoprene gasket required (Fittings shall be paid for separately)

Anodised aluminium (anodised transparent or dyed to required

B.158 21.1.2.1 shade according to IS: 1868, Minimum anodic coating of grade Kg 75 598.60 44,895.00

Providing and fixing glazing in aluminium door, window,

ventilator shutters and partitions etc. with EPDM rubber /

neoprene gasket etc. complete as per the architectural drawings

and the directions of engineer-in-charge . (Cost of aluminium

With float glass panes of 5 mm thickness (weight not

less than 12.50 kg/sqm)

Providing and fixing double action hydraulic floor spring of

approved brand and manufacture conforming to IS : 6315,

having brand logo embossed on the body / plate with double

spring mechanism and door weight upto 125 kg, for doors,

including cost of cutting floors, embedding in floors as required

and making good the same matching to the existing floor

With stainless steel cover plate minimum 1.25 mm thickness

Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto

1200mm length), fixed to roof slabs by means of ceiling cleats

made out of G.I. flat 40x3mm size 60 mm long and stainless

steel expandable dash fastener of 12.5 mm dia and 50 mm long,

Providing and fixing double glazed hermetically sealed glazing in

aluminium windows, ventilators and partition etc. with 6 mm

thick clear float glass both side, having 12 mm air gap, including

providing EPDM gasket, perforated aluminium spacers,

Providing and fixing stainless steel (SS 304 grade) adjustable

friction windows stays of approved quality with necessary

stainless steel screws etc. to the side hung windows as per

direction of Engineerin- charge complete.

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Providing and fixing aluminium tubular handle bar 32 mm outer

dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete

as per direction of Engineer-in-Charge.

Powder coated minimum thickness 50 micron aluminium

tubular handle bar

Filling the gap in between aluminium/ stone/ wood frame and

adjacent RCC/Brick/ Stone/ wood/ Ceramic/ Gypsum work by

providing weather/structural non sag elastomeric PU sealant

B.169 21.19 over backer rod of approved quality as per architectural 0 -

drawings and direction of Engineer-in-charge complete,

complying to ASTM C920, DIN 18540- F & ISO 11600

B.170 21.19.2 Upto 10 mm depth and 10 mm width Metre 125 200.95 25,118.75

B.171 (xvi) Waterproofing 0 -

Nozzle Insertion for Grouting :

Providing and inserting 12mm dia galvanised steel injection

nipple in honey comb area and along crack line including drilling

of holes of required diametre (20mm to 30mm) up to depth

from 30mm to 80mm at required spacing and making the hole

& crack dust free by blowing compressed air, sealing the

distance between injection nipple with adhesive chemical of

approved make and allow it to cure complete as per direction of

Engineer-In-Charge

Injection Grouting :

Providing and injecting approved grout in proportion

recommended by the manufacturer into cracks/honey-comb

B.173 26.35 area of concrete/masonry by suitable gun/pump at required 0 -

pressure including cutting of nipples after curing etc. complete

as per directions of Engineer-in-Charge.

Cementitious Grouting :

Stirrer mixed Acylic Polymer (of approved make @ 2% of weight

B.174 26.35.1 of Cement used) Modified Cement Slurry made with Non- kg 100 119.30 11,930.00

Shrink Compound in Concrete / RCC work.

Epoxy Grouting :

B.175 26.35.3 Epoxy injection grout in concrete/RCC work of approved make kg 175 553.40 96,845.00

Providing, mixing and applying bonding coat of approved

B.176 26.31 adhesive on chipped portion of RCC as per specifications and 0 -

direction of EngineerIn-charge complete in all respect.

SBR Based Cementitious Bond Coat :

SBR Polymer (@10% of cement weight) modified cementitious

B.177 26.31.1 bond coat @ 2.2 kg cement per sqm of surface area mixed with sqm 40 141.20 5,648.00

specified proportion of approved polymer

Epoxy Bond Coat :

B.178 26.31.2 Epoxy bonding adhesive having coverage 2.20 sqm/kg of sqm 60 285.20 17,112.00

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Providing & Applying polymer modified, flexible cementatious

negative side waterproofing coating with elastic waterproofing

polymers on interior wall plaster surface in three coats @14.35

kg /10 sqm. one coat of self priming of cementatious

waterproofing polymer(dilution with water in the ratio of 1:1)

and two coats of cementatious waterproofing polymer (dilution

with water in the ratio of 3:1 ) after scrapping and properly

cleaning the surface to remove pre-existing paint film & loose

particles till plaster is visible, complete in all respect as per the

direction of Engineer-in-Charge.

B.180 (xvii) Glasss Façade/ Glazing 0 -

Providing, assembling and supplying vision glass panels (IGUs)

comprising of hermetically-sealed 6-12- 6 mm insulated glass

(double glazed) vision panel units of size and shape as required

and specified, comprising of an outer heat strengthened float

glass 6mm thick, of approved colour and shade with reflective

soft coating on surface # 2 of approved colour and shade, an

inner Heat strengthned clear float glass 6mm thick, spacer tube

12mm wide, dessicants, including primary seal and secondary

seal (structural silicone sealant) etc. all complete for the

required performances, as per the Architectural drawings, as

per the approved shop drawings, as specified and as directed by

the Engineer-in-Charge. The IGUs shall be assembled in the

factory/ workshop of the glass processor. (Payment for fixing of

IGU Panels in the curtain glazing is included in cost of item

No.25.2) For payment, only the actual area of glass on face # 1

of the glass panels (excluding the areas of the grooves and

weather silicone sealant) provided and fixed in position, shall be

measured in sqm.

(i) Coloured tinted float glass 6mm thick substrate with

soft coating on face # 2, + 12mm Airgap + 6mm Heat

Strengthened clear Glass of approved make having properties

as visible Light transmittance (VLT) of 25 to 35 %, Light

reflection internal 10 to 15%, light reflection external 10 to 20

%, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/

m2 degree K etc. The properties of performance glass shall be

Providing and fixing double scaffolding system (cup lock type)

on the exterior side, up to seven story height made with 40 mm

dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes

joining with cup & lock system with M.S. tubes. M.S. tube

challies, M.S. clamps and M.S. staircase system in the

scaffolding for working platform etc. and maintaining it in a

serviceable condition for the required duration as approved and

removing it there after...

B.183 Total Amount for DSR Civil Works (In Rs.) 44,60,035.45

B.183 Total Amount for DSR Civil Works (In Rs.) 44,60,035.45

Total Civil DSR Cost after Labour cess Correction Factor

@0.973 on DSR Items as per CPWD circular

Welding by gas or electric plant including transportation of

plant at site etc complete.

Providing & fixing Control circuit sensor operating on 06 volts

B.186 MR dry battery Including taking out the same as per directions of each 25 3250.00 81,250.00

Engineer-in-charge.

Providing & fixing Solenoid Valve for Urinal sensor system

B.187 MR including taking out the same as per directions of Engineer-in- each 12.5 2540.00 31,750.00

Providing & fixing Battery Cover including taking out the same

as per directions of Engineer-in-charge.

Providing & fixing 06 volts dry battery (4x1.5 volts) as per

directions of Engineer-in-charge.

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Providing and fixing white vitreous china wash basin table top

B.190 MR round/ oval shaped including making all connections as per each 2.5 3420.00 8,550.00

directions of EIC.

The contractor shall supply and install a mirror with dimensions

of 1.50 meters in length and 0.6 meters in height. The mirror

must be manufactured from high-quality, distortion-free float

glass with a minimum thickness of 5 mm, ensuring durability

and clarity. Edges should be polished for safety and aesthetic

appeal. The mirror shall be securely mounted using corrosion-

resistant hardware, adhering to industry best practices and

safety standards. Installation must be completed in a manner

that ensures the mirror is firmly affixed, level, and free from any

visual defects. All materials, labor, tools, and equipment

necessary for the completion of this task are to be provided by

the contractor. The work must be executed in compliance with

relevant local regulations and within the stipulated project

The work involves the repair of an existing hand dryer, including

inspection, fault diagnosis, and replacement or rectification of

defective components such as heating elements, sensors,

motors, switches, or wiring as required. The job shall include

cleaning of internal parts, tightening of loose connections,

testing of electrical continuity and insulation resistance, and

reassembling the unit to ensure proper and safe operation. All

necessary materials, tools, labor, and minor accessories

required to complete the repair and restore the hand dryer to

full working condition shall be included in the scope of work.

Providing, fixing, jointing and testing in position of ISI marked

UV stabilized UPVC pipes for soil, waste, and vent, Type-B as

per IS : 13592 suitable for rubber ring joints, including all

neccessary specials and fittings (confirming to IS:14735) i.e.

bends, tees, junctions (with or without doors), reducers, WC

connectors, couplers, expansion joints / bellows, cowels,

clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor

level supported by clamp & hangers etc. in concealed / inside

duct / under floor & basement ceiling / external work etc.

including chase cutting as required, excavation and back filling

in all kind of soils, suspended from floor under false ceiling or

embedding the pipes laid under floors / building in 75 mm.

alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size) including cost of

shuttering for proper completion of the work, breaking and

making good the walls and floors etc. after pipes have been duly

laid and tested. The rubber ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps

with nuts, washers etc on 50x50x5 mm slotted angle. The cost

will include all support arrangements. The work includes

commissioning of all pipes lines as per drawings and

specifications and as directed by engg-in-charge at site.

B.195 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) Metre 90 422.00 37,980.00

B.196 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) Metre 45 292.00 13,140.00

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Providing, fixing, jointing and testing in position ISI marked

(IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for

waste pipe from fixtures to floor trap including reduces,

enlarger, socket, couplers, bends, tees etc including fixing at

wall/ ceiling level supported by clamp & hangers etc. cutting

holes in wall/ floors/ slabs and making good the same with

cement concrete 1:2:4 complete as required.

Total Amount for MR Civil Works (In Rs.) 3,14,367.50

Total Amount for MR Civil Works (In Rs.) 3,14,367.50

Total Amount for Civil Works (In Rs.) 88,05,291.42

Total Amount for Civil Works (In Rs.) 88,05,291.42

2 Electrical and Mechanical Maintenance work

Maintenance & repair of works as per the below mentioned procedures as per the directions of Engineer In charge.

All inclusive comprehensive maintenance , upkeep of all electrical internal installations, Lights, Fans, etc. as per details below for all days in a Smonth i/c holidays

a) complete with materials , consumables, bulb, tubes, LED lights (Except specialized lights/other special items) etc as per terms and conditions attached and as per direction

of Engineer -in-Charge.

• Light points/ Fan pts/ Ex-fan pts./ Call bell pts. • 5 amp plug points • 15 amp power plug points • Telephone outlet, TV Outlet • Telephone wire, TV Wire • Ceiling fans •

b) Ex-fans • Call bells • SP, SPN, TP & TPN MCB DB’s with MCB’s • Bus Bars, Bus duct • Cable trays of different size • 63 / 100 amps TP & N Switch units • 125 Amp. TP

MCCB’s • And others as desired by Engineer-in-charge.

One person will act as supervisor for carrying out O & M activities for above works & must have the knowledge of working with electricity.

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

A Electrical Manpower

Providing services of electrical works for attending day to day

A.1 complaints and as per direction and to the entire satisfaction of Months 36 40,409.83 14,54,753.74

Engineer-in-charge. (1 nos. Skilled for Working Days)

Electrical Providing services of beldar to assist the Electrician for all the

Manpower for electrical related works are miscelleneous Electrical Engineering

Day top Day works as per direction and to the entire satisfaction of Engineer-

Works in-charge.(Unskilled for Working Days)

Total Cost for Electrical Manpower 26,96,555.69

B Electrical DSR/ MR Items

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Wiring for light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable in surface / recessed medium class PVC

conduit, with modular switch, modular plate, suitable GI box

C the point with 1.5 sq.mm. FRLS PVC insulated

Wiring for group controlled (looped) light point/ fan point/call

bell point (without independent switch etc.) with

Group C FRLS PVC insulated copper conductor single core

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/

Supplyingmedium class

and fixing PVC conduit

following alongwith

modular switch/1socket

existing modular plate & switch box including connections but

5/6 modular plate etc. as required.

15/16 amp switch

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Telephone socket outlet Each

Supplying and fixing two module stepped type electronic fan

regulator on the existing modular plate switch box including

fixing modular

blanking etc.on

modular plate & switch box excluding modular

plate as required.

Supplying and fixing following size/module, GI box along with

Modular base & cover plate on existing modular

Moduleetc. as required.

SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire

with the following sizes of FR PVC insulated copper

X 1.5 sq. mm + 1core

X 1.5cable in surface/

sq. mm recessed medium class

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Installation, Testing and Commissioning of pre-wired,

fluorescent fitting / compact fluorescent/ LED fitting of all types,

complete with all accessories and tube/lamp

B.30 1.41 etc. directly on ceiling/ wall, including connections with 1.5 sq. Each 67 259.00 17,353.00

mm FRLS/HFFR PVC insulated, copper conductor, single core

cable and earthing etc. as required.

Installation, Testing and Commissioning of pre-wired,

fluorescent fitting / compact fluorescent/ LED fitting of all types,

complete with all accessories and tube/lamp

etc., including supplying and fixing ball and socket arrangement,

2 Nos. down rods of 20 mm dia X 1.6 mm thick steel conduit

upto 30 cm length, painting and wiring the down rods and

connections with 1.5 sq. mm FRLS/HFFR PVC insulated, copper

conductor, single core cable and earthing etc. as required.

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Installation, Testing and Commissioning of exhaust fan in the

existing opening, including making good the damage,

B.32 1.50 connection, testing, commissioning etc. as Each 17 556.00 9,452.00

1.50.1 Upto 450 mm sweep

Supplying and fixing single pole blanking plate in the existing

MCB DB complete etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,

"C" curve, miniature circuit breaker suitable for inductive load

Single pole poles in the existing MCB DB complete with

Supplying and fixing following rating, four pole, 415 volts,

isolator in the existing MCB DB complete with connections,

40 ampsand commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole

and neutral, sheet steel, MCB distribution board,

4 wayV,(4on surface/

+ 12), Doublerecess,

door complete with tinned copper

6 way (4 + 18), Double door TPN

8 way (4 + 24), Double door

Supplying and fixing following rating, double pole, (single phase

and neutral), 240 volts, residual current circuit breaker (RCCB),

25 ampsa sensitivity current upto 300 milliamperes in the

Supplying and fixing following modular switch / socket on the

existing modular plate & switch box including connections but

TV socket modular

outlet plate etc. as required.

20 mm PVC junction box, two way

Supplying and fixing of following sizes medium class PVC

conduit aong with accessories in surface/ recess including

cutting the wall and making good the same incase of recessed

Supplying and Installation of following size perforated of

painting with powder coating M.S. cable trays of perforation of

mm width x 50 mmin convinient sections,

depth x 2 mm joined with

Earthing with copper earth plate 600 mm X 600 mm X 3 mm

thick including accessories, and providing masonry enclosure

with cover plate having locking arrangement and watering

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Providing and fixing 25 mm X 5 mm copper strip on surface or in

recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in

recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess

for loop earthing as required.

8.5 LED Down lighter (COB Type) (System lumen efficacy ≥120

Supplying, Installation, Testing & Commissioning of LED

Recessed/surface Down lighter (Round /

square/ Rectangular) COB Type of following body material and 0

construction as per IS : 10322 with

driver as per the requirement with Driver efficiency >85%,

Operating voltage AC 140-270 Volt,

frequency 50/60 hz, Operating temp range -5 0C to 40 0C,

internal surge protection of 2.5 KV

LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120

Supplying, installation, Testing & Commissioning of Panel light

2x2 ft., of following body material and

construction as per IS : 10322 with driver as per the

requirement with Driver efficiency >85%, Operating

B.65 8.6 voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp 0 -

range -5 0C to 40 0C, internal

surge protection of 2.5 KV with Short & Open circuit protection,

UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be

below 5 %), life time (LED, Driver

& electrical circuitry), of minimum 50000 Burning Hours with,

LED Batten light (System lumen efficacy ≥105 <120 lm/Watt).

Supplying, Installation, Testing & Commissioning of LED surface

mounted Batten light of following body

material and construction as per IS : 10322 with driver

(Replaceable) as per the requirement with

Driver efficiency >85%, Operating voltage AC 140- 270 Volt,

frequency 50/60 hz, Operating temp range

B.68 8.9 -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & 0 -

Open circuit protection, THD < 10%, P.

F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5

%), life time (LED, Driver & electrical

circuitry), of minimum 50000 Burning Hours with 70% of initial

Lumen maintained till life

ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin),

SDCM(Standard Deviation Colour Matching) <3, Maximum

power consumption

Powder coated die cast /Extruded aluminium Body (Thickness >

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

LED Street light fixture, powder coated pressure

die cast aluminium body (System lumen efficacy

≥105 <120 lm/Watt)

Supplying, installation, Testing & Commissioning

of Street light LED fixture powder coated

B.71 8.12 pressure die cast aluminium body with driver as 0 -

per the requirement with Driver efficiency >85%,

Input voltage: 140-270 Volt AC, frequency 50/60 hz,

Operating temp range -5 0C to 50 0C, internal surge

protection of 5 KV L,N,E as per IEC 61000-4-5,

Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P.

Supplying and fixing of following ways surface/ recess mounting,

vertical type, 415 V, TPN MCB distribution board of sheet steel,

B.73 dust protected, duly powder painted, inclusive of 200 A tinned 0 -

copper bus bar, common neutral link, earth bar, din bar for

mounting MCBs (but without MCBs and incomer) as required.

8 way (4 + 24), Double door TPN

Supplying and drawing following size of FRLS PVC insulated

1.17 copper conductor, single core cable in the existing surface/

1X1.5 Sqmm Metre

2X2.5 Sqmm Metre

2x4.0 Sqmm Metre

2X 6.0 Sqmm Metre

Total Amount for DSR Electrical Works (In Rs.) 10,80,476.00

Total Amount for DSR Electrical Works (In Rs.) 10,80,476.00

Total Amount for Electrical Works (In Rs.) 37,77,031.69

Total Amount for Electrical Works (In Rs.) 37,77,031.69

3 Housekeeping Works

NDSR Maintenance & repair of works as per the below mentioned procedures as per the directions of Engineer In charge.

AMC of housekeeping, general up keep and cleaning of common areas (in working days excluding sundays and holidays Unskilled) including toilets, Offices, Cabins, Halls

washrooms, Corridor, Balcony, Staircases, Roofs, Basement at the premises to be carried out during normal working hours including providing all cleaning materials

a) required like soap, detergents, phenyle, chemical, dusters, dhoties, jharus, wipers, toilet cleaners, glass cleaning chemicals, R-2, R-6, cockroach killing sprays, room

fresheners etc and other cleaning materials, machinery & equipments required for housekeeping, Pest and rodent control services, fogging and Sanitization services as per

the direction of Engineer-Incharge of all area as per specifications and scope of work in the tender document.

S. NO. Unit DESCRIPTION OF WORK QTY Shift RATE PER MONTH AMOUNT PER MONTH

Housekeeping Supervisor 1 1 40,409.83 40,409.83

Housekeepers (unskilled) 2 1 34,494.50 68,989.00

Housekeepers (unskilled) 2 1 34,494.50 68,989.00

Housekeepers (unskilled) 2 1 34,494.50 68,989.00

Housekeepers (unskilled) 6 1 34,494.50 2,06,966.99

Housekeepers (unskilled) 4 1 34,494.50 1,37,977.99

Housekeepers (unskilled) 4 1 34,494.50 1,37,977.99

Housekeeping equipments Rental Charge 5,959.00 5,959.00

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Consumables for day to day operations such as Duster, Soap,

Dhoti and Chemicals, wiper, brooms, phenyl, and other cleaning

for Toilets (L.S.) as per Scope of Work and any material required 72,938.16 72,938.16

for housekeeping as per directions of EIC, As per actual on

production of invoice

Total Amount Per month for Housekeeping Works 8,09,196.96

Total Amount Per month for Housekeeping Works 8,09,196.96

Total Amount for Housekeeping Works (In Rs.) per month 36 8,09,196.96 2,91,31,090.50

Total Amount for Housekeeping Works (In Rs.) per month 36 8,09,196.96 2,91,31,090.50

4 Horticulture Works

NDSR Maintenance & repair of works as per the below mentioned procedures as per the directions of Engineer In charge.

Complete maintenance of the entire garden features of the garden area, indoor plants, seasonal plants, planted beds in general shift i/c lawn, tress, shrubs, hedge,

potted plants, flower beds, creepers etc. and other garden features including watering, hoeing, making of plants basin, manuring, trimming and cleaning of hedges/

plants beds, spraying of insecticides,DAP, fungicides, weeding, mowing and top dressing of lawn with good earth and Sludge Manure/Cow dung Manure For

a) premises/office accomodation (cum.) and hedge clipping and removal of the garden waste as per direction and satisfaction of the officer-in-charge (including the cost of

manure and good earth) to maintain the plants, hedge and lawns in good and healthy conditions at all the time during the maintenance period as mentioned in general

terms & conditions.The wastes to be dumped at authorised dumping ground outside the campus including transportation of garbage to the nearest municipal dumping

dhalao/yard/ treatment plant complete to keep the entire premises neat and clean.

Cost for 1 mali of Semi Skilled for Working Days (In Rs.) per month 36 37046.82 13,33,685.39

Cost for Horticulture Consumables

Supplying and stacking of good earth at site including

royalty and carriage upto 5 k m lead complete (earth

measured in stacks will be reduced by 20% for

Supplving and stacking of well decayed cattle manure

at site including royalty and carriage upto 5 k.m.lead

Complete (Cattle manure measured in stacks will

|reduced by 8% for Payment

Providing square Cement Concrete pots of specified

size, cast with cement concrete of nominal mix 1:2:4 (1

cement: 2 coarse sand: 4 graded stone aggregate 6|

mm nominal size), reinforced with 7 Nos ( 3 nos

horizontal & 4 nos vertical "U" shape) M.S. wires of 3.5

|mm dia as per design, including required form work,

|finishing with cement punning on exposed surface

curing for specified period and stacking in required

rows & height, all complete as per direction of Officer-in-charge

Top inside dia 30 cm, outer bottom dia 20 cm, total

height 30 cm with wall thickness of 25.4 mm

Providing and applying chemical fertilizers, including Urea (46%

N), Di-Ammonium Phosphate (DAP 18:46:0), and Muriate of

Potash (MOP 0:0:60), in suitable proportions to enrich soil

nutrient content and promote healthy growth of plants,

including loosening of the topsoil, uniform mixing and

incorporation of fertilizers around root zones or planting pits,

followed by light watering for proper absorption, complete with

cost of materials, labour, tools, and all incidental works as

directed by the Engineer-in-Charge.

6 MR Hiring Charges of equipments such as Trowel, Shovel, Pruning L.S. 36 2500.00 90,000.00

Saw, Hedge Shears, Secateurs, Fork, Lawnmower, etc.

Providing and displaying of Aglaonema Butterfly having

ht.30 crn 10 to 12 fresh, healthy and attractive colorful

7 3.1 leaves, well developed in 25 cm size Earthen Each 125 184.50 23,062.50

poVPlastic pot & as per direction of the officer-in

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Providing and displaying of Araucaria cookie having ht.

75 cm to 90 cm, straight, well developed, fresh and

8 3.14 healthy with lush green leaves from bottom to top in 25 Each 125 215.25 26,906.25

cm size of Earthen poUPlastic pot & as per direction of

the officer-in-charge.

Providing and displaying of Areca Palm having ht. 90

cm to 1.20 m with 4 to 5 suckers, well developed, fresh

9 3.18 and healthy with Ilush green foliage in 25 cm size of Each 125 157.85 19,731.25

Earthen po/Plastic pot & as per direction of the officer

|Providing and displaying of Croton Duck foot (Elite)

plant, having ht. 45 cm and above with 3 to 4 branches,

10 3.34 |well developed, fresh and healthy leaves in 25 cm size Each 125 122.75 15,343.75

of Earthen pot/Plastic pot. & as per direction of the

officer-in-charge

with full of fresh & healthy leaves in size

of 25 cm Top dia x 18 cm Bottom dia x 25 cm

Pornendicular height Earthen potPlastic pot & as per

direction of the officer-in-charge.

Providing and displaying of Philodendron Oxicodium

lGolden Colour Mounted on moss stick 90 cm ht.,

having 3 plants placed at equal distance, well

12 3.66 developed with full of fresh & healthy leaves in 25 cm Each 125 172.20 21,525.00

Top dia x 18 cm Bottom dia x 25 cm Perpendicular

height Earthen potPlastic pot & as per direction of the

officer-in-charge.

Providing and displaying of Raphis palm having ht. 75

cm to 90 cm with 12 to 15 equal suckers, well developed, full of

fresh & healthy leaves from bottom to

top in 25 cm size Earthen pot/Plastic pot & as per

direction of the officer-in-charge

Providing and displaying of Seaforthia Palm having ht.

14 3.18 90 cm to 1.20 m with 6-8 suckers, well developed, fresh Each 150 358.75 53,812.50

Jand healthy lush green leaves from bottom to top in 20

cm size of Earthen pot/Plastic pot & as per direction of

the officer-in-charge

Providing and displaying of Schefflera high colour

15 3.85 having ht. 25 cm to 30 cm, well developed with fresh & Each 100 41.00 4,100.00

|healthy foliage in 25 cm size of Earthen pot/Plastic pot

& as per direction of the officer-in-charge.

Providing and Displaying Chrysanthemum double

variety, well developed, having 45 to 60 cm ht., with 6

16 4.12 and above flowers with half blooming condition, fresh Each 184 118.90 21,877.60

and healthy with bamboo stacking in 25 cm Earthen Pot

and as per direction of the officer-in-charge.

Providing and Displaying Dahlia double kenya variety in

different colour well developed with 3 to 4 flowers in

half bloom, good foliage stacked with Green painted

Bamboo sticks, 45 to 60 cm height in 25 cm Earthen

Po Plastic Pot and as per direction of the officer-in

Providing and Displaying Marigold(Tagetes) inca hybrid

different colour having 30 cm and above ht., with 6 to 8

flowers in bloom & blooming condition, well developed

pot should be fully covered with fresh and healthy,

foliage and flowers in 20 cm Earthen Pot/Plastic Pot

and as per direction of the officer-in-charge.

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Providing and Displaying Petunia hybrid different colour

single wll developed in full bloom in 20 cm

Earthen/Plastic Pot and as per direction of the officer-in

Providing and Displayíng Poinsettia Dwarf variety

different colour well developed 23 to 30 cm ht., 3 to 4|

20 4.54 branch full bloom with fresh & healthy foliage in 15 cm Each 125 183.50 22,937.50

Earthen Po/Plastic Pot and as per direction of the

officer-in-charge.

Providing and Displaying Salvia red Hybrid dwarf

variety having 15 to 25 cm ht., well developed with fresh

& healthy foliage in full bloom in 20 cm Earthen pot

|/Plastic Pot and as per direction of the officer-in-charge.

Providing and Displaying Caladium Hybrid variety 3 to 4

in a pot well developed with fresh & healthy foliage 30

22 4.72 to 45 cm ht. in different colour 25 cm Earthen Each 125 64.60 8,075.00

PoUPlastic Pot and as per direction of the officer-in

Providing and Displaying Cosmos well developed fresh

& healthy 20 to 25 cm ht. attractive colors multi

23 4.74 branching at blooming stage in 20 cm Earthen Each 184 43.05 7,921.20

PoUPlastic Pot and as per direction of the officer-in

Providing and Displaying Gomphrena well developed

fresh & healthy 30 to 45 cm ht. bushy plant 15 & above

flower in 25 cm Earthen Pot/Plastic Pot and as per

direction of the officer-in-charge.

Providing and Displaying Kochia well developed fresh

healthy 20 to 25 Cm nt. lush green well shaped in 20

em Farthen Pot/Plastic Pot and as per direction of the

officer-in-charge

Providing and Displaying Portulaca hybrid in different

26 4.79 lcolour with bloom well developed fresh 8& healthy in 20 Each 150 86.10 12,915.00

lem Earthen PoUPlastic Pot and as per direction of the

officer-in-charge

Providing and Displaying Sunflower hybrid well

27 4.80 developed 15 to 20 cm ht. with fresh & healthy foliage Each 150 32.80 4,920.00

lat blooming stage in 20 cm Earthen Pot/Plastic Pot and

as per direction of the officer-in-charge.

Providing and Displaying Vinca different colour 6 to 8

well developed branch in full bloom stacked with green

painted Bamboo stick in 25 cm Eathen Pot/Plastic Pot

and as per direction of the officer-in-charge.

Providing and Displaying Zinnia hybrid double in

different colour well developed fresh & healthy 30 to 45|

cm ht. (3 to 4 in each pot) full bloom in 25 cm Earthen

PoUPlastic Pot and as per direction of the officer-in

Providing and stacking of plant Motia of height 25 to 30

30 4.87 cm.. 2 to 3 branch in earthen pots of size 20 cm Each 150 41.00 6,150.00

Earthen PotUPlastic Pot and as per direction of the

officer-in-charge.

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Bush Rose in different colour 2 to 3 healthy branch 30

31 4.90 cm and above ht. well developed with 8 or more flowers Each 150 25.65 3,847.50

| flower buds in 20 cmn Earthen pot /Plastic pot as per

direction of the officer-in-charge.

Providing and Displaying Bougainvillea named variety,

Sobhra, Thima, Marry palmar, Cherry Blossom etc. well

developed with fresh & healthy bushy in full bloom 75 to

90 cm ht. in 40 cm Cement Pot as per direction of the

officer-in-charge

Providing and Displaying Ficus nuda topiary well

developed with fresh & healthy foliage 45 to 60cm

spread 75 to 90 cm ht. bushy in 35 cm Cement Pot as

per direction of the officer-in-charge.

Removal of garden waste by TATA 407 or equivalent

civil dsr including loading/unloading and carriage upto 16 km

2023 |lead. Complete diposal upto designated place as per

direction of officer in charge

Supplying and stacking of Red Snowcem (25 Kg) Pack

civil dsr |of approved brand at site of work including carriage

2023 |loading unloading taxes ( as applicable if any) etc.

complete as per the direction of officer in charge.

Providing and displaying of fiber/plastic planter of size

14" in round/square shape as per sample approved

Providing and stacking of winter seasonal|

seedling/cutting at site of work well developed and

healthy free from disease in per tray and each trayl

|having 100 Nos plants as per direction of the officer-in

39 10.1.2 Antirrhinum dwarf Per Tray 4 600.00 2,400.00

40 10.1.11 Cineraria dwarf hybrid Per Tray 7 700.00 4,900.00

41 10.1.14 Dahlia double Per Tray 7 525.00 3,675.00

42 10.1.16 Dianthus hybrid Per Tray 7 500.00 3,500.00

43 10.1.17 Gazania hybrid Per Tray 5 500.00 2,500.00

44 10.1.25 Petunia hybrid Per Tray 7 600.00 4,200.00

45 10.1.24 Pansy Hybrid Per Tray 7 650.00 4,550.00

47 10.1.30 Stock double Per Tray 5 500.00 2,500.00

Providing and stacking of summer & rainy seasonal

48 10.2 seedling at site of work well developed and healthy free 0

|from disease in per tray and each tray having 100 Nos

plants as per direction of the officer-in-charge.

49 10.2.1 Balsam seedling Per Tray 5 500.00 2,500.00

50 10.2.3 Cosmos hybrid Per Tray 7 600.00 4,200.00

51 10.2.4 Gaillardia Double Per Tray 5 420.00 2,100.00

52 10.2.5 Gomphrena Per Tray 7 500.00 3,500.00

54 10.2.7 Portulaca hybrid Per Tray 7 420.00 2,940.00

55 10.2.8 Sunflower Dwarf Per Tray 7 500.00 3,500.00

56 10.2.9 Vinca Hybrid Per Tray 7 420.00 2,940.00

57 10.2.10 Zinnia hybrid Per Tray 7 420.00 2,940.00

Horticulture Consumables Cost (in Rs.) 12,72,125.80

Total Amount for Horticulture Works (In Rs.) 26,05,811.19

Total Amount for Horticulture Works (In Rs.) 26,05,811.19

5 Operation of Specialised E&M Equipments

a) NDSR-1 Overall Supervisor/ Maintenance Cum Safety Officer

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

The Overall Graduate Supervisor (Electrical/Mechanical) shall be responsible for supporting and overseeing the daily operation and maintenance of all building

electromechanical systems and other parameters, including HVAC, electrical distribution, plumbing, fire protection, lifts, and related equipment to ensure safe and

reliable. The supervisor shall coordinate and monitor preventive and corrective maintenance activities, maintain accurate documentation and reports, ensure compliance

with relevant codes, safety standards, and assist in supervising technicians, contractors, and service providers. The role also includes conducting routine inspections,

identifying system deficiencies, recommending improvements, and continuous-improvement initiatives to meet the operational requirements of the facility.

Overall Supervisor per month 36 59,590.00 21,45,240.00

a) NDSR-2 VRF System

Running, operation and preventive Maintenance of VRF System. Operator shall be responsible for the efficient, safe, and continuous operation of the building’s air-

conditioning systems, including indoor and outdoor units, controllers, refrigerant circuits, and associated electrical and mechanical components. The operator shall

monitor system performance, conduct routine inspections, and perform basic preventive and corrective maintenance to ensure optimal cooling levels. Responsibilities

include responding promptly to alarms or faults, coordinating with technicians and contractors for specialized repairs, maintaining accurate operational logs and

maintenance records, and ensuring compliance with manufacturer guidelines, safety procedures, and relevant standards to support reliable HVAC performance

throughout the facility.

a) NDSR-3 Fire Fighting System & Pump House

Running, operation and preventive Maintenance of water supply pumps, drainage pumps, fire fighting Pumps & other associtaed system as per specifications, scope,

terms & conditions defined in the tender documents including all the consumables required for day to day maintenance.

b) NDSR-4 Specialized Electrical Installation (ESS, HT, LT and DG Sets)

Round the clock Running operations and Annual maintenance (Routine & Preventive) of DG Sets complete with auto start panels and Substation i/c day to day cleaning &

keeping records etc. as per specifications, scope, terms & conditions defined in the tender documents including all the consumables required for day to day maintenance.

c) NDSR-5 Lifts

Providing services for running operations i/c cleaning, changing of floor mats of all lifts on quarterly basis, and safety, security, watch & ward of all the lifts on all days of

the year as per terms and conditions including SS Polishing of lifts, replacement of Fan, LEDs and Batteries

c) NDSR-6 BMS & CCTV Operator

The BMS and CCTV Operator shall be responsible for the continuous monitoring, control, and efficient operation of the building’s Building Management System (BMS) and

Closed-Circuit Television (CCTV) surveillance systems to ensure safety, security, and optimal facility performance. The operator shall observe system dashboards, alarms,

and camera feeds, promptly respond to faults or abnormal conditions, and coordinate with maintenance teams or security personnel as required. Duties include

conducting routine system checks, assisting in basic troubleshooting, maintaining accurate event logs and reports, and ensuring that all system operations comply with

relevant safety, security, and operational standards to support reliable building monitoring and control functions.

d) NDSR-7 Water Treatment Plant & Sewage Treatment Plant

Running, operation and preventive Maintenance services of water treatment plant, Sewage Treatment Plant as per specifications, scope, terms & conditions defined in the

tender documents including consumables.

Total for Operation of MEP Equipments and consumables 4,23,15,975.80

7 AMC/CAMC of Equipments

a) NDSR-1 CAMC of HVAC System

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Providing Comprehensive Maintenance of:-

VRF/VRV System (1220 HP)2/2.5/3/4 TR-357

AHU Units With 16.7/ 13/ 11 TR-6

Centrifugal Fans-2

Tube Axial Fans-2

Fresh Air Fans-2

Tube Axial Fresht Air-4

Vane Axial Exhaust Fans-2

Tube Axial Exhaust air Fan-2

Centrifugal Jet Fans-28

Vane Axial Fresh air Fan For Basement Ven la on-2

Tube Axial Fresh air Fan For Basement Ven la on-2

cabinet type centrifugal fans-2

The Comprehensive Annual Maintenance Contract (CAMC) for the VRF/VRV system shall cover the complete operation, maintenance, servicing, and performance

assurance of the building’s HVAC equipment, including the VRF System (total capacity 1220 HP with 2/2.5/3/4 TR indoor units), AHU units (16.7/13/11 TR), split air-

conditioners, air curtains, centrifugal fans, tube axial fans, fresh air fans, tube axial fresh air units, vane axial exhaust fans, tube axial exhaust air fans, centrifugal jet fans,

vane axial fresh air fans for basement ventilation, tube axial fresh air fans for basement ventilation, and cabinet-type centrifugal fans. The contractor shall be responsible

for routine inspections, preventive and corrective maintenance, cleaning, tightening, lubrication, refrigerant management, electrical and mechanical checks, performance

tuning, and timely replacement of worn-out parts as required. The contractor must ensure reliable, energy-efficient, and uninterrupted operation of all HVAC

components, respond promptly to breakdowns, maintain detailed service records, and comply with all relevant safety, quality, and manufacturer guidelines throughout

the CAMC period and no additional amount shall be paid for the said scope of work..

(Maintenance shall be carried out through OEM or its authorised vendor only)

CAMC of HVAC System per month 36 4,66,265.93 1,67,85,573.40

Total Amount for CAMC of HVAC for 3 years 1,67,85,573.40

Total Amount for CAMC of HVAC for 3 years 1,67,85,573.40

b) NDSR-2 CAMC of Lifts

Comprehensive Maintenance service of 8 Nos. of Johnson lifts & 1 nos. goods lifts installed in the premises. CAMC to be done thorugh OEM only and should be of top teir

offered by them and no additional amount shall be paid for the said scope of work beyond the .

CAMC of 15 Passenger Lift (L-Q5831 to 5838) i.e., 8 nos. lift

CAMC of Goods Lift (L-Q5839) per month 36 9,480.77 3,41,307.68

Total Amount for CAMC of lift for 3 years 44,73,898.02

Total Amount for CAMC of lift for 3 years 44,73,898.02

c) NDSR-3 CAMC DG Sets

Providing CAMC services as per terms and conditions, scope of work including B check as per the standard procedure of OEM/ Authorised vendor or as per direction of

Engineer-in -charge and no additional amount shall be paid for the said scope of work.

AMC of DG Sets (1 no. 500 KVA) per month 36 27502.77 9,90,099.77

AMC of DG Sets (2 no. 1010 KVA) per month 36 64614.43 23,26,119.49

Total Amount for 3 years 33,16,219.25

Total Amount for 3 years 33,16,219.25

d) NDSR-4 AMC of Sewage Treatment Plant (STP), Water Treatment Plant (WTP) & ROs

The routine maintenance of the STP, WTP, and RO systems shall include systematic inspection, cleaning, testing, and preventive servicing of all associated mechanical,

electrical, and process components to ensure continuous, safe, and compliant operation. The scope covers routine checks of pumps, blowers, motors, aeration systems,

diffusers, filtration units, RO membranes, chemical dosing systems, valves, tanks, sensors, and control panels. Maintenance activities shall include cleaning of tanks and

strainers, flushing and sanitizing RO membranes, monitoring and adjusting chemical dosing, calibrating instrumentation, checking for leaks or blockages, lubricating

mechanical parts, tightening connections, and ensuring proper functioning of all treatment stages. The contractor shall record operational parameters, report

abnormalities, replace minor consumables as required, and ensure that treated water quality meets prescribed environmental and regulatory standards while maintaining

reliable and efficient plant performance as per the standard procedure in scope of work or as per direction of Engineer-in -charge and no additional amount shall be paid

for the said scope of work..

AMC of STP and WTP per 4 Months 9 192177.75 17,29,599.75

AMC of STP, WTP & ROs for 3 years 17,29,599.75

f) NDSR-5 Transformer, HT and LT Panels

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Providing AMC services as per terms and conditions, scope of work. The routine service for the Transformer, HT Panels, and LT Panels shall include comprehensive

inspection, testing, cleaning, and preventive maintenance to ensure safe, reliable, and efficient electrical distribution across the facility. Scope of work includes checking

transformer oil level and condition, inspecting bushings, cooling systems, earthing connections, and identifying signs of overheating or leakage. For HT and LT panels,

routine service shall involve tightening of terminations, cleaning of busbars and insulators, verification of protection relays, functional testing of breakers, switches, and

metering devices, inspection of cable terminations, and ensuring proper operation of safety interlocks. The contractor shall record all test results, correct abnormalities,

replace worn-out components as required, and ensure compliance with electrical safety standards and manufacturer guidelines, thereby maintaining continuous and

trouble-free electrical system performance as per the standard procedure of Authorised vendor or as per direction of Engineer-in -charge and no additional amount shall

be paid for the said scope of work..

AMC for Transformer, HT and LT Panels and other Panels per 6 Months 6 3,18,310.41 19,09,862.48

Total AMC Cost for Transformer, HT and LT Panels for 3 years 19,09,862.48

f) NDSR-6 Fire Fighting System

The routine maintenance of the fire fighting system, including fire alarm, public address (PA), sprinkler systems, control panels, and fire pumps, shall involve

comprehensive inspection, functional testing, cleaning, and preventive servicing to ensure full operational readiness at all times. The scope includes checking sprinkler

heads, valves, hydrants, hose reels, and piping for leaks, corrosion, or obstruction; verifying the performance of fire pumps—including jockey, main, and standby

pumps—through weekly and monthly run tests; and inspecting pump controllers, pressure switches, and electrical connections. For the fire alarm and PA systems,

maintenance shall include testing smoke and heat detectors, manual call points, sounders, strobes, PA speakers, and control panels for proper functionality,

communication, and fault-free operation. The contractor shall document all test results, rectify identified defects, replace worn-out consumables as needed, and ensure

full compliance with local fire authority regulations, and manufacturer guidelines to maintain the building’s fire safety systems in reliable and ready condition. This rate is

inclusive of filling of extinguishers every year. The maintenance should be as per the standard procedure of scope of work or as per direction of Engineer-in -charge within

their quoted rates and no additional amount shall be paid for the said scope of work.

Fire fighting system i.e., Fire Alarm System, Panels:

Micro processor based intelligent addressable main fire alarm panel(10 loop panel) - 2 Set (Edwards),Repeater panel - 6 set,Multicriteria Detectors -1256 nos.

Public Addressing System- 6 zone, voice alarm controller - 2 set , Speakers - 186 nos., Amplifier - 600 Watt - 2 set.HP Computer with printer - 2 Set.

Includes repair/ replacement of smoke detectors, sprinklers. Includes repair of speaker, fire alarm panels, detectors, etc.

Fire Fighting Pumps (hydrant pump, sprinkler and Jockey Pumps):

Hydrant service Main Pump ,Flow Rate-2850 LPM , Head-105m - 1 nos. ,Sprinkler Pump - Flow Rate-2850 LPM , Head-105m - 1 nos.,Jockey Pump- Flow Rate-180 LPM ,

Head-105m -2 nos., Lab terrace pump Flow Rate-900 LPM , Head-32m -1 nos.,Curtain Pump Flow Rate-780 LPM , Head-50m - 1 nos. ,Main building Terrace Pump - 2nos.,

Diesel Engine driven Fire Pump - 2850LPM-1 nos.

Refilling of Fire Extinguishers:

CO2 type Extinguisher of 4.5 Kg - 63 nos.,Water - CO2 type Extinguisher - Cap - 9 litres - 2set,Wet Chemical Fire Extinguisher - Cap - 6 kg - 5 nos.,ABC Powder (stored

Pressure type)- 6.0kg - 196 nos.

To be filled once in a year

AMC for Fire Fighting System per Month 36 57,938.00 20,85,768.00

Total for Fire Fighting System for 3 years 20,85,768.00

f) NDSR-7 Pumps (Both drainage and Supply)

The routine maintenance of supply and drainage pumps shall include thorough inspection, cleaning, testing, and preventive servicing to ensure reliable and efficient fluid

transfer and drainage operations. The scope covers checking pump performance parameters, inspecting motor and coupling alignment, tightening electrical and

mechanical connections, lubricating bearings, cleaning strainers and foot valves, and verifying the condition of impellers, seals, and gaskets. Maintenance activities also

include testing float switches and level sensors, ensuring proper operation of control panels, checking for leaks, vibrations, or abnormal noise, and verifying the integrity of

suction and discharge pipelines. The contractor shall document all observations, rectify minor faults, replace worn-out consumables as required, and ensure uninterrupted

and safe functioning of all supply and drainage pumps in accordance with manufacturer guidelines and applicable standards. The cost is inclusive of comprehensive

maintenance of pumps and all necessary items to be replaced shall be under the scope of contractor within their quoted rates. The maintenance should be as per the

standard procedure of scope of work or as per direction of Engineer-in -charge within their quoted rates and no additional amount shall be paid for the said scope of work.

AMC for both drainage and supply pumps per Month 36 19,666.67 7,08,000.00

Total fordrainage and supply pumps for 3 years 7,08,000.00

f) NDSR-8 UPS

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

The routine maintenance of the UPS system (for 20 KVA, 10 KVA and 3 KVA shall include comprehensive inspection, testing, and preventive servicing to ensure

continuous, stable, and interruption-free power supply to critical equipment. The scope covers checking the UPS modules, battery banks, rectifier, inverter, static bypass,

cooling systems, and all electrical connections for proper operation. Maintenance activities include verifying input/output voltage and current parameters, testing battery

health through load tests, measuring cell voltages and specific gravity (where applicable), cleaning terminals, tightening connections, inspecting ventilation pathways, and

ensuring proper functioning of monitoring and alarm circuits. The contractor shall record all test results, identify and rectify abnormalities, replace weak or damaged

battery cells or consumables as required, and ensure full compliance with manufacturer guidelines to maintain optimal reliability and efficiency of the UPS system. The

cost is inclusive of all consumable items which needs to be replaced for running and operation of UPS. The maintenance should be as per the standard procedure of

Authorised vendor or as per direction of Engineer-in -charge within their quoted rates and no additional amount shall be paid for the said scope of work.

AMC for UPS Panels per Month 36 1,22,695.91 44,17,052.70

Battery Replacement Cost (for 20 KVA, 10 KVA and 3 KVA) Nos. 85 4,720.00 4,01,200.00

Total for AMC of UPS for 3 years 48,18,252.70

f) NDSR-9 Solar Panel

The routine maintenance of the 130 kW solar panel system shall include comprehensive inspection, cleaning, testing, and preventive servicing to ensure optimal energy

generation and long-term operational reliability. The scope includes regular cleaning of solar modules to prevent dust buildup, visual inspection for cracks, hotspots, or

shading issues, and checking mounting structures for corrosion, tightness, and structural integrity. Maintenance activities also cover inspection and testing of DC/AC

cables, connectors, junction boxes, inverters, surge protection devices, and earthing systems to ensure safe and efficient operation. The contractor shall monitor system

performance, verify inverter output parameters, record generation data, promptly identify abnormalities, and replace minor consumables as required, ensuring full

compliance with safety standards and manufacturer/ Authorised Vendor's guidelines for sustained efficiency of the solar power system. The maintenance should be as per

the standard procedure of Authorised vendor or as per direction of Engineer-in -charge within their quoted rates and no additional amount shall be paid for the said scope

AMC for Solar Panels per 3 Months 12 76,700.00 9,20,400.00

Total for AMC of Solar Panel for 3 years 9,20,400.00

f) NDSR-10 CCTV and EPBAX Systems

The scope of work under this BOQ includes providing comprehensive Annual Maintenance Contract (AMC) services for the existing EPABX and CCTV systems installed at

the premises. The AMC shall cover preventive and corrective maintenance of all EPABX components, including the main control unit, extension lines, intercom

instruments, and associated power supplies, as well as all CCTV equipment such as cameras, NVR/DVR units, storage devices, monitors, network components, and cabling

infrastructure. The contractor shall conduct periodic inspections, cleaning, testing, and performance checks, ensuring optimal system functionality with minimal

downtime. All labour, tools, technical support, and all the repairs are to be included. The vendor must maintain service logs and provide timely on-call support throughout

the contract period. The maintenance should be as per the standard procedure of Authorised vendor or as per direction of Engineer-in -charge within their quoted rates

and no additional amount shall be paid for the said scope of work.

AMC for CCTV Systems and EPBAX per Month 36 1,27,034.74 45,73,250.78

Total for AMC of CCTV Systems and EPBAX for 3 years 45,73,250.78

f) NDSR-11 Building Management System

The scope of work under this BOQ includes providing a Comprehensive Annual Maintenance Contract (CAMC) for the Building Management System (BMS) installed at the

premises. The CAMC shall cover complete preventive and corrective maintenance of all BMS components, including controllers, sensors, field devices, workstations,

networking hardware, software interfaces, communication modules, and all associated control panels. The contractor shall ensure continuous system optimization

through periodic inspections, calibration of sensors, health checks of automation equipment, software updates, data backup verification, and real-time monitoring support

as required. The CAMC shall include all labour, tools, technical expertise, firmware/software maintenance, and replacement of defective components to ensure 100%

operational efficiency of the BMS. The vendor shall maintain detailed service records, provide timely on-call support, and ensure minimal system downtime throughout

the contract period.

CAMC for BMS for 1st Year per Month 12 66,194.56 7,94,334.70

CAMC for BMS for 2nd Year per Month 12 73,549.51 8,82,594.11

CAMC for BMS for 3rd Year per Month 12 81,721.68 9,80,660.13

Total forCAMC for BMS for 3 years 26,57,588.94

Total cost for AMC/ CAMC of Equipment's 4,39,78,413.31

8 Miscallaneous works

a) NDSR-1 Cleaning of Rats and Rodent Control, Pest Control and Fogging/ Sanitation Works

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

The contractor shall provide rats and rodent control, pest control, fogging, and sanitation services as per Indian Standard norms (including IS 14489:2018 and relevant

CPCB and MoHFW guidelines) and it shall include the supply of all materials, labour, equipment, and supervision necessary to execute integrated pest management on a

scheduled basis throughout the premises. The scope of work includes: (a) Rats and rodent control through mechanical traps, bait stations, glue boards, and approved

rodenticides (such as Bromadiolone or Zinc Phosphide) applied in accordance with manufacturer instructions and BIS safety standards, conducted in vulnerable areas like

basements, godowns, kitchens, and service ducts; (b) General pest control covering cockroaches, ants, flies, mosquitoes, and crawling insects using WHO-approved

residual insecticides such as cypermethrin, deltamethrin, or chlorpyrifos emulsions, applied via misting and surface spraying across all building common area; (c) Fogging

operations using thermal or cold foggers with pyrethroid-based fogging solution carried out in open areas, drainage zones, and garbage yards during monsoon months

and fortnightly otherwise, ensuring compliance with local pollution and health safety norms; and (d) Sanitation and disinfection using sodium hypochlorite (1%) or

quaternary ammonium compound-based disinfectants on common touch points, restrooms, and corridors weekly and during special circumstances like outbreaks. The

BOQ shall include itemized cost heads for labour deployment, chemical supply, machinery and PPE usage, record maintenance, waste disposal of pest residues, and

periodic monitoring reports, with all work executed under supervision of a certified pest control operator registered under the Insecticides Act, 1968, adhering to

environmental, health, and safety standards as per Indian norms or as per directions of EIC.

Sl. No. NDSR Description Rates Quantity Frequency Amount

1 MR Rats and rodent control (Once in each month) 3.21 10,264.00 36.00 11,84,608.39

General Pest Control (Liquid Spray + Gel Application) for

insecticides, flies, etc. (L.S.) (Once in 2 months)

3 MR Fogging and Sanitization (Once in each month) 9.62 10,264.00 36.00 35,53,825.18

Total Amount for Sanitation Works (as above) 3 years 53,30,737.77

Total Amount for Sanitation Works (as above) 3 years 53,30,737.77

b) NDSR-2 Façade Cleaning

Mechanized Cleaning of the Outer Façade Glasses/ ACP Sheets by applying chemicals and other materials etc. at any height including scaffolding/ Craddle (if required)

/Jhula and silicon filling wherever necessary as per direction of Engineer-in-charge. Nothing extra shall be paid for any kind of arrangements or what so ever.

Quantity Frequency Cost per Sqm Amount

5,500 Sqm (Once

MR Glass Cleaning (Cleaning once in 2 months) cleaning in every 2 18 38.47 38,08,659.10

5,500 Sqm (Once

MR ACP Sheet Cleaning (Cleaning once in 2 months) cleaning in every 2 18 51.30 50,78,212.13

Cleaning the sand stone surface and removing dirt, dust, bird

dropping,grease, oil, algae, fungus, monkey beats, vegetable

growth etc.,including providing, applying and washing the

surface with liquid Ammonia Chemical of 5% solution and other

chemical cleaning agent as approved by Archaeological Survey

of India/ Engineer-in-charge, of approved brand and

manufacturer, with the help of required scrubbers and also

cleaning with machine operated water jet mixed with desired

quantity of fine silica where ever required, without causing any 400

scratching/ damage to the stone surface and finally washing the (Once in a year)

surface with clean water with the help of pressure jet machine,

complete in all respect, including taking all precautions to

safeguard ventilators, windows, doors etc. by suitable covering

so as to avoid any damage to the building/structure, all as per

direction of Engineer- in-charge (The rate is inclusive of all

materials & labours involved except scaffolding).

Total Amount for 3 years 91,40,131.22

Total Amount for 3 years 91,40,131.22

b) 14.75A Cleaning of water tanks

Digitally signed by AMIT

BILL OF QUANTITIES

S.No. DSR/NDSR Description of item/work Unit Qty. Rate in Rs. Amount in Rs.

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the

tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of

tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be

removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during

cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Frequency Cost per Ltr. Amount

Water Tank Cleaning (Cleaning once in 6 months) 10,000 6 0.50 30,000.00

Total Amount for Water Tank Cleaning in 3 years 30,000.00

Total Amount for Water Tank Cleaning in 3 years 30,000.00

b) 14.78 Cleaning of under ground sump, Over Head R.C.C.Tank

Cleaning of under ground sump, Over Head R.C.C.Tank ( independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning

shall consist following operations:-

(i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.

(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.

(iii) Chlorination of RCC internal surface by liquid chlorine.

(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.

(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.

Frequency Cost per Sqm Amount

Cleaning of Under ground sump, Over Head R.C.C.Tank

(Cleaning once in 6 months)

Total Amount for Under ground sump, Over Head R.C.C.Tank

Total Amount for Under ground sump, Over Head R.C.C.Tank

b) 14.77 Cleaning of Sewer Line

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having

4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes

and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm

Frequency Cost per Sqm Amount

Cleaning of Sewer Line (Cleaning Once in a Year) 500 3 340.75 5,11,125.00

Total Amount for Sewer Line in 3 years 5,11,125.00

Total Amount for Sewer Line in 3 years 5,11,125.00

Total Amount of Miscallaneous Works (In Rs.) 1,55,80,102.79

Total Amount of Miscallaneous Works (In Rs.) 1,55,80,102.79

a) NDSR Prime Cost

Prime cost has been taken for reimbursement of expediture as per requirement of site/or instructions given by client/ or as per direction of Engineer-in-charge. In case,

any item needs to be executed for work not mentioned in scope of work but is important for operation and maintenance of site, in such case, contractor shall be paid as

per DSR rates (on which discount shall be applicable) or prevailing market rate which shall be paid as per actuals. Further, any deviation in quantity for the above said

items shall be taken from this head. The contractor has to purchase the items with prior approval of RITES and/ or Enginner Incharge on most competative rates from

Total Amount Prime Cost (In Rs.) 99,17,731.00

Total Amount Prime Cost (In Rs.) 99,17,731.00

Grand Total (In RS.) 15,61,11,448.00

Grand Total (In RS.) 15,61,11,448.00

Digitally signed by AMIT