Conversion of Hand Pump to Mini Power Pump,Sintex Tank Stage and Pipe Line Work at Ward No.03 Koolagoundanur Main Road Bazaar Main 1st Street Ram Singh Kattu street in Pugalur Municipality, Karur District

Amount

Removal of deep well hand pumps from borewell Above 40 M TWAD 2022-23 Item (15 E II Page 203)

Rate for flushing of borewell of 6" dia requiring less than4 hours operation using drill rods/ hose with requiredsize of pipes for various capacity compressor including transportation, labour, and fuel charges for compressorsas directed by the TWAD Officer and conducting yieldtest by 'V' notch method if required.(600 Cfm ( 100 /150 PSI)/1 Hour) TWAD 2024-25 Item 18 D I Page 206

Supply and delivery of 2 HP (15 lpm x 60 m ) 1 phase submersible pumpset suitable for 150mm dia borewell of accessories as per standard specifications. TWAD 2024-25 Item No 2.0. Page No 101 .Single Phase Submersible Pumpset As Per IS 8034/2002 Without Panel Board

Supply and delivery of 2 HP I-Phase panel board D.O.L.with two level guard and auto start as per standard specifications. TWAD 2024-25 Item No 11.0 Page No 119

Supply and delivery of (40 mm ) UPVC and PVC Pipe including cost, conveyance labour charges for erection etc., complete.(inside the bore) SOR 2024-25 ,M-1087 P.No 157

UPVC Pipe 40 mm (Schedule-40) M-M-1087

PVC 40 mm (11/2") (IX PART "I")M-1650

Supply and delivery of (32mm) UPVC & PVC and CPVC Pipe including cost, conveyance labour charges for erection etc., complete.(inside the bore) SOR 2023-24

UPVC Pipe 32 mm M-1086 P.No 157

PVC 32 mm M-0877 P.No 147

PVC20 mm M-0875 P.No 146

Supply and delivery of 4sqmm. cable PVC insulated and sheathed 3 core flat type copper cable confirming to IS 694/1990 including labour charges etc., complete and as directed by the departmental officers.TWAD 2024-25 Item No 12.10 Pg-124.

Labour charges for the erection of Submersible / Open well including fixing of suction pipe and foot valve upto a maximum depth of 7 meters and delivery pipes to the required length with valves, pressure guages upto the exterior wall of pump room and erection of panel board consisting of TPIC switches starter, Voltmeter, Ammeter , Capacitor single phasing preventor and laying and jointing the cables and Twin earthing as per IE rules including providing bed blocks etc., complete and operating the pumps and trial run for 10 days including signing of completion of reports as required by EB authories. (TWAD SOR 2024-25. Page No 204 , SI No-17c WD-W0871) upto 5 HP Submersible pumpset

Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete as per standard specifications.

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supply and Fixing Of Rcc Rings Including all labour and transport Chargrs complted etc.(As Per Quatation)

Ring (5 Feet Dia)

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supply, delivery and fixing of 2000,500 litres of HDPE tank as per IS 1270/1996 including loading unloading, transportation and labour charges for fixing of the G.I.pipes and specials for pipe connection works including cutting, threading and fixing charges etc., complete as per standard specifcations. TWAD 2024-25 Item 17.0 Page 87

2000 litres

Supply and run of 4x6 sq.mm (84/0.3) PVC insulated SC unsheathe`d Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains.(SD 68)

Supply and fixng of TNEB Moter Board suitable for 3 Phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 63A fuse units (500V) 1 No. Neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete. (SD 129)

Supply and delivery of following G.I.Pipe and PVC Pipe specials including cost and conveyance etc., complete as per standard specifications.

GI long Bend (32mm)

GI Pipe 20 mm

GI Pipe 65 mm

GM Gate valve 20mm

GI Coupling 20mm

PVC bend 20 mm

PVC bend 32 mm

UPVC Coupler 40 mm M-1137

PVC Adapter 32 mm (Quatation)

PVC Tee 20 mm

PVC FTA (Quatation)

PVC Coupling 32 mm

PVC Tee 32 mm

PVC Elbow 32 mm

PVC Coupling 20 mm

PVC Elbow 20 mm

PVC Union 32 mm (Quatation)

PVC Hex Nipple 32 mm

8" MS bore end cap 1 B P.No 195

2" MS Clamp set PER IS 1239/PART II P.No 32

GM Non Return Valve AS PER IS BS 5154 P.No 33

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Laying of (6mm to 50 mm) Upto 2 m PVC /UPVC Pipes, following and specials to trench and laying to proper grade and alignment jointing with GI couplers with cement paste and testing to the required pressure including all labour charges etc.

UPVC Pipe 40 mm As Per PVC Rate

PVC 40 mm

UPVC 32 mm As Per PVC Rate

PVC Pipe 32 mm

PVC Pipe 20 mm

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC M20 concrete using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed.

M/S. SRI NAVALADI INFRA (BID ID -1451377)