Providing and erecting fire fighting system In Circuit House, Rajpipla Dist. Narmada (Fire Hydrant & Sprinkler System, Sump Room & Other Misc Work)

book of Quantity Unit Rate Amount

specifications)

1 Supplying, installation, testing and commissioning of electric

driven Main Fire Pump suitable for automatic operation and

consisting of following, complete in all respects, as required :

(a) Horizontal type, multistage, centrifugal, split casing pump

of cast iron body & bronze impeller with stainless steel shaft,

mechanical seal conforming to IS 1520. (b) Suitable HP

Squirrel cage induction motor, TEFC, synchronous speed

RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC

supply with IP 55 protection for enclosure, horizontal foot

mounted type with Class-'F' insulation, conforming to IS-325.

(c) M.S. fabricated Common base plate, coupling, coupling

guard, foundation bolts etc. as required. (d) Suitable cement

concrete foundation duly plastered with anti vibration pads.

1.1 2850 lpm at 88 m Hea

2 Supplying, installation, testing and commissioning of electric

driven pressurisation pump suitable for automatic operation

and consisting of following, complete in all respects, as

required : (Jockey Pump) Horizontal type, multistage,

centrifugal pump of cast iron body and bronze impeller with

stainless steel shaft, mechanical seal conforming to IS :

Suitable HP squirell cage induction motor TEFC type suitable

for operation on 415 volts, 3 phase 50 Hz AC supply with IP

class of protection for enclosure, horizontal foot mounted 1.00 Nos 112599.53

type with Class-'F' insulation, conforming to IS :

M.S.fabricated Common base plate, coupling, coupling guard,

foundation bolts etc. as required.

Suitable cement concrete foundation duly plastered and with

anti vibration pads.

3.1 180 lpm at 88 m Head

Description of Item (with brief specification and reference to

book of Quantity Unit Rate Amount

specifications)

3 Supplying, installation, testing and commissioning of diesel

engine driven main fire pump suitable for automatic

operation and consisting of following, complete in all

respects, as required : (Diesel Driven Pump) Horizontal type,

multistage, centrifugal pump of cast of iron body and bronze

impeller with stainless steel shaft, mechanical seal

conforming to IS 1520. Suitable HP, 1500 RPM water cooled

with radiator, diesel engine conforming to relevant IS

standard complete with auto starting mechanism, 12 /24

volts electric starting equipment, diesel tank, exhaust pipe

extended upto 10 m outside pump house duly insulated with 1.00 Nos 606551.56

50 mm thick glass wool with 1.0 mm thick aluminium sheet

cladding, residential silencer, instruments and protection as

per standard specification, stop solenoid for auto stop in the

event of fault with audio indications, painted with post office

red colour etc. as required. M.S fabricated, common base

plate, coupling, coupling guard, foundation bolts etc. as

required. Suitable cement concrete foundation duly plastered

and with anti vibration pads.

2.7 1620 lpm at 88 m Head

4 Fabrication, supply, Insallation testing & commissioning of

Electrical control panel of cubical construction, floor mounted

type, fabricated out of 2mm thick CRCA sheet,

compartmentalised with hinged lockable doors, dust and

vermin proof, powder coated of approved shade after 7 tank

treatment process, cable alley, interconnection with suitable

size copper conductor cable/solid copper strip, having

switchgears and accessories, mountings and internal wiring,

earth terminals, numbering etc. complete in all respect,

suitable for main fire pump, pressurisation pump & diesel

pump set complete as per CPWD specification with following

in coming and Outgoings, suitable for operation on 415V,

phase, 50Hz Ac Supply with enclosure protection class IP 42 1.00 Nos 329528.00

as required : 5.1 INCOMING - 400A, 50kA 4 Pole MCCB,

etc. LED type RYB phase indicating lamps, ON, OFF, trip

indicating lamps Set of Copper Bus Bar 300A

OUTGOING ( Note : All outgoing feeders for pumps should

ON, OFF, trip indicating lamps)

Main Fire Pump

125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic

Star/Delta starter suitable for 60 HP pump with overload

protection, current sensing type single phase preventor

complete with all acceessories and internal wiring required

5 Supply Of 12 V Battery, Coolant ,Engine Oil And Diesel Tank

Description of Item (with brief specification and reference to

book of Quantity Unit Rate Amount

specifications)

6 Providing laying,testing & commissioning of 'C' class heavy

duty MS Pipe conforming to IS 1239/3589 i/c fittings like

elbows, tees,flanges,tapers, nut bolts, gaskets etc. in ground

including welding,excavation & providing cement concrete

blocks as supports,anticorrosive treatment with

coaltar/asphalt tape as per IS 10221,refilling the trench etc.of

following sizes complete as required. 200 mm dia

7 Providing laying,testing & commissioning of 'C' class heavy

duty MS Pipe conforming to IS 1239/3589 i/c fittings like

elbows, tees,flanges,tapers, nut bolts, gaskets etc. in ground

including welding,excavation & providing cement concrete

blocks as supports,anticorrosive treatment with

coaltar/asphalt tape as per IS 10221,refilling the trench etc.of

following sizes complete as required.150 mm dia

8 Providing laying,testing & commissioning of 'C' class heavy

duty MS Pipe conforming to IS 3589/IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nut bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint of required shade complete

as required:200mm dia (wall thickness 6.3 mm)

9 Providing laying,testing & commissioning of 'C' class heavy

duty MS Pipe conforming to IS 3589/IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nut bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with 80.00 Rmt 3165.15

suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint of required shade complete

as required:150mm

10 Providing laying,testing & commissioning of 'C' class heavy

duty MS Pipe conforming to IS 3589/IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nut bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint of required shade complete

as required:100 mm dia

11 Providing laying,testing & commissioning of 'C' class heavy

duty MS Pipe conforming to IS 3589/IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nut bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint of required shade complete

as required:80 mm dia

Description of Item (with brief specification and reference to

book of Quantity Unit Rate Amount

specifications)

12 Providing laying,testing & commissioning of 'C' class heavy

duty MS Pipe conforming to IS 3589/IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nut bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint of required shade complete

as required:50 mm dia

13 Providing laying,testing & commissioning of 'C' class heavy

duty MS Pipe conforming to IS 3589/IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nut bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint of required shade complete

as required:40 mm dia.

14 Providing laying,testing & commissioning of 'C' class heavy

duty MS Pipe conforming to IS 3589/IS 1239 including

welding, fittings like elbows, tees, flanges, tapers, nut bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint of required shade complete

as required:25 mm dia.

15 Wrapping & Coating of Underground Pipe. with 4mm damar

coat for Pipe Coating etc.suitable for pipe size

100 mm dia 220.00 Rmt 252.50

16 Supplying,fixing,testing & commissioning of double flanged

sluice valve of rating PN 1.6 with non rising

spindle,bronze/gun metal seat,ISI marked complete with

nuts,bolts,washers,gaskets and conforming to IS 780 of

following sizes as required:200mm

17 Supplying,fixing,testing & commissioning of double flanged

sluice valve of rating PN 1.6 with non rising

spindle,bronze/gun metal seat,ISI marked complete with

nuts,bolts,washers,gaskets and conforming to IS 780 of

following sizes as required:150mm

18 Supplying,fixing,testing & commissioning of double flanged

sluice valve of rating PN 1.6 with non rising

spindle,bronze/gun metal seat,ISI marked complete with

nuts,bolts,washers,gaskets and conforming to IS 780 of

following sizes as required:100mm

Description of Item (with brief specification and reference to

book of Quantity Unit Rate Amount

specifications)

19 Supplying,fixing,testing & commissioning of double flanged

sluice valve of rating PN 1.6 with non rising

spindle,bronze/gun metal seat,ISI marked complete with

nuts,bolts,washers,gaskets and conforming to IS 780 of

following sizes as required:80mm

20 Supplying,fixing,testing & commissioning of butterfly valve of

PN 1.6 rating with bonze/gunmetal seat duly ISI marked

complete with nuts,bolts,washers,gasket conforming to IS 2.00 Nos 13467.22

13095 of following sizes as required:200 mm

21 Supplying,fixing,testing & commissioning of butterfly valve of

PN 1.6 rating with bonze/gunmetal seat duly ISI marked

complete with nuts,bolts,washers,gasket conforming to IS 4.00 nos 7934.90

13095 of following sizes as required:150 mm dia.

22 Supplying,fixing,testing & commissioning of butterfly valve of

PN 1.6 rating with bonze/gunmetal seat duly ISI marked

complete with nuts,bolts,washers,gasket conforming to IS 8.00 nos 5904.43

13095 of following sizes as required:100 mm dia.

23 Supplying,fixing,testing & commissioning of butterfly valve of

PN 1.6 rating with bonze/gunmetal seat duly ISI marked

complete with nuts,bolts,washers,gasket conforming to IS 2.00 nos 4412.15

13095 of following sizes as required:80 mm dia.

24 Supplying,fixing,testing & commissioning of butterfly valve of

PN 1.6 rating with bonze/gunmetal seat duly ISI marked

complete with nuts,bolts,washers,gasket conforming to IS 5.00 nos 3350.59

13095 of following sizes as required:50 mm dia.

25 Providing,installation,testing and commissioning of non

return valve of following sizes conforming to IS:5312

complete with rubber gasket,Gi bolts,nuts,washers etc.as 4.00 nos 25931.55

required:200mm

26 Providing,installation,testing and commissioning of non

return valve of following sizes conforming to IS:5312

complete with rubber gasket,Gi bolts,nuts,washers etc.as 3.00 nos 15750.74

required:150 mm dia.

27 Providing,installation,testing and commissioning of non

return valve of following sizes conforming to IS:5312

complete with rubber gasket,Gi bolts,nuts,washers etc.as 2.00 nos 9785.64

required:100 mm dia.

28 Providing,installation,testing and commissioning of non

return valve of following sizes conforming to IS:5312

complete with rubber gasket,Gi bolts,nuts,washers etc.as 1.00 nos 6811.18

required:80 mm dia.

Description of Item (with brief specification and reference to

book of Quantity Unit Rate Amount

specifications)

29 Providing,installation,testing and commissioning of non

return valve of following sizes conforming to IS:5312

complete with rubber gasket,Gi bolts,nuts,washers etc.as 4.00 nos 5127.87

required:50 mm dia.

30 Supply, Installation, Testing and Commissioning of Gun

Metal Air Release Valve with necessary fittings. Size: 25 mm

31 Supply, Installation, Testing and Commissioning of 100 mm

dia Pressure Gauge (for all pipes) of range 0 - 15 Kg / cm²

conforming to IS - 3624 having bourdon tube of stainless steel

310 in cast aluminium, stove enameled, black, weather

proof case with outer, screwed aluminium bezel and

complete with necessary U-type stainless steel siphon

tube and cock including providing suitably painted angle iron

support to the tube etc.as per required.

32 Providing & fixing of pressure switch in M.S pipe line including

connection etc. As required. 4.00 nos 3383.50

33 Providing, fixing, testing & commissioning of 50sqmm

Core Alluminium Armoured Cable of required size from Main

3 phase connection to Fire Pump House with 100 Amp MCCB 750.00 Rmt 398.95

with Cover as required:

34 Providing,installation,testing and commissioning of Y

satrainer fabricated out of 1.6 mm thick stainless steel,grade

304,sheet with 3 mm dia holes with stainless steel 6.00 Nos 15150.00

flange.150mm

35 Supplying and fixing single headed internal hydrant valve with

instantaneous Stainless Steel coupling of 63mm dia with cast

iron wheel ISI marked conforming to IS 5290 (type-A)with 9.00 Nos 5436.49

blank cap and chain required:

36 Supplying and fixing Double headed external hydrant valve

with instantaneous Stainless Steel coupling of 63mm dia with

cast iron wheel ISI marked conforming to IS 5290 (type-A)with 9.00 Nos 12625.00

blank cap and chain required:

37 Supplying & fixing 63mm dia gun metal short branch pipe

with 20mm nominal internal diameter size nozzle conforming

to IS 903 suitable for instantaneous connection to 18.00 Nos 2139.34

interconnect hose pipe coupling required:Gun metal

38 Supplying and fixing 63mm dia,15 m long RRL hose pipe with

63mm dia male and female couplings duly bound with GI

wire,rivets etc. conforming to IS 636 (type-A) as 36.00 Nos 4606.40

required:Gunmetal

Description of Item (with brief specification and reference to

book of Quantity Unit Rate Amount

specifications)

39 Supply, Installation, Testing and Commissioning of Weather

proof Standard Fire Hose Cabinet wall mounting type (750

mm x 600 mm x 250 mm deep) having single or double

opening with necessary locking arrangement by allan key 18.00 Nos 3535.00

suitable for housing 2 nos. hose pipe, 1no. Branch pipe &

nozzle spanner.

40 Supplying and Fixing of fire brigade connection of cast iron

body with gun metal male instataneous inlet couplings

complete with cap and chain as reqd. for suitable dia MS pipe

connection conforming to IS 904 as required:4 way 150mm

dia MS pipe

41 Supplying and Fixing of fire brigade connection of cast iron

body with gun metal male instataneous inlet couplings

complete with cap and chain as reqd. for suitable dia MS pipe

connection conforming to IS 904 as required:2 way 100mm

dia MS Pipe

42 Supply, and fixing First Aid Hose Reel with MS construction

spray painted with P.O red,conforming to IS 884 complete

with the following as required.

20mm nominal internal dia water hose thermoplastic(textile

reinforced) type-2 as per IS

20mm nominal internal dia gun metal globe valve and nozzle.

drum and brackets for fixing the equipment on the

wall.Connection from riser with 25mm dia stop gun metal

valve & MS pipe and socket.40mtr.

43 Providing, fixing, testing & commissioning of installation

control valve of cast iron body, brass/bronze working parts

comprising of water motor alarm, bronze seat clapper,

clapper arm and hydraulically driven mechanical gong bell to

continuous alarm when the wet riser/sprinkler system

activates, pressure gauges, emergency releases, strainer,

pressure switch, cock valve complete with drain valve and

bypass, test control box, ball valves, MS pipe of required size,

flanges, orifice plate, gasket etc of follwing sizes as required :

150 mm Dia

Description of Item (with brief specification and reference to

book of Quantity Unit Rate Amount

specifications)

44 Providing, fixing, testing & commissioning of installation

control valve of cast iron body, brass/bronze working parts

comprising of water motor alarm, bronze seat clapper,

clapper arm and hydraulically driven mechanical gong bell to

continuous alarm when the wet riser/sprinkler system

activates, pressure gauges, emergency releases, strainer,

pressure switch, cock valve complete with drain valve and

bypass, test control box, ball valves, MS pipe of required size,

flanges, orifice plate, gasket etc of follwing sizes as required

:100 mm Dia

45 SITC of Intelligent Analog Addressable Type Manual Call Point

having Surface or flush mounting

Option fully complaint to EN54 having Rotary Decade

Switches for Addressing from 01-99 complete with Back Box

for Mounting Complete as required conforming to BS5839

Standards and Duly Approved by EN54/LPCB

Make: BOSCH/HONEYWELL/SYSTEM SENSOR/ASES

46 SITC of Addressable Type Loop Powered Hooter Cum Strobe

features, IP24 housing, Wide operating voltage range,

complete with Mounting Base with required mounting 10.00 Nos 12685.60

accessories as required conforming to BS5839 Standards and

Duly Approved by EN54/LPCB

Make: BOSCH/HONEYWELL/SYSTEM SENSOR/ASES

47 SITC of Intelligent Analog Addressable Type Photoelectric

Type Above Ceiling Smoke Detector Complete with Respond

Indicator Dual LED, Hard Addressable Having rotary decade

Address switches from 01-99, complete with Mounting Base

and required mounting accessories Complete as required 100.00 Nos 4242.00

Conforming to BS 5839 Standards and Duly Approved by

Make: BOSCH/HONEYWELL/SYSTEM SENSOR/ASES

Description of Item (with brief specification and reference to

book of Quantity Unit Rate Amount

specifications)

48 SITC of 4 Loop Micro processor based 2 wire fault tolerant

loop, (each loop accessing 99 detectors and 99 modules)

Networkable Fire Alarm / Detection Control Panel. The panel

shall be able to give location of all fire/fault conditions of

addressable units via the address codes. Further, the panel

must be able to automatically switch ON /OFF respective

control module when ever any alarm is triggered. The panel

shall have rectifier, Loop cards, 4x40 – Character LCD

alphanumeric display with back-light to indicate Fire/Fault

Signal with address and analog output, external/inbuilt

printer to log all fire or fault events complete in all respects.

The panel should be networkable for up to 99 panels. The

Panel Shall be Sheet Steel Painted, sealed to IP30. The Panel 1.00 Nos 388850.00

Shall have 20 Zones with Individual LED Indicators,

expandable to 200 LED Indicators. The Panel Shall have

Serial Ports. The panel shall have provision to integrate with

PA System and shall have provision to connect to Building

Management system through Modbus Card. The panel shall

have a 4 programmable sounder outputs, and open / short

circuit monitoring. The panel shall have a built in power

supply and battery charger, which should be capable to

charge maintenance free 24 AH, 2 x 12 volt SMF Lead acid

batteries capable of running for a minimum of 24 hours with

battery charger complete as required. and conforming to

BS5839 Standards and Duly Approved by EN54/LPCB as per

specifications.

49 Supplying and laying of 2x1.5 sqmm fire alarm armoured

cable,600/1000V rated with annealed copper conductor

having XLPE insulation,steel wire armouring &FRLS outer 2200.00 Rmt 152.89

sheath complete as required.

50 FIRE DETECTION SYSTEMS ,Supply, installation, testing and

commissioning of Below False Ceilling Addressable ideal

optical smoke detector for detecting visible smoke particles

with Mounting Base Item as per drawing and specifications,

as approved by electrical engineer incharg

51 SITC of Active Repeater Panel facilitate to Silence, Mute,

Reset, Accept, Evacuate and Test Controls along with other

I/O peripheral devices and the external printer further

enhance the flexibility and functionality of the fire alarm

control panel. The Repeater Panel shall have 80 character

Backlit adjustable alphanumeric LCD display and the 7 LED 1.00 Nos 126954.98

status indicators. The Repeater Panel shall have “Access

Enable” key-switch and with required power battery backed

up power supply. Duly Approved bt EN54/LPCB as per

specifications.

Make: BOSCH/HONEYWELL/SYSTEM SENSOR/ASES

Description of Item (with brief specification and reference to

book of Quantity Unit Rate Amount

specifications)

52 Providing and fixing of RS485 Network Card for Fire

Addresable System

Panel (GST200 , GST-NRP00 etc.) Maximum 1200 meters, 1.00 Nos 46359.00

Class A Connection

53 Providing,fixing,testing & commissioning of 15mm dia

quartzoid bulb type sprinklers of rating 68 degree centigrade

with required accessories:Pendent sprinkler

54 Providing,fixing,testing & commissioning of 15mm dia

quartzoid bulb type sprinklers of rating 68 degree centigrade

with required accessories:Horizontal side wall sprinkler 60.00 Nos 546.68

55 Providing,fixing,testing & commissioning of 15mm dia

quartzoid bulb type sprinklers of rating 68 degree centigrade

with required accessories:Concealed sprinkler

56 Providing, fixing photo luminescent Signage's as per IS

standard in Block / Small Letters on rigid sheet with necessary

wall or Ceiling fittings as Specified Sizes: 5200.00 Sq.inch 9.09

For Fire Extinguisher,exit,do not to do,etc.

57 Supply, installation, testing and commissioning of ABC type

6 kg confirm to IS:15683, with ISI marked / TAC

approved fitted with required accessories including 20.00 Nos 2626.00

wall suspension brackets.

58 FIRE EXTINGUISHER

Supply, installation, testing and commissioning of Carbon

Dioxide (CO2) type Fire Extinguisher of 4.5 kg confirm to

IS:15683, with ISI marked / TAC approved fitted with required

accessories including wall suspension brackets.

59 Supply, installation, testing and commissioning of Modular

ABC type 5 kg confirm to IS:15683, with ISI marked / TAC

approved fitted with required accessories including 4.00 Nos 2525.00

wall suspension brackets.

60 Supply, installation, testing and commissioning of Stainless

steel Ball Valve. a) 25mm dia 25.00 Nos 1212.00

61 Providing Core Cutting for beam & Slab up to 25 mm to

mm dia directed by engineer in-charge. 95.00 Nos 858.50

62 Supplying, Installing, Testing & Commissioning of M.S.

structural steel support. 1500.00 kg 90.90

63 Suppy, Installing, Testing and Commissioning of C.I. Heavy

duty foot valve with flangs, Nut bolts, Gaskets etc. with

necessary complete accessories.150mm

Description of Item (with brief specification and reference to

book of Quantity Unit Rate Amount

specifications)

64 Suppy, Installing, Testing and Commissioning of C.I. Heavy

duty foot valve with flangs, Nut bolts, Gaskets etc. with

necessary complete accessories.100mm

65 Fire Resistant Door Double Leaf Hinge Type (2 Hour Fire

Rated) 1.00 mm thick GI Sheet cladded 40mm thick shutter

complete with GI frame (Single Ribet – Frame Profile 100 x

57mm) made from 1.20mm thick GI Sheet & Fixing

arrangements AS PER BS 476 PART- 20 & 22 & IS: 3614 Part - II

for Integrity, Stability.Door Size: 2000mm (W) x 2100mm (H) 2.00 Rmt 79285.00

Including below Accessories S.S. Ball Bearing Hinges- 6 Nos

Vision Panel with Fire Glass of Size: 200 x 300mm - 2 Nos

Heavy Duty Door Closer - 2 Nos Heavy Duty Door Closer -

Nos Panic Exit Device for Double Leaf Door - 1 No. External

Trim Bar (Panic Latch) - 1 No.

66 3 Layer PVC Storage Tank 10000 ltr. Installation With all

accessories like M.T,L.T,Band,Clamp,Solution And Plumbing

charges including as per MR

67 Fire Blanket 6.00 Nos 2222.00

68 K-type Fire Extinguisher 4.00 Nos 22220.00

69 Supplying FIRE bucket round bottom of 9 liters capacity made

out of 24 gauge G.I Sheet with extra handle at bottom duly

painted white inside and Red out side with FIRE mark. Filled

with dry-sand and kept on existing stand provided or hung on

70 Supplying and erecting floor mounting Stand for keeping four

nos. of FIRE buckets comprising 1500 mm in length, 900 mm

height frame made out of 30mm x 30 mm x 4 mm angle iron

with cross supports legs, welded with 4 hooks and duly 4.00 Nos 5807.50

painted with one coat of primer and two coats of approved

enamel P O red paint.

71 Submitting the application to obtain Fire Plan Approval and

After Completion of Work Obtain Final Fire NOC for 3 Year 1.00 Nos 186850.00

72 Supply, installation, testing & commissioning of Priming tank,

HDPE type, 1000 litres, with necessary piping 100 mm size, G.I

pipe for priming the pumps, pipe of with butterfly valves for

isolation, Water Filling to priming tank by piping min. 50 mm

size, with all complete.

73 Pay Legal Fees to Concern Authority for Obtaining Plan

Approval and Final NOC 2698.00 SQ.mtr 15.15

74 Excavation for foundation up to 1.50 MT depth including

sorting out and stacking of useful materials and disposing the

excavated stuff up to 50 mt lead B) Dense or Hard soil

Description of Item (with brief specification and reference to

book of Quantity Unit Rate Amount

specifications)

75 Excavation for foundation for depth from 1.5 m to 3.0 m

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead. 75.00 Cum 174.56

B) Dense or Hard soil

76 Excavation for foundation for depth from 3.0 m to 5.0 m

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter 25.00 Cum 333.38

lead.(D) Soft rock not requiring Blasting

77 Providing and laying controlled cement concrete M.150 and

curing complete including the cost of formwork and excluding

reinforcement for reinforced concrete work in (A) 8.00 Cum 3792.55

Foundations and plinth pcc

78 Providing and laying controlled cement concrete M.250 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in(A)

Foundations, footings, and Mass concrete. footing

79 Providing and laying controlled cement concrete M.200 and

curing complete including the cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in (C) 14.00 Cum 6473.09

Ground floor Slab

80 Providing and laying controlled cement concrete M-250 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in (d) 3.00 Cum 7841.64

columns Up to Plinth level.

81 Providing and laying controlled cement concrete M-200 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in 4.00 Cum 7780.03

Columns, pillars posts and struts Ground FLOOR

82 Providing and laying controlled cement concrete M-200 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in 18.00 Cum 5822.65

Ground & Plinth BEAMS

83 Providing and laying controlled cement concrete M.200 and

curing complete including the cost of form work but excluding

the cost of reinforcement for reinforced concrete work in (C) 3.00 Cmt 6176.15

Ground floor Beams,

84 Brick work using common burnt clay building bricks having

crushing strength not less than 35 Kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B) 20.00 Cmt 4279.98

Conventional.

Description of Item (with brief specification and reference to

book of Quantity Unit Rate Amount

specifications)

85 Brick Work using Common Burnt Clay Building Bricks having

crushing strength not less than 35 Kg/sm. in super structure

Above plinth level up to floor two level in cement mortar

(1:6) ( 1 cement : 6 fine sand) (Conventional) For All Floors

86 Providing and laying controlled cement concrete M-200 and

curing etc. complete including the cost of form work and

excluding the cost of reinforcement etc. complete in RCC wall 17.00 Cmt 8846.59

up to floor two level for Below plinth

87 Providing cement vata (10cm x 10cm size) quarter round in

cement mortar 1:1 including neat cement finishing watering

etc. Complete

88 Providing 20 mm thick double coat mala cement plaster on

interior brick / concrete work for plastering comprising of

base coat of 12 mm thick cement plaster in cement mortar (1

Cement : 4 coarse sand) in rough finishing and 8 mm thick top

coat of cement mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel including scaffolding curing etc. complete.

For Ground floor

89 Providing Water proofing Treatment on Sunk Slab including

cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-

graded stone aggregate 20mm nominal size) laid in one layer

and finished with a floating coat of neat cement average 114.00 Sqm 373.70

50mm thick to Prepare slope including water proofing

chemical etc. Complete for Sunk Slab All Floor.

90 Providing and laying Ceramic tiles 6mm thick in skrting risers

of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry 114.00 Sqm 1070.50

(upto 10 ton)

91 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size

having weight not less than 35Kg. 1.00 Nos. 958.17

92 Providing TMT Bar FE 500D reinforcement for R.C.C. work

including bending, binding and placing in position complete

up to All floor Level

93 Providing & erecting open well horizontal mono block pump

set with cast iron body, complete for three phase submersible

motor having [H]For 15 H.P,3 phase open well horizontal

mono block pump set suitable for 1600 LPM to 1025 LPM @ 2.00 Nos 36107.50

33 to 42 MTR head suitable for 65/80 mm dia delivery pipe

Description of Item (with brief specification and reference to

book of Quantity Unit Rate Amount

specifications)

94 20 mm thick Sand faced Gutka cement plaster with 1x1 cm

grooves as suggested by this office consisting of 12 mm thick

backing coat of C.M. 1:3 ( 1 cement : 3 coarse sand ) and

mm thick finishing coat of C.M. 1:1 ( 1 cement : 1 coarse

sand) for all heights as directed etc. complete.

95 Providing 10 mm. Thick Mala cement plaster in single coat for

plastering on ceiling and soffits of stairs and finished even

and smooth in : (I) Cement mortar 1:3 (1 cement : 4 sand)

including Mala troveled finish etc. complete comp.For

.Ground Floor

96 P & L 60x60 cm Machin cut Mirror polished Blue Kota Stone

slab 25 mm thick flooring over 20 mm (average)thick base of

cement mortar 1:6 (1-cement 6-coarse sand) or L.M 1:1.5 (1

Lime putty : 1.5 coarse sand laid over and jointed with grey 38.00 Sqmt 1019.39

cement slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc.complete

97 P & L 60x60 cm Machin cut Mirror polished Blue Kota Stone

slab 25 mm thick in riser of steps,skirting dedo and pillars laid

on 10 mm thick cement mortar 1:3 (1-cement 3-coarse sand)

and jointed with grey cement slurry mixed with pigment to 2.00 Sqmt 1205.60

match the shade of slab including rubbing and polishing

etc.complete

98 Applying two coats of Birla (white cement based) or Asian

(acrylic lappy (putty)) or equivalent and two coats of primer

of approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the surface 119.00 Sqmt 40.59

free from mortar dropping and other foreign matter and sand

papered smooth.

99 Distempeing (Two coats) with oil bound distemper of

approved brand and manufacture and Washable of required

shade on wall surfaces to give an even shade, over and

including a priming coat with distemper primer of approved

brand and manufacture after thoroughly brushing the surface 176.00 Sqmt 77.30

free from mortar dropping and other foreign matter and also

including preparing the surface even and sand papered

100 Distempeing (Two coats) with oil bound distemper of

approved brand and manufacture and Washable of required

shade on Celling and sloping roof to give an even shade, over

and including a priming coat with distemper primer of

approved brand and manufacture after thoroughly brushing 75.00 Sqmt 85.85

the surface free from mortar dropping and other foreign

matter and also including preparing the surface even and

sand papered smooth.

Description of Item (with brief specification and reference to

book of Quantity Unit Rate Amount

specifications)

101 Wall painting two coats with weather proof acralic emulsion

APEX type paint of approved brand & manufacture and of

required shade on exterior wall surface to give an even shade

over and including a primery coat with alkaly resistance

primer of approved brand after throughly brushing surface to

remove all dirt and remains of loose powdered materials etc

comp. for all height.

102 Providing and fixing rolling shutters of approved make made

of 80 mm wide M.S laths inter-locked together through heir

entire length and jointed together at the ends by end locks

mounted on specially designed pipe shaft with bracket

plates,guide channels and arrangement for inside and outside 9.00 Sqmt 2796.59

locking with push-pull operation including the cost of hood

cover and sprig etc.complete(A) Shutters having width Above

103 Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 95mm x 24mm

x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt)

horizontal two track member size size 92mm x 31.75mm x

1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt),

vertical member of size size 92mm x 31.75mm x 1.50mm (of

Jindal Section no:8933,@ Wt. 1.06 Kg/mt)with sliding shutters

of horizontal member size 40mm x 18mm x 1.29mm (of Jindal 4.00 Sqmt 2362.39

Section no:8949 @ wt.of 0.456Kg/mt), vertical member of

size 40mm x 18mm x 1.29mm (of Jindal Section no:8947 @

wt.of 0.456Kg/mt/ Section 8948, @ Wt. 0.457 Kg/mt) with

mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details

etc complete for W2&W3

104 Providing and laying controlled cement concrete M-200 and

curing etc. complete including the cost of form work and

reinforcement for reinforced concrete work in (c) Chhajja for 1.00 Cumt 6299.37

105 Providing and laying controlled cement concrete M-200 and

curing etc. complete including the cost of form work and

reinforcement for reinforced concrete work in (c) Lintel for 1.00 Cmt 7430.57

Ground floor

Description of Item (with brief specification and reference to

book of Quantity Unit Rate Amount

specifications)

106 Providing and laying water proofing treatment with broken

china mosaic flooring over 50mm thick cement concrete

flooring 1:2:4 level in one layer & finished with a floating coat

& net cement using 12mm to 20mm of broken piece of

ceramic glazed tiles (or more colour directed ) to be laied over

cement mortar bedding of cm 1 : 3 (1 cement 3 sand ) to blain

or slope and to be tempered to bring mortar ceramic up to 44.00 Sqm 1164.53

surface with using white cement and colour pigment

including rounding of junction extending them up to 15cm

along the wall and caring with bends any patten or design on

per drawing and clennig by using oxalic acid etc. Completed

107 Providinfg and fixing Safty grills of required pattern for

windows/ Door using necessary M.S angle/ M.S pipe, M.S

flats and other structural steel at required spacing including

cutting, welding and fabriction etc. including one coat of 90.00 Kg 116.91

primer of approved quality and two coats of oil painting as

per detail drawing etc complete.

Description of Item (with brief specification and reference to

book of Quantity Unit Rate Amount

specifications)

108 Providing and fixing Mirrar polished 18 mm thick Green

Marble stone with full round edge and polished of approved

quality in clading on sill and around the doors/ windows/

ventilation with 20 mm thick cement motor CM (1:3) and

fixing with cement slurry & adhesive including moulding of

exposed edges as directed by engineering in charge etc.

Total…

I/We am/are willing to carry out the work at… % above/below percent(Should be written in figures and words) of the

estimated rate mentioned above. Amount of my /our tender works out as under.

* Estimated Amount * Estimated Amount

put to tender put to tender

Deduct :…………% Below Add :………%Above

Net Total

In Words …………………………………… In Words………………………………

* (Please strike out whichever is not applicable).

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change

as per actual mix design the cost of difference of cement consumption have been deducted from the rate of

original item at the rate of input rate mentioned in all the tender.

5 The amount of Box Cutting material credit materials at Rs.0.00 shall be deducted from first R.A. Bill.

6 The Contractor will have to submit the mix design for different grades his own cost befor execution as directed and

to be approved From the Engineer In Charge.

Deputy Executive Engineer Executive Engineer

Const. (R&B) Sub-Division Rajpipla (R&B) Division

Rajpipla Rajpipla