Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.9 LAccepted-AOC 27 19 F F D BLOCK CHATTARPUR EXTN SOUTH WEST DELHI DELHI 110075 | SOUTH WEST DELHI | DELHI | 110075 | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹35.7 L+₹4.0 L (12.8%)Rejected-Finance 2 B KRISHNA NAGAR AMBALA CANTT | AMBALA | HARYANA | 133001 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹41.6 L+₹9.9 L (31.4%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
1 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE UTILITY AMBALA
GE UTILITY AMBALA CANTT 133001
REPAIR MAINTENANCE CLEANING OF SYL TANK NO 1 AND 3 AND CONNECTED ITEMS AT SYL AT SECTOR C UNDER GE UTILITY AMBALA CANTT
2022_MES_561270_1
CA NO GE U AMB T 47 OF 2022-23
Open Tender
Civil Works
Item Rate
240 days
GE UTILITY AMBALA CANTT
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE UTILITY AMBALA CANTT
₹92,000
13 Dec 2022
3 Nov 2022
3 Dec 2022
3 Nov 2022
1 Dec 2022
17 Nov 2022
3 Nov 2022 - 10 Nov 2022
Amount
Dewatering water from SYL raw water tank No.1 and 3 ,size 170 x 170 x 12 m (slant height) at SYL by means of deisel engine pump including PVC / HDPE pipe complete with operator complete all as specified and directed by Engr-IN-Charge.
Desilting/ cleaning of SYL raw water tanks of No.01 and 03, size 170 x 170 x 12m (slant height) deep and removing the same at low lying area upto 5 KM distance spreading and compacting the same complete all as specified and directed by Engr-IN-Charge.
Taking out the existing embankments at broughrt upto 3.0M, distance upto 500 M reforming the embankments with same earth after dry,spreading in layers, compacting and finished to required shape and slop complete all as specified and directed by Engr-IN-Charge.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level complete all as specified and directed by Engr-IN-Charge.
Demolition of Brickwork or stone/ boulder masonry, built cement mortar complete all as specified and directed by Engr-IN-Charge.
Forming embankments including raising (or lowering) earth spreading in layers n exc. 30 cm thick;watering, ramming/rolling and finishing to required size, shape, etc, n exc. 1.5 m high from base complete all as specified and directed by Engr-IN-Charge.
All as per item no 5 here in before but exc 1.5m and n.exc 3.0m.
Rough excavation in soft and loose soil by means of mechanically Excavator exceeding 1.5m width and n.exc 1.5m deep and getting outincluding removal of excavated soil to a distance of exc 1.5Km but n.exc 3.0KM complete all as specified and directed by Engr-IN-Charge.
Material and labour Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-IN-Charge.
Material and labour for laying of 250 micron black polythene film over sand gilling complete all as specified and directed by Engr-IN-Charge.
Material and labour for 100 mm thick PCC 1:2:4 using 20 mm graded crushed stone aggregate complete all as specified and directed by Engr-IN-Charge.
Material and labour for Brickwork with subclass‘B’ bricks, straight orcurved on plan exc 6m mean radius built in C.M 1:4 complete all as specified and directed by Engr-IN-Charge.
All as per item No 11 here in before but except bricks complete all as specified and directed by Engr-IN-Charge.
Material and labour for Bricks, sub class B, laid flat in floors, old size bricks jointed with in C.M 1:3 and pointed flash in C.M 1:3 with crud oil including dismanling of inclined floor surfaces complete all as specified and directed by Engr-IN-Charge.
All as per Item no 12 here in before but except bricks.
Material and labour, Hardcore of gauge n exc. 63mm, broken bricks deposited, spread andlevelled in layers n exc. 15cm thick, watered and to a true surface complete all as specified and directed by Engr-IN-Charge.
Material and labour for 75 mm thick cement concrete type B- 2,1:3:6 (20mm graded) complete all as specified and directed by Engr-IN-Charge.
Material and labour for cement concrete1:2:4 in foundations,filling and mass concrete complete all as specified and directed by Engr-IN-Charge.
Material and labour for PCC 1:2:4 using 12.5 mm graded crushed stone aggregate in coping,benching and similar work finished even and fair.incl necessary form work complete all as specified and directed by Engr-IN-Charge.
Material and labour for flush pointing in C.M 1:3 to brick wallinclined laid flat including racking out joints complete all as specified and directed by Engr-IN-Charge.
Material and labour for Rendering 15mm thick in C.m 1:4 on fair faces of brickwork or concrete surfaces with using water proofing compound complete all as specified and directed by Engr-IN-Charge.
Supply only intregal water proofing compound
Supply and mixing un slaked lime complete all as directed.
Removal of all types debries or demolished bldg materials (Other than soils) to a distance beyound the 500 m including loading and unloading complete all as specified and directed by Engr-IN-Charge.
Dismantling of mild steel work of any description not specifically provided for in any position complete all as specified and directed by Engr-IN-Charge.
S/F of mild Steel tubular medium grade pipes in strut, walk ways, railing, posts including all necessary welding. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240
Demolition of R.C.C of any description and in any position.
Mild steel TMT bars 10mmdia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter.
Fixing only in repairs chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed by Engr-IN-Charge.
Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed by Engr-IN-Charge.
Material and labour for vibratory compacted, precast cement concrete rubber moulded, colored (except grey color), interlocking designer paver blocks in Milano shape, confirming to IS-15658-2006 of 60mm thickness, M-35 grade, as in path, hard standing, etc. laid over and including 25mm compacted sand cushioning ,including 75mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate including surface excavation over area n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil and removing excavated soil exc 50mtr but n. exc 250mtr, complete all as specified and directed by Engr-IN-Charge.
Supply and fixing in replacement of concerteena coil with barbed wires and barbs having 1000mm dia of streched coils complete all as specified and directed by Engr-IN-Charge.
Reinforced cement concrete 1:2:4 using 20 mm graded aggregate(nominal mix) in:- Foundations, including rafts,footings, foundation beams;plinth beams, bases complete all as directed.
Cutting V groove 10 mm wide and 0mm deep in concrete floor and filled polyurethane joint sealant complete all as directed.
Scraping old existing paint from pipes of different sizes including making smooth surface and primer and applying two coat of synthetic enamel paint of existing/approved colour as specified and directed by Engr-in-charge.
Preparation of old/new plastered or un plastered surfaces of wall and applying two coats of cement based paint complete all as specified and directed by Engr-IN-Charge,
Material and labour 5 Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with and including one number SS clamps (grade -202) of flat 30mm X 2mm,150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment
Note:- 1. All the above items are for raw water tank of 200 Lakh Glns capacity tank No.1 and 250 Lakh Glns capacity tank No. 03 at SYL ,Contractor will arrange all equipments, tools/plant and machinary such as JCB, trolley tractor , boat etc or any other of any type best suitable for cleaning of tanks and based on the site requirement for the above mentioned items work . 2. No extra payment will be done to contractor for arranging these Items. 3. Contractor will make arrangement for reaching upto or inside tanks and repair the same if any damages are done at site during execution of item mentioned above then same has to be make good by contractor with no extra amount will be paid for that . 4. Contractor should visit the site before quoting the rate.
Note:- Amount of credit of Rs. 170490.00 for retrieved materials is mentioned in Schedule of Credit attached in tender documents in pdf form which will be deducted offline while acceptance of tender.
Puneet Sharma
MAYANK ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .