Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.2 LAccepted-Finance | ₹15.2 L | L1 | Accepted-Finance Being L1 |
| 2 | L2₹18.8 L+₹3.6 L (23.3%)Rejected-Finance | ₹18.8 L+₹3.6 L (23.3%) | L2 | Rejected-Finance Being L2 |
Tender Value
₹20.0 L
EMD Value
₹39,993
Closing Date
15 May 2026, 4:30 pmClosed
Executive Engineer
O/o The Inspector General Ftr Hqr SSB Tezpur
Annual repair and maintenance Civil of Govt Non residential buildings at RTC Salonibari under FTR Hqrs SSB Tezpur
2026_SSB_907325_1
NIT No.02/FTR-TZP/2026-27
Open Tender
Civil Works
Works
240 days
RTC SSB Salonibari
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹39,993
27 May 2026
6 May 2026
18 May 2026
6 May 2026
15 May 2026
6 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | CEMENT CONCRETE (CAST IN SITU)Providing and laying in position excluding cement concrete of level: specified grade the cost of centering and shuttering - All work up to plinth1:2:4 (1 Cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) | - | Cum | 7,780.3 | - |
| 2 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. | 1 | sqm | 749.3 | ₹748.55 |
| 3 | REINFORCED CEMENT CONCRETEProviding and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3(1 cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | 9,045.75 | - |
| 4 | MASONRY WORKHalf brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4(1 cement :4 coarse sand) | 85.8 | sqm | 905.05 | ₹77,653.29 |
| 5 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4(1 cement :4 coarse sand) | 75 | Sqm | 1,123.8 | ₹84,285 |
| 6 | CLADDING WORK Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | 73.5 | sqm | 1,267.95 | ₹93,194.33 |
| 7 | WOOD AND P. V. C. WORK Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 37.8 | Sqm | 2,392.65 | ₹90,442.17 |
| 8 | 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws | 31.5 | Sqm | 2,093.7 | ₹65,951.55 |
| 9 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) 125 mm | 20 | each | 39.95 | ₹799 |
| 10 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm | 50 | each | 115.15 | ₹5,757.5 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 6.67 MB
BOQ_953661.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .