Kerala

AOC

Works

Civil Works - Buildings

LSGD/CELSGD/115162/23 - Maintenance in Anganwadi 7,8 and 9, Kodunganoor ward

Local Self Government Department

Kodunganoor | Thiruvananthapuram, Kerala

Amount: ₹5.1 LCloses: 17 Nov 2025Closed

Timeline

Published10 Nov 2025
Closed17 Nov 2025
Awarded13 Feb 2026

Bids

Item Rate

2 Bids13 Feb 2026

#	Company	Amount	Rank	Status
1	SURESH L1₹4.4 LAccepted-AOC CHANDRAVILASAM PANACHIKKADU P O KOTTAYAM \| KOTTAYAM \| KOTTAYAM \| KERALA	₹4.4 L	L1	Accepted-AOC L1
2	BABU SUKUMARAN NADAR L2₹4.9 L+₹48,331.71 (10.9%)Rejected-Finance	₹4.9 L+₹48,331.71 (10.9%)	L2	Rejected-Finance L2

BoQ Comparative

Line Items (37)

Sl No	Description	Qty	Unit	SURESH L1	BABU SUKUMARAN NADAR L2
1.00Maintenance
1.00	14.1.2:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:Cement mortar 1:4 ( 1 cement: 4 coarse sand)	30.7	sqm	536.17 ₹16,460.42 Lowest	594.44 ₹18,249.31
1.00	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	91.25	sqm	753.25 ₹68,734.06 Lowest	835.12 ₹76,204.7
1.00	12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)	21	metre	505.4 ₹10,613.4 Lowest	560.33 ₹11,766.93
1.00	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	410	kg	173.77 ₹71,245.7 Lowest	192.65 ₹78,986.5
1.00	50.6.6.2:Hollow block masonry using pre cast solid blocks (factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for Super structure up to floor two level for 10 cm thick wall in: CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete	2.06	cum	6,538.29 ₹13,462.34 Lowest	7,248.91 ₹14,925.51
1.01	15.13.1:Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metres and below	1	each	132.65 ₹132.65 Lowest	147.07 ₹147.07
1.01	15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar	0.18	cum	1,905.02 ₹342.9 Lowest	2,112.07 ₹380.17
1.01	2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil	2.52	cum	321.76 ₹810.84 Lowest	356.73 ₹898.96
1.01	4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)	0.23	cum	7,095.53 ₹1,596.49 Lowest	7,866.72 ₹1,770.01

Tender Value

₹5.1 L

EMD Value

₹12,708

Closing Date

17 Nov 2025, 4:00 pmClosed

Tender Inviting Organisation

Name

Superintending Engineer

Address

Superintending Engineer Thiruvananthapuram Corporation 695033

Work Description

LSGD/CELSGD/115162/23 - Maintenance in Anganwadi 7,8 and 9, Kodunganoor ward

Tender Information

Tender ID

2025_LSGD_814638_12

Reference Number

DB/62983/2025-26 (82)

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Period of Work

180 days

Location

Kodunganoor

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

9 documents required · 9 mandatory

Fee/PreQual/Technical/Finance

RequiredSigned Copy of Preliminary Agreement (.pdf)

RequiredSigned Copy of Form of Tender (.pdf)

RequiredSigned Copy of Affidavit (.pdf)

RequiredSigned Copy of Integrity pact (.pdf)

RequiredSigned Copy of BID Document (.pdf)

RequiredSigned Copy of GST Registration certificate (.pdf)

RequiredSigned Copy of Contractor License and PAN card (.pdf)

RequiredSigned Copy of E payment form (.pdf)

RequiredSigned BOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹1,125

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹12,708

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

13 Feb 2026

Published

10 Nov 2025

Bid Opening

19 Nov 2025

Download Starts

10 Nov 2025

Download Ends

17 Nov 2025

Submission Starts

10 Nov 2025

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Bid Opening Summary

finance_1375509.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.28 MB

Tendernotice_2.pdf

PDF • 0.25 MB

Tendernotice_3.pdf

PDF • 0.25 MB

Work Item Documents

FT.pdf

Tender Documents • 0.26 MB

PA.pdf

Tender Documents • 0.26 MB

Aff.pdf

Tender Documents • 0.24 MB

IP.pdf

Tender Documents • 0.24 MB

Epay.pdf

Tender Documents • 0.24 MB

NIT.pdf

Tender Documents • 0.27 MB

viewsbd.pdf

Tender Documents • 2.09 MB

BOQ_1375509.xls

BOQ • 0.33 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

SURESH

L1₹4.4 LAccepted-AOC

CHANDRAVILASAM PANACHIKKADU P O KOTTAYAM | KOTTAYAM | KOTTAYAM | KERALA

BABU SUKUMARAN NADAR

L2₹4.9 L+₹48,331.71 (10.9%)Rejected-Finance

Sl No	Description	Qty	Unit	SURESH L1	BABU SUKUMARAN NADAR L2
1.00Maintenance
1.00	14.1.2:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:Cement mortar 1:4 ( 1 cement: 4 coarse sand)	30.7	sqm	536.17 ₹16,460.42 Lowest	594.44 ₹18,249.31
1.00	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	91.25	sqm	753.25 ₹68,734.06 Lowest	835.12 ₹76,204.7
1.00	12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)	21	metre	505.4 ₹10,613.4 Lowest	560.33 ₹11,766.93
1.00	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	410	kg	173.77 ₹71,245.7 Lowest	192.65 ₹78,986.5
1.00	50.6.6.2:Hollow block masonry using pre cast solid blocks (factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for Super structure up to floor two level for 10 cm thick wall in: CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete	2.06	cum	6,538.29 ₹13,462.34 Lowest	7,248.91 ₹14,925.51
1.01	15.13.1:Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metres and below	1	each	132.65 ₹132.65 Lowest	147.07 ₹147.07
1.01	15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar	0.18	cum	1,905.02 ₹342.9 Lowest	2,112.07 ₹380.17
1.01	2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil	2.52	cum	321.76 ₹810.84 Lowest	356.73 ₹898.96
1.01	4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)	0.23	cum	7,095.53 ₹1,596.49 Lowest	7,866.72 ₹1,770.01

Sl No

Description

Qty

Unit

SURESH

BABU SUKUMARAN NADAR

1.00Maintenance

1.00

14.1.2:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:Cement mortar 1:4 ( 1 cement: 4 coarse sand)

30.7

sqm

536.17

₹16,460.42

Lowest

594.44

₹18,249.31

1.00

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

91.25

sqm

753.25

₹68,734.06

Lowest

835.12

₹76,204.7

1.00

12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)

metre

505.4

₹10,613.4

Lowest

560.33

₹11,766.93

1.00

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

410

173.77

₹71,245.7

Lowest

192.65

₹78,986.5

1.00

50.6.6.2:Hollow block masonry using pre cast solid blocks (factory made) of size 40x20x10cm or nearest available size confirming to IS 2185 part I of 1979 for Super structure up to floor two level for 10 cm thick wall in: CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding etc complete

2.06

cum

6,538.29

₹13,462.34

Lowest

7,248.91

₹14,925.51

1.01

15.13.1:Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metres and below

each

132.65

₹132.65

Lowest

147.07

₹147.07

1.01

15.7.4:Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

0.18

cum

1,905.02

₹342.9

Lowest

2,112.07

₹380.17

1.01

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

2.52

cum

321.76

₹810.84

Lowest

356.73

₹898.96

1.01

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

0.23

cum

7,095.53

₹1,596.49

Lowest

7,866.72

₹1,770.01