Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | H1₹2.8 LAdmitted-Finance | +2.00% | ₹2.8 L | H1 | Admitted-Finance |
| 2 | H2₹2.8 L−₹5,575.54 (1.97%)Admitted-Finance | -0.01% | ₹2.8 L−₹5,575.54 (1.97%) | H2 | Admitted-Finance |
Tender Value
₹2.8 L
EMD Value
₹8,350
Closing Date
12 Aug 2026, 11:00 amClosed
Ex. Engineer JSD PHE GWD Srinagar
Bagi Ali Ali Marardan Khan Nowshera Srinagar, Ex. Engineer JSD PHE GWD Srinagar
Construction of 125mm dia machine drilled bore well NHO Mohammad Ashraf Dar at Dudwan Saderkoot Bala.
2026_PHE_316833_4
e-NIT No 31 of 2026-27
Open Tender
Drilling Works
Percentage
10 days
Mohammad Ashraf Dar at Dudwan Saderkoot Bala.
Construction of 125mm dia machine drilled bore well NHO Mohammad Ashraf Dar at Dudwan Saderkoot Bala.
2 documents required · 2 mandatory
₹100
Yes
Ex. Engineer JSD PHE GWD Srinagar
₹8,350
Yes
28 Aug 2026
20 Jul 2026
13 Aug 2026
20 Jul 2026
12 Aug 2026
20 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Drilling of 125mm diameter tube well by air rotary drilling rig unit suitable for lowering of MS casing of 125mm diameter in suitably drilled bore hole as per specifications laid down in IS 2800 (part-I) with up to date amendments. The job is to be done all kinds of soils, boulder, rocks, collapsible strata, saturated soils, artisan conditions by ODEX/DTH attachments and exploration of ground water by tapping sufficient aquifer zones. The job includes the cost shifting of drilling accessories, tools, bits, casing shoe, consumables like fuel, lubricants, skilled and unskilled laboures and other unforseen items. Development of tube well with backwash method with air compressor of minimum capacity 1000 CFM 9300 PSI air delivery system) with suitable arrangements till well is throughly developed in all respects as per the directions of site engineer. | 55 | Mtr | 2,400 | ₹1,32,000 |
| 2 | Providing fitting of MS 125mm dia pipe and subsequent loweing of casing assembly and its welding after every 10 feet, up to the drilled desired depth. The casing is to be slotted as per the site requirement and as directed by site engineer. The specifications of the tube well shall be as per IS 4270 : 2001 | 55 | Mtr | 2,050 | ₹1,12,750 |
| 3 | Supply, installation, testing and commissioning of INDIA Mark II hand pump assembly comprising of cylinder, head, handle assembly, front cover, handle, axle, washers, nuts/bolts. | 1 | No. | 11,000 | ₹11,000 |
| 4 | Providing / fitting of risers 32mm dia GI incuding sockets | 8 | Nos. | 1,700 | ₹13,600 |
| 5 | Supplying, assembling, loweing and fixing of connecting rods of 12mm dia x 3 Mtr long with hex coupler made of bright bar | 8 | Nos. | 380 | ₹3,040 |
| 6 | Providing/laying of plain cement concrete block of size 4ftx4ftx1ft in 1:3:6 mix to give adequate strength to act as a sanitary block for the well and to grout the hand pump assembly in order to make it robust to resist shock load observed while pumping. The job includes providing/laying of PCC edges of 4"x4" in 1:3:6 mix and P/L of cement plaster in 1:4 mix to the above block to give aesthetically good appearance. Cost on account of stuttering, struttting, centering, curing etc. is included in the scope of work. In case the suitable space for the above specification is not available, the surface area is to be adjusted accordingly. | 1 | Job | 5,000 | ₹5,000 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.18 MB
BOQ_1035389.xls
BOQ • 0.33 MB
EN1st.pdf
PDF • 0.47 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .