SPECIAL REPAIR TO ROAD OF AD BDE SIG COY AND INTERNAL ROAD FROM GATE NO 03 MAIN ROAD TO WKSP AREA OF LT AD REGT WKSP (COMP) UNDER GE LUDHIANA

Amount

Repairs to pot holes of any depth, area not exc 1.00Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads. Path etc, cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings all as specidied and directed.

M&L for preparing existing black top surfaces with wire brushes for removing cracked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with paving bitumen (VG - 30) at the rate of 5 Kgs per 10 Sqm of road surfaces all as specified and directed.

M&L for premixed bituminius macadam with paving bitumen(Consolidated thickness 75mm or less) laid/rolled and compacted to required gradient and camber with 8 to 12 tonne power roller complete all as specified and directed.

M&L for bituminous premix asphaltic semi dense concrete 30 mm thickness using machanicle paver with 5.5% binder content (paving bitumen (VG - 30) by weight of total mix, rolled and compacted to required camber and gradient per 10 Sqm rolling consolidating to achieve uniform, smooth surface with 8 to 12 tonne power roller as required gradient and camber all as specidied and directed.

M&L for providing and marking broken/continous central/end line on the road pavement and the like of description and width using hot applied thermoplastic compound 2.50mm thick (excluding thickness of glass beads) and providing reflective glass beads @ 250 gm per SQM as per IRC-135, confirming to MORTH complete all as specified.

S&F in repairs Road Studs/Cat eye the body of stud is made of ABS material two reflectors are fitted in the body. The road stud is dynamically designed so that it can bear load upto 25 Tons and its impact strength is about 230 KN weight of stud is 130 gms. Body colour Yellow with swareflex beads of size 100mm X 19mm. fixed on roads by nail at intervals as directed by engineer -in-charge.

CHOUDHARY ENTERPRISES

ANUJ ABROL CONTRACTOR

M/s Surjit Singh and bros

M/s Bansi Lal

S S BUILDERS

GURPARTAP SINGH GULATI

PK ENTERPRISES