Janbhagidari

Name of Work : PROVIDING STREET LIGHT POLES WITH LED LIGHT AND COMPLETE. (1)

GREENCITY GATE TO M.S.P NAGAR GATE (2) SHUBHAM PARTY PLOT TO GREENCITY

GATE(3) NR. BHAIRAVNATH COLD STORAGE AT RANPUR ROAD. for Deesa Nagar Palika,

Deesa. Dist.Banaskantha.

Description Quantity Rate Per Amount

Supplying & erecting decoratives street lights with mild steel

m height and 4 mm thk. round poles with dual arms brackets,

mounting plate,base plate and inbuilt connection/terminal box.

1 Pole should be P.u. paint. and pole should be weight of 130 to 11.00 26260.00 Nos.

145 kg.The pole shall be rust proof, weather proof, corrosion

resistant with 1 year warrenty MR

Providing , erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S. angles,

flats, bars, channels, sections complete with cutting, welding,

2 grinding & finishing duly painted with one coat of red oxide 200.00 77.77 Kg.

with erection on site as per direction of engineer in charge with

necessary grouting, cementing, plastering & finishing

complete. (Elect SOR - 3-16-4-A)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be laid

3 on wall with necessary clamps or in existing trench / pipe of 1000.00 138.37 Mtr.

following size of cables, (c) 4 core 10 Sq. mm, 4-3-4.

Supplying and erecting Flexible PVC insulted multistrand

kv grade ISI marked copper wires of following size to be

erected as directed.For Mains SOR 1.4.5) 1.50 Sq.mt 3 core

round PVC shethed.

Providing and, fixing heavy duty flange type brass cable gland

with rubber ring for PVC insulated armoured cable complete

5 with out going tails, insulating tape etc for following size of 80.00 38.38 Nos.

cables. (d) 2 to 4 core 10 Sq. mm, SOR- 4-6-1.

Pipe type earthing having 150 cms. long and 2.5 cms. dia.

galvanised iron pipe with coupling and buch buried in specially

prepared earth pit complete with necessary 8 SWG earth

wire.SOR-3.14.6A

For using sa;t and charcoal / coke as required for pipe type

earthing. SOR-3.14.6 c

Providing and erecting HOT deep Galvanised iron strip wire

to 16 SWG.SOR-3.14.5

"B" class Galvanised iron pipe having smooth finished bore of

the pipe on both ends erected nuts and bolts along the pole /

wall shaping the pipe as per site required. Pipe dia as following

(d) 50 mm dia.SOR-6.5.5

making trench in Hard Murrum / Tar Road of suitable width of

90 cms. or depth for laying any size of cable or locating the

10 fault all over the run and normal ground.(B) if additional 330.00 351.48 Rmt

machineries like hammer driller or JCB use[Add],SOR-4.5.2

Providing and erecting cable clamp of 25 mm X 3 mm M.S flat

11 suitable for fixing 2 Nos. of armoured cable with nuts and bolts, 22.00 112.11 Nos.

(c) for 140 mm dia Pole.SOR-6.3.3

Providing 1:2:4 cement concrete foundation & 70 % PCC

from bottom including excavation for the pole of size 60 X 60 X

120 cms. Deep in below ground level with plinth of 45 cms X

45 cms (or 45 cms dia X 45 cms) high upper ground level with

necessary curing and finishing in approved manner.( for 7.5 &

8/8.5 mtr pole) SOR-6.3.5

Description Quantity Rate Per Amount

Providing and erecting Miniature circuit breaker single pole 6A

to 25A suitable to operate on 240 V A.C. system and having

13 breaking capacity 10 KA to be erected in existing box. 49.00 112.11 Nos.

confirming to IS 8828/1996 with ISI Mark , Cat.III, SOR

Supplying & erecting approved make time switch with single

pole airbreak contacts suitable for 230 V.15/16A.complete with

self starting motor driven clock ‘ON’ &’ OFF’ automatic

14 arrangement at any predetermined time during each 24 4.00 2354.31 Nos.

hours,With nickel cadmium rechargeable battery backup

erected as directed.SOR It.6.7.1

Providing & erecting 240 V MCB double pole switch for lighting

Load (B Curve) having 10 KA breaking capacity & confirms to

IS : 8828 in existing box having following capacity (A) 6 to

Amp. Cat.III It no.3.10.3

Supplying & erecting power contactor for time switch complete

16 erected as per direction Cat III 20.00 1883.65 Nos.

[B] 2 pole 250V 32 Amp. It no.6-7-5

Supplying & erecting approved make SMC press moulded

composite FRP.loop-out approx 2mm thick box complete with

bakalite connector strip 4way & clamp with nuts,bolts &

17 washers suitable for erection on pole with cable 18.00 898.90 Nos.

clamps&earthbolt of following size of box.(a)

300mmx200mmx100mm [deep]. SOR 6.4.3 ( For control

Equipment & Power Equipment Per Pole 2 nos.)

Supplying steel tabular pole (Swaged) confirming to IS-2713

(Part-II) 1980.Manufacturing process of steel tubular pole

should be as per IS specification Basic steel tube should be ISI

Marked Pole should be painted by one coat of Zinc comel

Promer and two coat of Aumonium / approved paint to be

erected on / in existing Foundation .The length of poles are as

below.(B) 8.5 mtr. Long Swaged Steel tubular pole(i) Pole as

per IS code 410-SP-16 with 300 X 300 X 4 mm base plate.

(Approximate weight 75 Kg) For burial erection,SOR 6.1.3

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with

toughened glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than 0.95, THD <

10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.)(A) Street Light (IP-65),

Surge protection -4KV integral and ,Light must have 440VAC

line supply with over-voltage protection. (i) above 36 to

watts Cat-ll ELC. SOR 22-23 Chp -2 item no. -2.16.2

Providing Aluminium arm bracket of having 2 sets of suitable

SS304 hardware for fixing the brackets & spread of 1.2 Mtr

(Suitable for 89 to 114 mm pole top dia) SOR 23-24 Chp -6

item no. -6.1.8(A) Single arm bracket

making trench in Hard Murrum / Tar Road of suitable width of

90 cms. or depth for laying any size of cable or locating the

21 fault all over the run and normal ground.(B) if additional 450.00 297.95 Rmt

machineries like hammer driller or JCB use[Add],SOR-4.5.2

Description Quantity Rate Per Amount

Providing and erecting cable clamp of 25 mm X 3 mm M.S flat

22 suitable for fixing 2 Nos. of armoured cable with nuts and bolts, 18.00 112.11 Nos.

(c) for 140 mm dia Pole.SOR-6.3.3

Total Amount Rs.

Total Amount Rs.