185 sqmm XLPE cables Under Ground of Cable trench for shifting of 11kV feeders in newly constructed control room of kapadwanj West Sub division at Attarsumba Substation under MbAd Divison office.(Including Gst)

-: SCHEDULE - B :-

Name of work : Estimate for 185 sqmm XLPE cables Under Ground of Cable trench for shifting of 11kV feeders

in newly constructed control room of kapadwanj West Sub division at Attarsumba Substation under M'bAd Divison

IT DESCRIPTION QTY RATE UNIT AMOUNT

Excavation for foundation in trenches up to 1.5m depth including sorting

out and stacking of useful materials,backfilling the trenches and

disposing of the excavated stuff up to any lead -Dense or Hard soil

1 Excecuted with mannual labour. Note :- No extra payment shall be made 532 259.14 Cmt

for extra excavation work if required for providing of any type of

shuttering / Form work for all type of concrete work.

Filling Foundation and Plinth with murrum or selected soil

2 in layers of 20cm thickness incl. watering ramming consolidation 213 279.23 Cmt

3 Disposing off the excavated stuff of above excavation item from the 320 103.68 CMT

last face of excavation for lead off 200 to 300 mtr

4 Providing and laying cement concrete 1:4:8 (1 Cement : 4 Coarse and : 8 38 2653.67 Cmt

black crushed stone aggregate 40mm nominal size ) and curing complete-

Foundation and plinth.

Providing & laying control cement concrete M-20 as per mix

design exposed work with curing etc. complete including the cost of ply

5 wood form work & adjustable tubular steel supports / Props. and the 48 4264.94 CMT

cost of reinforcement.G.F+FF & Staircasse -For Footing base of

col.,foundation & mass concrete.

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding reinforcement

for reinforced concrete work in (B) Walls, from top of foundation level

upto floor two level

Providing & Fixing in position as per approved drawing TMT steel

reinforcement bars FE500/500D confirming to IS 1786 in RCC work

including Cutting, bending, binding with 16 gauge annealed wire, of bars

as per IS requirement If necessary and placing in position etc. completed

7 for RCC work. etc. completed as directed by EIC. 14 75460 MT

Providing and fabricating and erecting Gl work Welded angle posts, racks

& trays for cable trench using structural steel angels and flats, sheets etc.

of approved steel manufacturer as per drawing & design including

cutting, welding & fixing hold fast in wall with C.C. & with hot deep

8 galvanized as per IS-2633/72 and 209 of 1966 or latest amendmentetc& 4700 106 KG

make etc. completed as directed by EIC.(All materials required for the

work to be brought by the contractor)

Providing & placing 50mm thick & 300mm wide Prestressed

Concrete Cover (for clear span of up to 1.2 meter in proportion

(1:1:5:3) or M-20 necessary reinforcement or 4mm dia HT steel

wire-4 Nos. bars and 4mm dia. distribution bars at 150 mm C/C as

per drawing & design including vibrating with vibrators. Finishing

9 all the surfaces, curing by placing in water pond for ten days etc. 260 577 Smt

complete as directed by E.I.C. ( The rate includes cost of all

material required, labour charges, transportation, loading,