DEPOSIT Mallappally Taluk office Modification of existing hall to make it new conference hall General Civil Work

Amount

Taluk conference Hall civil work only

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

9.17.1:Providing and fixing flat pressed 3 layer particle board medium density exterior grade (grade I) or graded wood particle board IS: 3087 marked,to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately):12mm thick

OD117124/2021-2022:Providing and fixing Cubicles with 12 mm thick Prelaminated particle board with one side decorative and other side balancing lamination of height 90 cm and 5.5 mm glass of height 30 cm fixed in 75 x 50 mm powder coated Aluminium frame fixed in floor etc complete as per the directons of departmental officers. The specifications of materials to be used for this work are as noted : a) Aluminium T or L Sections with Powder coating of 50 microns (b) Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS:12823 (exterior grade) 12 mm thick (c) Float glass sheet of nominlal thickness 5.5 mm (of weight not less than 13.50 Kg/ sqm) (d) Neoprene / EPDM rubber gasket and sundries .The minimum quantities of each material to be used for this work should be as noted below :-Details of materials required for 1.85x1.35=2.5sqm1)Aluminium Sections- powder coatedExternal member of the frame (Jindal sections no 4605)V = 2x1.35 = 2.7 mH = 3x1.85 = 5.55 mtotal= 8.25 m @ 1.653 kg/m = 13.64 kg(ii) snap beading (Jindal section no 4407)2 x 4 x 1.85 =14.8 ,2 x 2 x 1.35 = 5.4total 20.2 m @ 0.176 kg/m =3.56 kgiii) Angle cleat 38x38x4.8 mm 50 mm long6x0.05 = 0.30 m @ 0.985 kg/m = 0.30 kgSub total = 17.50 kgAdd 5% wastage = 0.88 kgTotal = 18.38 kg 2) Prelaminated sheet 1.85x.9=1.67m2Add 5% wastage = 0.08 m2Total = 1.75 m23) Glass 5.5mm thick 1.85x0.3=0.56m2Add 5% wastage = 0.03 m2Total = 0.59 m24) Neoprene / EPDM rubber gasket - 4.51 metres etc

50.9.11.2:Providing and fixing Thomson Multi wood board or equivalent make paneling 18 mm thick, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately)as per the direction of site Engineer-in-charge.

21.18:Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

13.26:Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

OD117634/2021-2022:Engaging Cooile

ANIL RAJ

Bidder Name

PHILIP THOMAS

ANIL RAJ