Upgradation of Teaching District Hospital at Baramulla by way of SITC of Medical Gas Pipeline System at 200 Bedded New Hospital at GMC Baramulla (Allied Works thereof)

Electro-Mechanical part

Servo-Stabiliser

SITC of 3-phase, Oil cooled 100KVA heavy duty Servo Stabilizer micro processor controlled with high and low voltage cut off, single phase preventer ,over load and phase failure protection having digital display with a working range of 170-460 volts Phase to phase. The servo stablilizer shall also be equipped with by-pass arrangement. As per IS standards and specifications. Capcity: 100 KVA with input of 170-460 Volts Phase to phase and output of 415 volts ±5% phase to phase

Main Panel for Manifold room

SITC of Main Control Panel having cubicles for each equipment (viz. Compressed Air System-2 No's, Vaccum System-2 No's, Oxygen & Nitrous Manifold system and Main Master alarm and three blank cubicles). Main and individual switch gears and starters for Air Compressor and Vacuum System Pumps, Oxygen and Nitrous Manifolds and Main Master alarm with switch breaker for each equipment. On load change Over Switch (200A), MCCB (160A). The control panel shall be provided with the Aluminium bus bars duly insulated of required ratings as per equipments design and specifications.

Cable Tray Supply and fixing of 300 mm wide perforated cable tray of 2mm thickness and supported from ceiling wall duly painted as per site condition.

150mm wide

300 mm wide

Electrical Cable Providing and fixing/laying of PVC insulated unarmoured copper conductor cables from main supply, disribution panel board to Servo stabiliser/Main Panel, various manifold room equipments like Air compressor and vaccum pumps, Manifold systems, Master alarm etc. through walls/ceiling with appropriate clamps, end termination and fixing arrangements as per site requiremnt.

4Core-6sq.mm

4 Core- 4sq.mm

3C-2.5sq.mm

2C 1.5 sqmm

3.5 Core - 120 sq.mm Al Armoured Cable

Earthing for various equipments inside Manifold Room using copper plate electrode of size 600x600x3 mm placed in pit filled earthing chemical by copper strip of size 20x3 mm along with perforated GI Pipe as per specifications

Copper strip of size 20x3 mm from earthing electrode to the panel, stabiliser, compressor system, vacuum system Pumps, Master alarm etc. using proper fasteners and concealed wherever required.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer Incharge in cement Mortar

Kota Stone slab flooring 25mm thick over 20mm(avarage thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4(1 cement : 4 course sand)

Providing and fixing of Aluminium work for Doors, Windows, ventilators and partitions with extruded built-up standard tubular sections /appropriate Z-sections and other sections of approved make Conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket felt etc. Aluminium section shall be smooth , rust free , straight mitred and jointed mechanically whwrever required includimng clear angle , aluminium snap beading for glazing/Pannelling , C.P Brass /Stainless steel screws , all complete as per architectural drawings and the directions of Engineer-In-charge

Provviding and fixing of 12mm thick Plywood including cost of nails etc. complete Job as false ceiling

Providing and fixing Plywood 4mm thick one side decorative veneer Conmforming to IS : 1328(type 1), for plain lining /cladding with neceassry screws, including priming coat on unexposed surface with decorative veneer facings

Providing and applying Wall putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete including carriage of material involved upto site.

Distempering with Oil bound washable distemper of approved brand and manufacture to give an even shade on new work (two or more coats) over and incluyding Priming coat with water Thinnable cement Primer

Supplying, Installing and Commissioning of Lighting Points opf approved brand including cost of switches, mcbs etc.

Supplying, Installing and Commissioning of Heating points of approved brand including cost of switches, mcbs etc.

Supplying, Installing and Commissioning of Fan points of approved brand including cost of switches, mcbs etc.