Loading
Loading…
Loading…
Tender Value
₹1.6 Cr
EMD Value
₹1.6 L
Closing Date
27 Aug 2026, 5:30 pmClosed
PORBANDAR MUNICIPAL CORPORATION
CONSTRUCTION OF NIGHT SHELTER BUILDING FOR PORBANDAR MUNICIPAL CORPORATION AT PORBANDAR, DIST. PORBANDAR (SECOND ATTEMPT)
337021
PMC/2026/08/ENG/02
Open
Civil - All
Works
Porbandar
3 documents required · 3 mandatory
₹4,248
Municipal Commissioner, PORBANDAR MUNICIPAL CORPORATION
₹1.6 L
20 Aug 2026
20 Aug 2026
20 Aug 2026
27 Aug 2026
20 Aug 2026
Name of work : CONSTRUCTION OF NIGHT SHELTER BUILDING FOR PORBANDAR MUNICIPAL CORPORATION
AT PORBANDAR, DIST. PORBANDAR (SECOND ATTEMPT)
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
1 Excavation for foundation up to 1.5 Meter depth Rupees One Hundred Seventeen
including sorting out and stacking of useful materials and Eight Paise
and disposing of excavated stuff up to 50 Meter lead
(A) Loose or Soft soil
2 Excavation for foundation up to 1.5 Meter depth Rupees Ninety Nine and Eighty
including sorting out and stacking of useful materials Nine Paise
and disposing of excavated stuff up to 50 Meter lead
(B) Dense or Hard soil
3 Excavation for foundation up to 1.5 Meter depth Rupees One Hundred Sixty Nine
including sorting out and stacking of useful materials and Fifty Eight Paise
and disposing of excavated stuff up to 50 Meter lead
(B) Hard Murrum
4 Filling in foundation and plinth with murrum or Rupees Two Hundred Eighty
selected soil in layers of 20 cm thickness including Nine and Six Paise
watering, ramming and consolidating etc. complete.
5 Filling available excavated earth (excluding rock) in Rupees One Hundred Thirty and
trenches, plinth, sides of foundations etc. in layers not Thirty Nine Paise
exceeding 20 cm. In depth consolidating each
deposited layer by ramming and watering
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
6 Providing and laying cement concrete 1:2:4 (1-cement Rupees Three Thousand Six
: 2-coarse sand : 4-graded stone aggregate 20 mm. Hundred Ninety Seven and
Nominal size) and curing complete excluding cost of Ninety One Paise
form work in : (a) Foundation and plinth
7 Providing and laying cement concrete 1:3:6 (1- Rupees Three Thousand Five
cement : 3-coarse sand : 6-graded stone aggregate 40 and Seventy Six Paise
mm. Nominal size) and curing complete excluding cost
of form work in : (a) Foundation and plinth
8 Providing and laying controlled cement concrete M-250 Rupees Nine Thousand Five
and curing complete including the cost of form work Hundred Fifty One and Fifty
and excluding reinforcement for reinforced concrete Seven Paise
work in (B) Walls, from top of foundation level upto
floor two level.
9 Providing and laying controlled cement concrete M-250 Rupees Nine Thousand Five
and curing complete including the cost of form work Hundred Eighty Four and One
and excluding reinforcement for reinforced concrete Paisa
work in (B) Walls, for second floor level.
10 Providing and laying controlled cement concrete M-250 Rupees Nine Thousand Six
and curing complete including the cost of form work Hundred Sixteen and Forty Five
and excluding reinforcement for reinforced concrete Paise
work in (B) Walls, for staicase room level.
11 Providing laying Controlled cement concrete M-250 and Rupees Four Thousand Three
curing complete including the cost of form work and Hundred Eighty Six and Forty
excluding cost of reinforcement for reinforced concrete Three Paise
work in : RCC Column Footings
12 Providing laying Controlled cement concrete M-250 and Rupees Seven Thousand Nine
curing complete including the cost of form work and Hundred Eleven and Thirty
excluding cost of reinforcement for reinforced concrete Three Paise
work in :RCC Column up to Plinth Lvl.
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
13 Providing laying Controlled cement concrete M-250 and Rupees Six Thousand Two
curing complete including the cost of form work and Hundred Forty One and Eighty
excuding cost of reinforcement for reinforced concrete Paise
work in : RCC Plinth beams
14 Providing laying Ordinary cement concrete M-200 and Rupees Four Thousand Nine
curing complete including the cost of form work and Hundred Ninety Seven and Forty
excluding cost of reinforcement for reinforced concrete Eight Paise
work in : RC coping/Cap
15 Providing laying Controlled cement concrete M-250 and Rupees Seven Thousand Nine
curing complete including the cost of form work and Hundred Eleven and Thirty
excluding cost of reinforcement for reinforced concrete Three Paise
work in : RCC Columns for upto floor two level.
16 Providing laying Controlled cement concrete M-250 and Rupees Seven Thousand Nine
curing complete including the cost of form work and Hundred Forty Three and
excluding cost of reinforcement for reinforced concrete Seventy Seven Paise
work in : RCC Columns for Second floor level.
17 Providing laying Controlled cement concrete M-250 and Rupees Six Thousand Six
curing complete including the cost of form work and Hundred Seventy Six and Ten
excuding cost of reinforcement for reinforced concrete Paise
work in : RCC Floor Beams at upto floor two level
18 Providing laying Controlled cement concrete M-250 and Rupees Six Thousand Seven
curing complete including the cost of form work and Hundred Eight and Fifty Four
excuding cost of reinforcement for reinforced concrete Paise
work in : RCC Floor Beams at Terrace Floor level.
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
19 Providing laying Controlled cement concrete M-250 and Rupees Six Thousand Five
curing complete including the cost of form work and Hundred Fifty One and Eighty
excluding cost of reinforcement for reinforced concrete Seven Paise
work in : RCC Slabs & Landings upto floor two level
20 Providing laying Controlled cement concrete M-250 and Rupees Six Thousand Five
curing complete including the cost of form work and Hundred Eighty Four and Thirty
excluding cost of reinforcement for reinforced concrete One Paise
work in : RCC Slabs & Landings Second Floor level
21 Providing laying Controlled cement concrete M-250 and Rupees Six Thousand Six
curing complete including the cost of form work and Hundred Sixteen and Seventy
excluding cost of reinforcement for reinforced concrete Five Paise
work in : RCC Third Floor Slabs & Landings
22 Providing laying Controlled cement concrete M-200 and Rupees Seven Thousand Five
curing complete including the cost of form work and Hundred Ten and Thirty Six
excluding cost of reinforcement for reinforced concrete Paise
work in : RCC Lintels and Chhajas upto floor two level
23 Providing laying Controlled cement concrete M-200 and Rupees Seven Thousand Five
curing complete including the cost of form work and Hundred Forty Two and Eighty
excluding cost of reinforcement for reinforced concrete Paise
work in : RCC Lintels and Chhajas Second Floor level
24 Providing laying Controlled cement concrete M-200 and Rupees Seven Thousand Five
curing complete including the cost of form work and Hundred Forty Four and Seventy
excluding cost of reinforcement for reinforced concrete Paise
work in : RCC Staircase upto floor two level
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
25 Supplying cutting, bending binding & placing in Rupees Seventy Nine and Thirty
position steel as per plan and design and as per ISS Six Paise
2502 including cost of steel and binding wire for
reservoirs/structures only incliding lift upto 6m height
or depth below G.L.for all diameter. (9.5) TMT FE-500
52002.00 CRS GARADE ALL DIA 79.36 Kg.
26 Supplying cutting, bending binding & placing in Rupees Eighty and Thirty Six
position steel as per plan and design and as per ISS Paise
2502 including cost of steel and binding wire for
reservoirs/structures only incliding lift upto 6m height
or depth below G.L.for all diameter. (9.5) TMT FE-500
5827.80 CRS GARADE ALL DIA (Second Floor) 80.36 Kg.
27 Supplying cutting, bending binding & placing in Rupees Eighty One and Thirty
position steel as per plan and design and as per ISS Six Paise
2502 including cost of steel and binding wire for
reservoirs/structures only incliding lift upto 6m height
or depth below G.L.for all diameter. (9.5) TMT FE-500
566.40 CRS GARADE ALL DIA (Third Floor) 81.36 Kg.
28 Providing and fixing 35mm thick shutter for doors, Rupees Five Thousand Five
windows and clerestory windows including Indian teak Hundred Thirty Three and Sixty
wood frames 12cm x 7cm. Size including anodized Eight Paise
alluminium fixtures and fastenings including primer
coat of approved quality and two coats of oil painting
67.10 etc, complete. (ii) Fully Panelled. 5533.68 m2
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
29 Providing and fixing FRP frame size 100 x 50mm and Rupees Two Thousand Three
28mm thick FRP depress panel shutter having extra Hundred Seventy Seven and
reinforcement on sides & edges in Gel coat finish. The Seventy Six Paise
core of the shutter & frame is to be filled up with
injected fire retardant grade polyurethene foam done
in situ along with embedded wooden pieces for
stiffening & also taking hinges & fintures. The whole
FRP frame & shutter is to be water proof weather
proof, termite proof & resistance to mild acid/alkali.
Rates are to be inclusive of S.S hinges with necessary
screws & alluminium fixtures & fastenings & fasterner
30 White stone bela masonry block in course in sub- Rupees Six Thousand Seventy
structure with stone of approved quality in Lime mortar Four and One Paisa
1:6 (1cement : 6 course sand) including racking the
joints etc. complete.
31 White stone bela masonry block in course in super Rupees Six Thousand Thirty
structure with stone of approved quality in Cement Seven and Fifty Five Paise
mortar 1:6 (1cement : 6 course sand) including
racking the joints etc. complete upto floor two level.
32 White stone bela masonry block in course in super Rupees Six Thousand Seventy
structure with stone of approved quality in Cement Four and One Paisa
mortar 1:6 (1cement : 6 course sand) including
racking the joints etc. complete Second Floor level.
33 White stone bela masonry block in course in super Rupees Six Thousand One
structure with stone of approved quality in Cement Hundred Ten and Forty Seven
mortar 1:6 (1cement : 6 course sand) including Paise
racking the joints etc. complete. For Third Floor
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
34 White stone bela masonry work in partition walls up to Rupees Six Hundred Thirty Four
15 cm thickness in cement mortar 1:4 course sand) and Forty Five Paise
(more than 10 ton) upto floor two level
35 White stone bela masonry work in partition walls up to Rupees Six Hundred Seventy
15 cm thickness in cement mortar 1:4 course sand) and Ninety One Paise
(more than 10 ton) Second Floor level
36 Providing 15 mm thick cement plaster in single coat on Rupees Two Hundred One and
Rough side of single or half brick walls for interior Seventy Three Paise
plastering up to floor two level and finished even and
smooth in & Extra over items for finishing with a
floating coat of neat cement slurry. ( more than
1349.80 ton) (ii) Cement mortar 1:4 ( 1 cement : 4 sand) 201.73 m2
37 Providing 15 mm thick cement plaster in single coat on Rupees Two Hundred Twenty
Rough side of single or half brick walls for interior Four and Forty Eight Paise
plastering up to floor two level and finished even and
smooth in & Extra over items for finishing with a
floating coat of neat cement slurry. (more than 10 ton)
(ii) Cement mortar 1:4 (1 cement : 4 sand) for Second
579.80 Floor Level 224.48 m2
38 Providing 15 mm thick cement plaster in single coat on Rupees Two Hundred Forty
Rough side of single or half brick walls for interior Seven and Twenty Four Paise
plastering up to floor two level and finished even and
smooth in & Extra over items for finishing with a
floating coat of neat cement slurry. (more than 10 ton)
(ii) Cement mortar 1:4 (1 cement : 4 sand) for Third
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
39 Providing 10 mm thick cement plaster in single coat on Rupees One Hundred Eighty
brick/concrete walls for interior plastering up to floor Nine and Forty Seven Paise
two level and finished even and smooth in & Extra over
items for finishing with a floating coat of neat cement
slurry for plastering on ceiling and soffits of stairs up to
floor two level instead of plastering on walls.
(ii) Cement mortar 1:4 (1: cement - 4: sand)
40 Providing 10 mm thick cement plaster in single coat on Rupees Two Hundred Ten and
brick/concrete walls for interior plastering up to floor Thirty One Paise
two level and finished even and smooth in & Extra over
items for finishing with a floating coat of neat cement
slurry for plastering on ceiling and soffits of stairs up to
floor two level instead of plastering on walls. Second
339.10 (ii) Cement mortar 1:4 ( 1 cement : 4 sand) 210.31 m2
41 Providing 10 mm thick cement plaster in single coat on Rupees Two Hundred Thirty One
brick/concrete walls for interior plastering up to floor and Sixteen Paise
two level and finished even and smooth in & Extra over
items for finishing with a floating coat of neat cement
slurry for plastering on ceiling and soffits of stairs up to
floor two level instead of plastering on walls. Third
33.90 (ii) Cement mortar 1:4 ( 1 cement : 4 sand) 231.16 m2
42 Applying two coats of Birla (white cement based) or Rupees Forty and Fifty Nine
Asian (acrylic lapy-putty) or equivalent & two coats of Paise
primer of approved brand and manufacture on new
wall surface to give an even shade including
thoroughly brushing the surface free from mortar
dropping and other foreign matter and sand papered
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
43 Wall painting (two coats) with plastic emulsion paint of Rupees Eighty and Thirty Five
approved brand and manufacture on undecorated wall Paise
surface to give an even shade including thoroughly
brushing the surface free from mortar droppings and
other foreign matter and sand papered smooth.
44 20 mm thick sand faced cement plaster on walls up to Rupees Three Hundred and
height 10 meters above ground level consisting of 12 Sixty Six Paise
mm thick backing coat of c.m. 1:3 (1:cement - 3:sand)
and 8 mm thick finishing coat of c.m. 1:1 (1:cement -
1:sand) etc. complete
45 20 mm thick sand faced cement plaster on walls up to Rupees Three Hundred Seven
height 10 meters above ground level consisting of 12 and Nineteen Paise
mm thick backing coat of c.m. 1:3 (1:cement - 3:sand)
and 8 mm thick finishing coat of c.m. 1:1 (1:cement -
1:sand) etc. complete (Extra Over height more than
meters from ground level for every additional height of
5 meters) up to terrace parapet wall Level
46 Finishing wall with weather proof exterior emulsion Rupees One Hundred Fourteen
paint on wall surface (two coats) to give an required and Fifty Three Paise
shape even shade after thoroughly brushing the
surface to remove all dirt, and remains of loose
powdered materials.etc complete
47 Providing and laying broken China mosaic flooring for Rupees Seven Hundred Forty
terrace using 12 mm to 20 mm broken pieces of glazed Seven and Twenty Nine Paise
tiles to be laid over cement mortar 1:3 to plain or
slope and to be tempered to bring mortar crème out up
to surface using white cement including rounding off
junctions and extending them up to 15cm along the
wall clearing with water and oxalic acid etc. as directed
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
48 Providing and laying polished Granite slab flooring over Rupees Two Thousand Four
20mm (average) thick base of cement mortar 1:6 (1- Hundred Twelve and Eighteen
cement : 6-coarse sand) or L.M. 1.1.5(1-Lime putty : Paise
1.5 - coarse sand) laid over and jointed with pigment
to match the shade of slab including rubbing and
92.50 polishing etc. complete. (upto 10 ton) 2412.18 m2
49 Providing and laying Granite slab in riser of steps Dedo Rupees Two Thousand Nine
and pillars laid 10mm thick Cement Mortar 1:3 (1 Hundred Thirty Six and Seventy
Cement : 3 Coarse Sand)and jointed with Grey Cement Eight Paise
Slurry including rubbing and polishing complete.
50 providing and laying 24" x 24" vitrified 8mm thick tiles Rupees One Thousand Four
flooring over 20mm (average) base of cement mortar Hundred Six and Twenty Two
1:6 (1-cement : 6-coarse sand) on new surface or Paise
fixing on existing flooring by adhesive materials
including dismantling of existing flooring and jointed
with color cement slurry including finished with flush
pointing & clearing the surface etc. complete for Light
51 Providing and laying white glazed tiles of 6 mm thick in Rupees One Thousand Seventy
skirting of steps and dado on 10 mm thick cement Three and Ninety Paise
plaster 1:3 (1:Cement - 3-Coarse Sand) and jointed
with white cement slurry.
52 Providing and fixing window having extruded
aluminum Colour anodized section frame main outer
size 63.50 x 38.10 x 1.95 mm(of Jindal Section
no:4605,@ Wt 1.094 Kg / Rmt), horizontal two track
member size 61.85 mm x 31.75 mm x 1.20mm (of
Jindal Section no: 8687 @ wt.of 0.695 Kg/mt), vertical
member of size 61.85 mm x 31.75mm x 1.30 mm (of
Jindal Section no:8758 @ wt.of
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
0.0.659 Kg/mt) with sliding shutters of horizontal Rupees One Thousand Seven
member size 40mm x 18mm x 1.29mm (of Jindal Hundred Thirteen and Seventy
Section no:8949 @ wt.of 0.456Kg/mt), vertical Paise
member of size 40mm x 18mm x 1.29mm (of Jindal
Section no:8947 @ wt.of 0.456Kg/mt/ Section
@ Wt. 0.457 Kg/mt) with 5 mm the trans- -parent
bronze color tinted float glass with powder coated
aluminum fittings and fixtures and transparent silicon
sealant glass fixing to frame as per details etc.
64.00 complete for window. 1713.70 m2
53 Providing and fixing window having extruded
aluminum Colour anodized section frame main outer
size 63.50 x 38.10 x 1.95 mm(of Jindal Section
no:4605,@ Wt 1.094 Kg / Rmt), horizontal Four track
member size 61.85 mm x 31.75 mm x 1.20mm (of
Jindal Section no: 8687 @ wt.of 0.695 Kg/mt), vertical
member of size 61.85 mm x 31.75mm x 1.30 mm (of
Jindal Section no:8758 @ wt.of
0.0.659 Kg/mt) with sliding shutters of horizontal Rupees Two Thousand One
member size 40mm x 18mm x 1.29mm (of Jindal Hundred Forty and Thirty Three
Section no:8949 @ wt.of 0.456Kg/mt), vertical Paise
member of size 40mm x 18mm x 1.29mm (of Jindal
Section no:8947 @ wt.of 0.456Kg/mt/ Section
@ Wt. 0.457 Kg/mt) with 5 mm the trans- -parent
bronze color tinted float glass with powder coated
aluminum fittings and fixtures and transparent silicon
sealant glass fixing to frame as per details etc.
28.50 complete for window. 2140.33 m2
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
54 Providing & fixing Pre-cast Rubber Dye Inter Locking Rupees Six Hundred Eighty Six
concrete block 60 mm thick with grade of concrete and Ninety Paise
M200 pneumatic compressed by mechanically pressed
and as per approved design including 75 mm sand
layer for levelling and filling the joint with sand with
66.40 proper line and level etc. complete. 686.90 m2
55 Providing, laying and jointing in true line and level Rupees One Hundred Ninety
50mm dia. U.P.V.C. pipe (SCH-40) for cold water Five and Sixty Seven Paise
including fitting as approved by engineer-in-charge.
Pipe shall be fixed on the wall with the help of clamp at
every two meter C/C or shall be concealed as directed
including necessary fittings etc. including testing of
pipe and joints and fixing the same with adhesive
60.00 solvent, including cost of all materials. 195.67 m
56 Providing, laying and jointing in true line and level Rupees Seventy Two and Sixty
15mm dia U.P.V.C. pipe (SCH-40) for cold water Five Paise
including fitting of Prince / Supreme / Astral / Finolex
or equivalent or as approved by engineer-in-charge.
Pipe shall be fixed on the wall with the help of clamp at
every two meter C/C or shall be concealed as directed
including necessary fittings etc. including testing of
pipe and joints and fixing the same with adhesive
76.00 solvent, including cost of all materials. 72.65 m
57 Providing, laying and jointing in true line and level Rupees Ninety One and Eighty
25mm dia U.P.V.C. pipe (SCH-40) for cold water Four Paise
including fitting as approved by engineer-in-charge.
Pipe shall be fixed on the wall with the help of clamp at
every two meter C/C or shall be concealed as directed
including necessary fittings etc. including testing of
pipe and joints and fixing the same with adhesive
68.00 solvent, including cost of all materials. 91.84 m
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
58 Providing, laying and jointing in true line and level Rupees One Hundred Nineteen
32mm dia U.P.V.C. pipe (SCH-40) for cold water and Fifteen Paise
including fitting as approved by engineer-in-charge.
Pipe shall be fixed on the wall with the help of clamp at
every two meter C/C or shall be concealed as directed
including necessary fittings etc. including testing of
pipe and joints and fixing the same with adhesive
120.00 solvent, including cost of all materials. 119.15 m
59 Providing and fixing water closet squatting pan Rupees One Thousand Three
(European type W.C. Pan) with integral P or S trap Hundred Three and Seventy One
including jointing the trap with soil pipe in cement Paise
mortar 1:1 (1-cement:1-Fine sand) (seal and cover to
be measured and paid for separately) (A) vitreous
17.00 China pattern: (I) in white color. 1303.71 each
60 Providing and fixing urinal approved quality connecting Rupees One Thousand Thirty Six
the urinal with waste pipe, trap etc. complete (A) and Twenty Seven Paise
White earthen ware flat back or corner type size
61 Providing and fixing PVC SWR Nahni Trap is 14735 for Rupees Five Hundred Fifty Eight
drain 100 mm dia. with Jali of the following nominal and Thirty Six Paise
dia of self cleaning design with C.I. screwed down or
hinged grating including the cost of cutting and making
good the walls.
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
62 Constructing brick masonry chamber for under ground Rupees Two Thousand Nine
C.I. Inspection chamber and bends with bricks having Hundred Thirty Two and Ninety
crushing strength not less than 35 Kg/cm2 in cm. 1:5 Three Paise
C.I. Cover with frame (light duty) 455 mm. X 610 mm.
Internal dimensions, total weight of cover with frame
to be not less than 38 Kgs. weight of cover 23 Kg. and
wt. of frame 15 Kg) R.C.C. top slab with 1:2:4 mix(1
cement : 2 coarse sand : 4 graded stone aggregate
mm. size ) foundation concrete 1:5:10 inside plaster
15 mm. thick with cement mortar 1:3 finished smooth
with a floating coat of neat cement on walls & abed
concrete etc. complete (I) inside dimensions, 455 mm.
610 mm. And 450 mm. Deep for single pipe line.
63 Providing and fixing S.W. gully trap with C.I. grating Rupees One Thousand Two
brick masonry chamber and water tight C.I. cover with Hundred Forty Six and Ninety
frame of 300 x 300mm size (inside) with standard Two Paise
(I) square mouth traps.
12.00 (B) 150mm x 100mm size P or R type 1246.92 each
64 Providing and fixing wash basin with single hole for Rupees One Thousand Five
pillar tap with C.I. Or M.S. brackets painted white Hundred Six and Forty Five
including cutting holes and making good the same but Paise
excluding fittings :
(A) Vitreous China
(ii) Flat back wash basin 500mm x 400mm size
11.00 (I) in white color 1506.45 each
65 Providing and fixing C.P. brass waste for wash basin or Rupees Sixty Seven and Ninety
sink (A) 32mm dia One Paise
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
66 Providing and fixing 600 mm. X 450 mm. Beveled edge Rupees Eight Hundred Thirty
mirror of superior glass mounted on 6 mm. Thick A.C, Three and Seventy Three Paise
sheet or plywood sheet and fixed to wooden plugs with
C.P. brass screws and washers.
67 Providing, laying & Jointing in true line and level 110 Rupees Eight Hundred Thirty
mm dia U.P.V.C. SWR type B-pipe conforming to IS- Five and Fifteen Paise
13592-1992 with one and plain and other end socketed
with rubbering & fitting conforming to IS : 14735-1999
of approved make for drainage system pipe line, pipe
shall be jointed with each other with rubber lubricant,
pipe shall be fixed on wall using of PVC clamp of the
size 110mm dia X 149mm length X 145mm high at
every 2000mm center to center or shall be concealed
in wall as directed including necessary fittings such as
bends, shoes etc. including testing of pipes and joints
and jointed with adhesive solvent cement including
cost of all materials.
68 Providing, laying & Jointing in true line and level 160 Rupees Eight Hundred Thirty
mm dia U.P.V.C. SWR type B-pipe conforming to IS- One and Twenty Two Paise
13592-1992 with one and plain and other end socketed
with rubbering & fitting conforming to IS : 14735-1999
of approved make for drainage system pipe line, pipe
shall be jointed with each other with rubber lubricant,
pipe shall be fixed on wall using of PVC clamp of the
size 110mm dia X 149mm length X 145mm high at
every 2000mm center to center or shall be concealed
in wall as directed including necessary fittings such as
bends, shoes etc. including testing of pipes and joints
and jointed with adhesive solvent cement including
cost of all materials.
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
69 Providing and fixing in position cowl vent to pipes : Rupees Three Hundred Eighty
(B) 75 mm dia. Nine and Seventy Four Paise
70 Providing and fixing screw down bib taps of following Rupees One Hundred Eighty Six
size : (A) Brass screw down bib tap polished bright and Eighty Three Paise
71 Providing and fixing Pillar Tap, capstan head, screw Rupees Three Hundred Eight
down high pressure with screws, shanks and back nuts and Seventy Three Paise
72 Providing and fixing brass screw down stop Rupees Two Hundred Five and
(A) 15 mm. Dia Eighty Three Paise
73 Providing and fixing chromium plated brass half turn Rupees Two Hundred Sixty
flush cock of approved quality including fixing in pipe Three and Seventy Seven Paise
line etc. complete. (ii) 25 mm. Dia
74 Providing and fixing C.I. Manhole cover 0.60m x 0.45m Rupees Nine Hundred Fifty Eight
size having weight not less than 35 kgs. and Seventeen Paise
75 Providing and fixing M.S. grills of required pattern to Rupees One Hundred Fifty Five
wooden frames of windows etc. with M.S. flats at and Twenty Six Paise
required spacings and frame around, square or round
bars with round headed bolts and nuts or by screws.
B) ORNAMENTAL GRILL
76 Providing and fixing M.S. grills of required pattern to Rupees One Hundred Four and
wooden frames of windows etc. with M.S. flats at Four Paise
required spacings and frame around, square or round
bars with round headed bolts and nuts or by screws.
(A) Plain Grills
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
77 Painting two coats (including priming coat) on new Rupees One Hundred Twenty
steel and other metal surface with enamel paint, Two and Forty Nine Paise
brushing, interior to give an even shade including
cleaning the surface an even shade including cleaning
the surface of all dirt, dust and other foreign matter.
78 Providing erecting and fixing double coated ISI water Rupees Three and Ninety Five
tank of required capacity each with all necessary Paise
fittings and connection etc. complete on terrace.
79 Drilling of 9 inches dia vertical borehole for garden Rupees One Thousand Four
irrigation including in all strata with required length Hundred Ninety One and
including providing, lawring & laying of 11 inches dia Seventy Seven Paise
PVC casing pipe with pushing complete.
80 Point wiring for Light / Bell with 2-1.5 sq.mm & Rupees Four Hundred Forty Nine
earth wire of 1.5 sq.mm (Green) both are of ISI and Forty Five Paise
marked 1.1 KV grade FRLS PVC insulated multi strand
copper wires up to 10 mtr length , in below type of
pipe erected with 6A Modular type switch / bell push &
accessories and earth continuity of following type,
erected on PVC / Metallic/Wooden box, single
mounting base frame covered with
textured/metallic/white front plate modules erected on
/ in wall / ceiling as per pipe erected, with necessary
Lamp holder/ceiling rose / H.D.Connector as directed.
(f) with medium class Rigid PVC pipe and accessories
erected concealed in wall/ceiling complete, CAT-III
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
81 Point wiring for FAN with 2-1.5 sq.mm & earth wire of Rupees Six Hundred Twenty
1.5 sq.mm (Green) both are of ISI marked 1.1 KV Nine and Twenty Three Paise
Grade FRLS PVC insulated multi strand copper wires
up to 10 mtr length, in below type of pipe erected with
6A Modular type switch and hum free EME step type
electronic fan regulator mounted and accessories with
earth continuity of following type erected on PVC /
Metallic/ Wooden box, single mounting base frame
covered with textured/ metallic/ white front plate
modules erected on / in wall / ceiling as per pipe
erected. with necessary ceiling rose / H.D.Connector as
(f) with medium class Rigid PVC pipe and accessories
erected concealed in wall/ceiling complete CAT-III
82 Point wiring for Individual Plug with & earth wire of 1.5 Rupees Four Hundred Seventy
sq.mm (Green) both are of ISI marked 1.1 KV grade Three and Sixty Nine Paise
FRLS PVC insulated multi strand copper wires up to
mtr length, in below type of pipe erected complete
with Modular type switch & 5 pin Plug erected on PVC
/ Metallic/ Wooden box covered with appropriate front
plate modules erected on / in wall / ceiling as per pipe
erected with following type of accessories.
[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu.
Wire from nearby switchboard/mcb db board
(f) with medium class Rigid PVC pipe and accessories
erected concealed in wall/ceiling complete Cat-III
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
83 Point wiring for Individual Plug with & earth wire of 1.5 Rupees Six Hundred Ninety
sq.mm (Green) both are of ISI marked 1.1 KV grade Seven and Ninety One Paise
FRLS PVC insulated multi strand copper wires up to
mtr length, in below type of pipe erected complete
with Modular type switch & 5 pin Plug erected on PVC
/ Metallic/ Wooden box covered with appropriate front
plate modules erected on / in wall / ceiling as per pipe
erected with following type of accessories.
[II] For 16A Plug and 16 amp switch with 2-2.5
sq.mm Cu. Wire from mcb db board.
(f) with medium class Rigid PVC pipe and accessories
erected concealed in wall/ceiling complete Cat-III
84 Point wiring for Individual Plug with & earth wire of 1.5 Rupees Eight Hundred Eighteen
sq.mm (Green) both are of ISI marked 1.1 KV grade and Ten Paise
FRLS PVC insulated multi strand copper wires up to
mtr length, in below type of pipe erected complete
with Modular type switch & 5 pin Plug erected on PVC
/ Metallic/ Wooden box covered with appropriate front
plate modules erected on / in wall / ceiling as per pipe
erected with following type of accessories.
[III] For 16A Plug and 16 amp switch with 2-4
sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire
from mcb d b board
(f) with medium class Rigid PVC pipe and accessories
erected concealed in wall/ceiling complete Cat-III
85 Point wiring for on board Looped Plug with 6A Modular Rupees Two Hundred Forty One
type switch & 5 pin socket erected on PVC / and Thirty Nine Paise
Metallic/Wooden box, single mounting base frame
covered with textured/ metallic/ white front plate
modules erected on/ in wall/ ceiling with following type
56.00 accessories Cat-III 241.39 Pt.
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
86 Providing following type of Modular Type Accessories Rupees Three Hundred Ninety
mounted with PVC / metallic/ Wooden box, single and Eighty Seven Paise
mounting base frame covered with textured /
metallic/white front plate, modules erected with
necessary connections as per site situation directed by
Engineer In charge.
(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole
1.00 Modular MCB Switch Cat-III 390.87 Ea.
87 Providing and erecting Mains with 1.1 KV grade FRLS Rupees Seventy Eight and
PVC insulated ISI marked stranded Copper conductor Seventy Eight Paise
wire in following type of pipe to be erected concealed
in /flushed on wall/ ceiling, with 1.5 sq. mm copper
conductor FRLS PVC insulated stranded wire of green
colour for earth continuity of following size
(A) With medium class Rigid PVC pipe and accessories
(b) 2 wire 2.5 sq. mm
88 Supplying and erecting LED indoor fittings with LEDs of Rupees One Hundred Sixty Five
wattage 0.2 Watt to 0.5 Watt assembled on single and Sixty Four Paise
MCPCB, with housing used as a heat sink shall be
made of thick sheet Steel conforming to IS: 513/
CRCA/ aluminium die cast powder coated and high
U.V. & corrosion resistance with diffuser with company
mark/name 160V to 270V, Power Factor more than
Luminaire efficacy > 85 lumens/watt, LED LED driver
efficiency > 85 % (fitting required LM-79 & LM-80
Certificates) (NOTE: Below description have shown
ranges of Wattage capacity of LED fittings. The
Engineer incharge may select any wattage capacity
between the ranges shown.)
(A) Tube Light with integral driver
(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
89 Supplying and erecting LED indoor fittings with LEDs of Rupees Three Hundred Seventy
wattage 0.2 Watt to 0.5 Watt assembled on single Three and Seventy Paise
MCPCB, with housing used as a heat sink shall be
made of thick sheet Steel conforming to IS: 513/CRCA/
aluminium die cast powder coated and high U.V. &
corrosion resistance with diffuser with company
mark/name 160V to 270V, Power Factor more than
Luminaire efficacy > 85 lumens/watt, LED LED driver
efficiency > 85% (fitting required LM-79 & LM-80
Certificates) (NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The
Engineer incharge may select any wattage capacity
between the ranges shown.)
(A) Tube Light with integral driver
(iv) 22-24 Watts, Surge - 2KV, IP-20, conventional
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
90 Supplying and erecting LED indoor fittings with LEDs of Rupees Two Hundred Twenty
wattage 0.2 Watt to 0.5 Watt assembled on single and Eighteen Paise
MCPCB, with housing used as a heat sink shall be
made of thick sheet Steel conforming to IS:
513/CRCA/aluminium pressure die cast powder coated
and high U.V. & corrosion resistance with diffuser
housed in aluminium casted body with company
mark/name 160V to 270V, Power Factor more than
Luminaire efficacy > 85 lumens/watt, LED driver
efficiency > 85 % (fitting required LM-79 & LM-80
Certificates) (NOTE: Below description have shown
ranges of Wattage capacity of LED fittings. The
Engineer incharge may select any wattage capacity
between the ranges shown.)
(A) Square/ Circular shaped Surface/ Recessed Mount
Downlight with provision for spring loaded mounting
clips complete.IP20
31.00 (i) 5-9 watts, Surge-2 KV Cat-III 220.18 Ea.
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
91 Supplying and erecting LED indoor fittings with LEDs of Rupees One Thousand Seven
wattage 0.2 Watt to 0.5 Watt assembled on single Hundred Ninety Four and
MCPCB, with housing used as a heat sink shall be Seventy Seven Paise
made of thick sheet Steel conforming to IS: 513/
CRCA/ aluminium pressure die cast powder coated and
high U.V. & corrosion resistance with diffuser housed
in aluminium casted body with company mark/name
160V to 270V, Power Factor more than 0.9, THD <
15%, CCT 3000K to 6500K, Luminaire efficacy >
lumens/watt, LED driver efficiency > 85 % (fitting
required LM-79 & LM-80 Certificates) (NOTE: Below
description have shown ranges of Wattage capacity of
LED fittings. The Engineer incharge may select any
wattage capacity between the ranges shown.)
(B) LED Panel Light with provision for Plane front
frame with translucent cover fixed to housing
(vi) 36 watts, 24" x 24", Surge- 2KV
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
92 Supplying and erecting LED street light / Flood light Rupees Four Thousand Nine
fittings with High power White LEDs wattage of 3 Watt Hundred Ninety Seven and Forty
and above assembled on single MCPCB, efficiency more Eight Paise
than 130 lm/w and corrosion free High pressure die
cast aluminum housing with smooth finish powder
coated and heat sink extruded aluminium with diffuser
and Polycarbonate optics/ lenses, with toughened glass
with company mark/name engraved or embossed
to 270 V, Power Factor more than 0.95, THD < 10 %,
CCT 3000K to 5700K,Uniformity ratio > 0.45,
Luminaire efficacy > 100 lumens/watt. LED driver
efficiency > 85%. (fittings required LM-79 & LM-80
certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The
Engineer incharge may select any wattage capacity
between the ranges shown.)
(A) Street Light (IP-65), Surge protection -4KV
integral and, Light must have 440VAC line supply with
over-voltage protection. Cat-II
2.00 (ii) above 48 to 60 Watts Cat-III 4997.48 Ea.
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
93 Supplying and erecting LED street light / Flood light Rupees Seven Thousand Two
fittings with High power White LEDs wattage of 3 Watt Hundred Sixty Six and Ninety
and above assembled on single MCPCB, efficiency more Five Paise
than 130 lm/w and corrosion free High pressure die
cast aluminum housing with smooth finish powder
coated and heat sink extruded aluminium with diffuser
and Polycarbonate optics/ lenses, with toughened glass
with company mark/name engraved or embossed
to 270V, Power Factor more than 0.95, THD < 10%,
CCT 3000K to 5700K, Uniformity ratio > 0.45,
Luminaire efficacy > 100 lumens/watt. LED driver
efficiency > 85 %. (fittings required LM-79 & LM-80
certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings. The
Engineer incharge may select any wattage capacity
between the ranges shown.)
(B) Flood Light (IP-65), Surge protection -4KV integral
and, Light must have 440V AC line supply with over-
voltage protection.
2.00 (iv) above 90 to 120 watts Cat-III 7266.95 Ea.
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
94 Supplying and erecting LED street light / Flood light Rupees Four Thousand Eight
fittings with High power White LEDs wattage of 3 Watt Hundred Nineteen and Seventy
and above assembled on single MCPCB, efficiency more Two Paise
than 130 lm/w and corrosion free High pressure die
cast aluminum housing with smooth finish powder
coated and heat sink extruded aluminium with diffuser
and Polycarbonate optics/ lenses, with toughened glass
with company mark/name engraved or embossed
to 270V, Power Factor more than 0.95, THD < 10 %,
CCT 3000K to 5700K, Uniformity ratio > 0.45,
Luminaire efficacy > 100 lumens/watt. LED driver
efficiency > 85%. (fittings required LM-79 & LM-80
certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings. The
Engineer incharge may select any wattage capacity
between the ranges shown.)
(C) Post Top Lantern LED fitting comprises of finish
cast aluminum spigot and spun aluminum canopy fixed
with opal polycarbonate, pipe arrangement for vertical
mounting driver and accessories wired upto terminal
2.00 block. IP 65 (ii) 32-40W Cat-lll 4819.72 Ea.
95 (b) LED Bollard fittings of minimum height 600 mm & 3161.30 Rupees Three Thousand One
dia. 100mm having polycarbonate clear/ milky diffuser Hundred Sixty One and Thirty
mounted on 3mm thick aluminium finished powder Paise
coated pipe with base plate 160x160mm with erection
by M8x75mm fastner with required RCC foundation.
IP65 for 15watt, surge 4kv cat-III
96 Providing Approved make Triple Pole Metal Clad Switch Rupees Five Thousand Eight
Fuse Unit 415/500V. with HRC fuse of suitable load Hundred Twelve and Fifty Five
and neutral link confirming to IS. Paise
(c) 100 A/125A Cat.III
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
97 Erection & connection charges for 32A/ 63A / 100A Rupees One Hundred Thirty
HRC TPN as following Eight and Thirty Seven Paise
(b) Erection on New angle iron frame duly painted
98 Providing and erecting Approved make Four pole Rupees Six Thousand One
moulded case circuit breaker having breaking capacity Hundred Seventy Three and
ICU of 25 KA. at 415 V, having normal current rating Twelve Paise
up to 25 A to 100A. with Fixed thermal & magnetic
release suitable to work on A.C. supply 50 c/s. with all
internal connections, spreader tinned copper &
complete erected in existing 16 G.M.S. housing.
5.00 ICS=100% of ICU only Cat III 6173.12 Ea.
99 Supplying and erecting triple pole & neutral 440V / Rupees One Thousand Nine
500V panel mounting Copper Busbars with four equal Hundred Sixty One and Forty
Nos. of electrolyte bus having current density not more Two Paise
than 1.6 Amp. / sq.mm (Rated current / cross section
area) duly wrapped with colour insulating tape for
phase sequence of following current carrying capacity,
erected with necessary bus bar supports /insulators,
main cable socket to each bar, erected in existing
cubical panel with necessary connections.
(A) Suitable for 100 Amp. Capacity
100 providing and erecting Miniature circuit breaker single Rupees One Hundred Twelve
pole 6A to 25A suitable to operate on 240 V A.C. and Eleven Paise
system and having breaking capacity 10 KA to be
erected in existing box. confirming to IS 8828/1996
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
101 Providing & erecting 240V MCB double pole switch for Rupees Two Hundred Ninety
motor & inductive load (C Curve) having 10 KA Nine and Ninety Seven Paise
breaking capacity & confirms to IS : 8828 in existing
box having following capacity
(a) 6 to 32 Amp. Cat.III
102 Providing & erecting 415 V MCB Four Pole for Motor & Rupees Five Hundred Ninety
Inductive Load (C Curve) having 10KA breaking Five and Ninety Paise
capacity & confirms to IS :8828 in existing box having
following capacit
(a) 6 to 32 A. Cat.III
103 Providing & erecting 415 V MCB Four Pole for Motor & Rupees Seven Hundred Thirty
Inductive Load (C Curve) having 10KA breaking Seven and Thirty Paise
capacity & confirms to IS:8828 in existing box having
following capacity (c) 63 Amp. Cat.III
104 Providing & erecting 415V MCB three Pole for Motor & Rupees Five Hundred Eighty
Inductive Load (C Curve) having 10KA breaking Seven and Eighty Two Paise
capacity & confirms to IS:8828 in existing box having
following capacity (a) 6 to 32 Amp. Cat.III
105 Providing and erecting Sheet Steel powder coated MCB Rupees One Thousand One
distribution board - flush / surface mounted fitted with Hundred Fifty Two and Forty
busbar, neutral link, earth bar and DIN rail, Conforms One Paise
to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to
house appropriate nos. of MCBs. (The DBs should be
used of same company of MCB to be used) suitable for
(A) single phase incoming and horizontal single phase
outgoing (b) sheet steel double door (IP-43) (iii)
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
106 Providing and erecting Sheet Steel powder coated MCB Rupees Two Thousand Nine
distribution board - flush / surface mounted fitted with Hundred Thirteen and Eighty
busbar, neutral link, earth bar and DIN rail, Conforms Five Paise
to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to
house appropriate nos. of MCBs. (The DBs should be
used of same company of MCB to be used) suitable for
(B) three phase incoming and single phase horizontal
type outgoing Per phase isolation type (PPI)
(b) sheet steel double door
107 Providing and erecting Sheet Steel powder coated MCB Rupees Three Thousand Four
distribution board - flush/ surface mounted fitted with Hundred Twelve and Seventy
busbar, neutral link, earth bar and DIN rail, Conforms Nine Paise
to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to
house appropriate nos. of MCBs. (The DBs should be
used of same company of MCB to be used) suitable for
(B) three phase incoming and single phase horizontal
type outgoing Per phase isolation type (PPI)
(b) sheet steel double door
108 providing and erecting Approved make RCCBs Rupees Two Thousand Two
conforming to IS: 12640 and having sensitivity of 30 Hundred Thirty Five and
mA and Short Circuit withstand capacity of 10 KA and Thirteen Paise
suitable for operation on single phase 240 V,50Hz.
having characteristic of quick action & tripping with all
advance feature & do not incorporate any electronic
component. for following Max. rating erected as
13.00 (ii) 40Amps. DP Cat. III 2235.13 Ea
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
109 Providing and erecting Approved make RCCBs Rupees Two Thousand Six
conforming to IS: 12640 and having sensitivity of 30 Hundred Thirty Seven and
mA and Short Circuit withstand capacity of 10 KA and Eleven Paise
suitable for operation on 3 phase and neutral 415V,
50Hz. having characteristic of quick action & tripping
with all advance feature & do not incorporate any
electronic component for following Max. rating erected
as directed. (ii) 40Amps. FP Cat-ii
110 Providing and erecting metallic vitrified danger notice Rupees Sixty Nine and Sixty
board as per language suggested by engineer incharge Nine Paise
for MEDIUM VOLTAGE installation to be erected as per
111 Providing and erecting Annealed bare Copper wire 8 to Rupees Seven Hundred Ninety
16 SWG. Four and Eighty Seven Paise
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
112 Supplying & erecting earth pit of minimum bore Rupees Four Thousand Five
dia.150mm size approved make Earthing Electrode Hundred Ninety One and Forty
consisting Pipe-in-Pipe Technology as per IS 3043- Six Paise
1987 made of corrosion free hot dipped G.I.Pipes
having Outer pipe dia of 50mm having 80-200 Micron
galvanising, Inner pipe dia of 25 mm having 200-250
Micron galvanising, connection terminal dia of 12mm
with constant ohmic value surrounded by highly
conductive compound with high charge dissipation
suitable for following type of applications with chamber
and heavy duty cover. (approved make OEM has to
submit test certificate) & having back filling compound
of (B) Inner chemical (CCM Compound)- Resistivity:-
0.2/ meter testing as per IEC 62561-2017, Voltage
drop:- < 1 volt at no load & dry form, Sulphar content:-
<2% (C) Back fill Compound :- Earthing compound
should be capable to retain moisture for long time
Necessary test report must be submitted.
(a) For Electrical Installation up to 440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
113 Supplying & erecting earth pit of minimum bore Rupees Eight Thousand Six
dia.150mm size approved make Earthing Electrode Hundred Thirty Six and Fifty
consisting Pipe-in-Pipe Technology as per IS 3043- One Paise
1987 made of corrosion free hot dipped G.I.Pipes
having Outer pipe dia of 50mm having 80-200 Micron
galvanising, Inner pipe dia of 25 mm having 200-250
Micron galvanising, connection terminal dia of 12mm
with constant ohmic value surrounded by highly
conductive compound with high charge dissipation
suitable for following type of applications with chamber
and heavy duty cover. (approved make OEM has to
submit test certificate) & having back filling compound
of (B) Inner chemical (CCM Compound)- Resistivity:-
0.2/ meter testing as per IEC 62561-2017, Voltage
drop:- < 1 volt at no load & dry form, Sulphar content:-
<2% (C) Back fill Compound:- Earthing compound
should be capable to retain moisture for long time
Necessary test report must be submitted
(c) For Electrical Installation covering Transformer
Neutrals, Lightning arrester Earthing, A.C.Plant &
Sensitive Computer System (like Automation, SCADA)
i.e independent Earthing in normal soil.
Length of Pipe: 3.00 mtrs
Back filling Compound: 2 nos Bags of 25 Kg.
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
114 Providing & erecting weather proof, dust & vermin Rupees Eleven Thousand Four
proof, floor mounted front operated outdoor type Hundred Sixty Six and Fifty
double door cubical panel board necessary IP-54 and Three Paise
above protection as per approval from engineer
incharge made from 14 SWG thick CRC M.S. sheet for
outer body & doors, 16 SWG thick CRC M.S.sheet for
internal partitions with necessary accesories
supporting angles/ flats channel including cutting,
bending, drilling, welding, riveting with internal
partitions & cable alley as per requirements &
instruction of engineer-in-charge with erection of
supplied switch gears, BUSBARS, suitable size of inter
connecting PVC copper wire / copper-aluminium strips,
rubber grommets, rib, bakelite control fuses/MCB for
measuring instruments, earth bus & earth bolts,
foundation flange - bolts-base Plates, sufficient nos. of
hinged doors, handles with locking arrangement and
rubber gasket,heavy duty end terminal
connection,danger notice board,necessary
ventilation,earthing strip complete. The Panel shall be
painted with epoxy powder coating. (The rates
excludes the cost of switchgears, bus bars, inter
connecting mains & Copper Aluminium strips, meters,
Fuses etc. The dimension shall be measured excluding
base beams) The panel shall be supplied with following
approved manufacturers with following size.
1.50 (A) locally fabricated panel board 11466.53 sq.mtr.
Providing mmerecting
and depth XLPE (IS:7098) (I)-88 ISI Rupees Ninety and Ninety
armoured cable Aluminium conductor for 1.1 KV. to be Paise
laid on wall with necessary clamps or in existing trench
/ pipe of following size of cables.
(B) 2 core 6 Sq.mm
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
116 Providing and erecting XLPE (IS:7098)(I)-88 ISI Rupees One Hundred Fifty One
armoured cable multistrand Aluminium conductor for and Fifty Paise
1.1KV. to be laid on wall with necessary clamps or in
existing trench/ pipe of following size of cables
(A) 4 core 16 Sq. mm
117 Providing and erecting XLPE (IS:7098)(I)-88 ISI Rupees Three Hundred Sixty
armoured cable multistrand / Solid Copper conductor Two and Fifty Nine Paise
for 1.1 KV. to be laid on wall with necessary clamps or
in existing trench/ pipe at road crossing or floor of
following size of cables. (B) 4 core 4 Sq. mm
118 Providing and, fixing heavy duty flange type brass Rupees Thirty Three and Thirty
cable gland with rubber ring for PVC insulated Three Paise
armoured cable complete with out going tails,
insulating tape etc for following size of cables.
(A) 2 to 4 core 2.5 / 4 Sq. mm
119 Providing and, fixing heavy duty flange type brass Rupees Thirty Eight and Thirty
cable gland with rubber ring for PVC insulated Eight Paise
armoured cable complete with out going tails,
insulating tape etc for following size of cables.
(B) 2 to 4 core 6 Sq. mm
120 Providing and, fixing heavy duty flange type brass Rupees Forty Seven and Forty
cable gland with rubber ring for PVC insulated Seven Paise
armoured cable complete with out going tails,
insulating tape etc for following size of cables.
(D) 2 to 4 core 16 Sq. mm
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
121 Solder less crimping type Aluminium lugs conforming Rupees Six and Six Paise
to IS suitable for cable of following size evenly crimped
with high pressure tool & connected to switchgear
terminals with brass/cadmium plated nut bolts in an
approved manner.
122 Solder less crimping type Aluminium lugs conforming Rupees Fifteen and Fifteen Paise
to IS suitable for cable of following size evenly crimped
with high pressure tool & connected to switchgear
terminals with brass/cadmium plated nut bolts in an
approved manner.
123 Solder less crimping type Copper lugs conforming to IS Rupees Eight and Eight Paise
suitable for cable of following size evenly crimped with
high pressure tool & connected to switchgear terminals
with brass/cadmium plated nut bolts in an approved
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
124 Supply, Installation, Testing and Commissioning of Rupees Two Thousand Eight
suitable sweep, BEE 5 Star rated, Ceiling fan with Hundred Eighty Five and Fifty
Brush Less Direct Current (BLDC) permanent ferrite Seven Paise
magnet Motor, class of insulation: B, Rust free
nos.Aluminium blades, 2 nos. canopies, shackle kit
with earthing provision, copper winding, Power factor
not < 0.9, Service Value (CMM/W) minimum 6.85, Air
delivery minimum 215 CMM, 350 RPM,230v (tolerance
as per IS : 374-2019), THD < 10%, with remote unit
for Speed Control and all remaining accessories
including safety pin, nut bolts, washers, temperature
rise = 75 degree C (Max.), suitable for 140 to
Voltage and rectifier circuit with surge, over current
and overload protection, 50 Hz, Single phase AC
Supply, earthing etc. Complete as required. [Make
shall be approved by Engineer in Charge]
125 Supplying & erecting fan hook box of 10 mm M.S. Rupees One Hundred Eight and
round bar bounded to the RCC bars up to 50mm length Seven Paise
each side and pierced through a 16 Gauge M.S. box /
Heavy Duty PVC box complete erected concealed in
Ceiling with necessary finishing.
126 Providing 2.5mm. thick laminated acrylic sheet to Rupees Eighteen and Eighteen
cover the fan hook or Fan box. Paise
127 Supplying & erecting single phase approved make Rupees Two Thousand Fifty Four
industrial exhaust fan suitable for medium duty ring and Thirty Four Paise
mounted low noise operation suitable for medium duty
having following dia size and maximum speed in RPM
[A] 305 mm dia 900 RPM Cat.II
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
128 Providing suitable M.S. louver shutter of the Exhaust Rupees Three Hundred Sixty
fan. Eight and Sixty Five Paise
129 Supplying & erecting electro galvanised G.I. wire micro Rupees Six Hundred Thirty Four
mesh jali cover of grade 304 required size with suitable and Twenty Eight Paise
wooden frame duly fitted in wall outside of exhaust fan
for insect protection.
130 Providing recess in wall or window frame suitable for Rupees One Hundred Eighty
erection of Exhaust fan complete with plastering and Nine and Eighty Eight Paise
colour washing to match the colour of the wall or
window complete with expanded metal in order to
render the fitting in accessible and the room water-
20.00 proof. 189.88 Ea.
131 Supplying & erecting approved make SMC press Rupees Five Hundred Fifteen
moulded composite FRP. loop-in, loop-out approx. and Ten Paise
2mm thick box complete with Bakelite connector strip
5way (3P+N+E), DIN rail for mounting mob & hinged
doors as per requirement having locking arrangements
with mounting clamp with nuts, bolts & washers
suitable for erection on pole with cable clamps & earth
bolt of following size of box.
12.00 (B) 250mm x 200mm x 100mm [deep] 515.10 Ea.
132 Supplying and erecting B class galvanised iron pipe 32 Rupees Three Hundred Forty
mm outside dia 45 cm long duly welded on 20 cm x 20 Three and Forty Paise
cm x 3 mm thick M.S. base plate, erected on wall or
corner for mounting street light luminaire with
necessary hardware materials duly painted.
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
133 Providing and erecting Inverter based approved make Rupees Forty Five Thousand
split air-conditioning unit consisting of condensing unit Nine Hundred Eighty and
with variable speed fan motor, inverter type Twenty Five Paise
hermetically sealed rotary compressor with accessories
etc. duly connected separately erected evaporating
unit and blower motor with its accessories by means of
extra supplied proper insulated copper tubing, drain
PVC pipes suitable for (cost includes Eco Friendly green
gas charging and 15A plug top & Remote Control & MS
Stand) with necessary core cutting.
(2) For 4/5 Star Rating of current year
(B) for 1.5 ton capacity- Premium Cat-iii
134 Providing & Erecting full SS Body (SS 304) Split type Rupees Fifty One Thousand One
water cooler having storage capacity 160 to 175 Ltr. Hundred Forty Three and Thirty
(Tank SS 304) & Cooling capacity 150 ltr. Per hour @ Seven Paise
an ambient temp of 350C. The outlet temp. of the
water should drop by 150C within a hour, The water
cooler should be comprising of hermetically sealed
Reciprocating compressor with R134A, fan motor,
Copper Condensing unit with company fabricated
Outdoor Unit water tank surrounded by evaporating
coil, thermostats, relay etc. complete with necessary
copper tube & Insulation, M.S Chanel Stand with
Painting for water tank & M.S. Powder Coated Stand
for Outdoor unit with Installation.
With DPELCB and 4 Way DB Box with accessory Three
core Cord for connection.
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
135 Supplying & erecting reverse osmosis (RO) water Rupees Seventy Eight Thousand
purification system with M.S. powder coated pedestal Sixty One and Eighty Nine Paise
frame, prefilter housing carbon filter suitable buster DC
pump, auto low & high pressure switches with
following size of LPH capacity & erected as directed
[E] 200 LPH with 1 phase/ 3 phase Raw water pump
of 1000LPH @ 2.5kg/cm2 (1N0 - Kirloskar/CRI/Lubi),
Dual media filter 10" x 54" (1 No), Micron catridge
filter 20" x 2.5" -(1No), High pressure pump 1000LPH
@ 10kg/cm2 - (1No - Shimge /CRI /Lubi) , RO
Membrane housing with RO membrane of 40*40 - (
No), RO pressure tube 4"x1E- (1No), 0-1200 LPH
Rotameter-(2 Nos). Recovery Rate 50%.
136 Supplying and erecting Direct on line starter with 30 Rupees Two Thousand One
Amp. (resistive @ 230v) power relay and with 2 to 5/ 4 Hundred Sixty Eight and Forty
to 10 / 8 to 20 amp. Range C.T. Operated electronic Seven Paise
overload relay in engineering grade plastic enclosure
for 3 ph 415v 50 HZ A.C. motor up to 7.5 HP with high
voltage protection (above 480 v) and under voltage
protection (below 330 v) current sensing single
phasing protection. Reverse phasing protection,
inverse current characteristic overload protection with
indication for On, OL, HV, LV SPP in a single unit with
feather touch start / stop push button, high
temperature with standing Bakelite terminals complete
erected on P.W. Block with necessary connection.
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
137 Providing & erecting open well horizontal mono block Rupees Eighteen Thousand
pump set with cast iron body, complete for three Seven Hundred Forty Six and
phase submersible motor having Sixty One Paise
[D] For 5 HP 3 phase open well horizontal mono block
pump set suitable for 1350 LPM to 310 LPM @ 10 to
Mtr head suitable for 50/65 mm dia delivery pipe
138 Supplying & erecting approved make Automatic liquid Rupees Two Thousand Three
level controller 6A. with sensor testing as per Hundred Fifty Five and Thirty
instruction of Engineer in charge on site complete with Two Paise
wiring connection with existing wires , with copper
conductor from pump to upper and lower tank.
139 Supplying submersible pump set suitable for bore of Rupees Twenty Six Thousand
100 mm. dia. or more having three phase motor Eight Hundred Ninety Four and
capacity not more than 5 H.P. with following capacity. Twenty Eight Paise
(A) (25 stage) 120 to 125 LPM discharge at 155 to
mtrs. head respectively suitable for 50 mm dia.
delivery pipe Cat.III
140 Lowering of submersible motor pump set at the depth Rupees Two Thousand Five
of following, complete with required. Nos. and size of Hundred Sixty Eight and Forty
casing pipes erected by means of proper chain pulley Three Paise
block & pipe wrenches after checking of threads of
each pipe with coupling to take the load of the pump
set and pipe assembly filled up with water
(B) Above 60 mtrs. and Up to 120 mtrs.
1.00 2568.43 Per Job
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
141 Lowering of submersible motor pump set at the depth Rupees Eight Hundred Fifty Six
of following, complete with required. Nos. and size of and Forty Eight Paise
casing pipes erected by means of proper chain pulley
block & pipe wrenches after checking of threads of
each pipe with coupling to take the load of the pump
set and pipe assembly filled up with water
(D) For Open well Horizontal submersible pump set for
1.00 sump well (i) 1 HP to 5 HP 856.48 Per Job
142 Providing and erecting ISI marked PVC insulated PVC Rupees One Hundred Forty Six
Sheathed Flat flexible Submersible copper cable and Forty Five Paise
approved make of following Size. (C) 3 Core x 4 Sq.
Add G.S.T. @ 18%
One percent of the Estimated cost of work put to tender shall be recovered from the running bills of the contractor as testing charges,
after deducting the cost of material proposed in scheduled-A at basic rate. One percent labour cess will be deducted from contractor’s
I/ We am/are willing to carry out the work at _____________________% above / below _____________________________%
below / above the estimated rates mentioned above amount of my / our tender works out as under :
Estimated amount put to tender : Estimated amount put to tender :
Item Quantities Item Descrption Estimated Rates Unit Total Amount
Item Quantities Item Descrption Estimated Rates Unit Total Amount
No. Estimated according to
but may be in Figure in Words estimated
more or less quantities.
1) All the work shall be carried out as per MOST specification and specification on the division or as directed.
2) Rates quoted includes clearance of site (prior to commencement of work and at its closed) in all respects and held gross for under all
conditions, site moisture weather etc.
3) In RCC item when there is change in grade of concrete mix or change in consumption of cement as per actual mix design then the difference in
consumption of cement shall be deducted from the rate of original item valued at the star rate as mentioned in tender. However no extra
payment shall be made for use of additional Quantity of cement as per actual concrete mix design. Concrete mix design shall be done in GERI
laboratory only.
4) The Contractor shall exhibits a board as per Govt. circular No. 2DK – 3277 / 1657 N Dt. 26–01-73 with detail of specification and details of
work and amount involved at site without any payment as directed by the Engineer in charge.
5) Testing of materials be as per statement attached with the Specifications, the materials shall be tested in G.E.R.I. Bill for testing shall be paid
by the Executive Engineer and 1% of the (one percent) of amount put to tender after shall be recovered from the running account bills of the
works. (As per G.R. (R&B) Deptt., No. TNC/1085/4/C dtd. 20.12.91.
6) The contractor shall quote even "NIL" if no reduction is proposed.
7) One precent of estimated cost put to tender for this work shall be recovered from the contract payments as "LABOUR CESS". In terms of the
Gujarat Government Gazette Extra ordinary dated 12.12.04. Implementation of building and other construction workers regulation of
equipments and conditions of service Act-1996)
8) Photographs of before work and after work will be submitted by the contractor at the time of each bill submission.
9) The contractor is solely responsible to bare all applicable taxes. I.e. GST etc. and department will not entertain any contractor representation
to reimburse any financial burden due to applicable taxes : i.e. GST etc.
Signature of contractor MUNICIPAL CORPORATION
PORBANDAR MUNICIPAL CORPORATION
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
1. SBD.pdf
2. Mile Stone Dates and Tender Nivida.pdf
3. Schedule - B.pdf
4. TEST REQUIRE FOR CONSTRUCTION MATERIAL.pdf
5. Comperative Statement.pdf
6. Qualification Criteria.pdf
7. Specification Index.pdf
8. Special Conditions.pdf
9. Drawings.pdf
10. Paripatra.pdf
11. MAKE LIST - civil.pdf
12.MAKE LIST - Electrical .pdf
13 MAKE LIST -Plumbing.pdf
A BUILDING SPECIFICATIONS.pdf
B ROAD WORK SPECIFICATIONS.pdf
C ELECTRIC SPECIFICATION.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .