Annual plan-Edapal GP Pr No. 59/2023-24-RENOVATION OF VETERINARY DISPENSARY IN WARD 13

Amount

veterinary dispensary

OD192491/2023-2024:Engaging labour/helper for general works like cleaning,removal debris, etc as per directions of departmental staff

15.60:Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

OD192505/2023-2024:Providing and laying Ceramic anti skid floor tiles of size 300X300 mm (thickness to be specified by the manufacture )of 1st quality conforming to IS :15622, of approved make ,in collars such as White ,Ivory , Grey ,Fume Red Brown ,laid on 20 mm thick cement mortar 1:4 (1 cement :4 Coarse sand ),including pointing the joints with white cement and matching pigments etc. complete.

OD192507/2023-2024:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by the Engineer in Charge ) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade , 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15 - 18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer In Charge. The sheet shall be fixed using self drillings / self tapping screws of size (5.5 X 55mm) with EPDM seal, complete up to any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

11.36:Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD208652/2023-2024:Manufacturing supplying and fixing Name board of size 180cmx90cm or near in sizes for offices name and details as per standard practice using GI square tube frame of 40x40x1.6mm thk with holding hooks and fittings as required over the frame fix neatly 4mm thk Aluminum composite panel of approved colour and grade. The letters and logos are made with good quality weather proof matt finish acrylic vinyl stickers cut neatly in CNC machine and paste on the ACP sheet as per approved design and instruction from the departmental officers including all materials fixing charges painting the frame, labour conveyance etc complete

E. ARAVINDAKSHAN

Bidder Name

Mohamed iqbal A.

E. ARAVINDAKSHAN