Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹23.4 LAccepted-AOC GARRISON ENGINEER GE NORTH BINNAGURI | JALPAIGURI | WEST BENGAL | 735232 | L-1 | Accepted-AOC Being L-1 | |
| 2 | L-2₹27.0 L+₹3.1 L (13.1%)Rejected-Finance NH 31 GAIRKATA PO SAKOAJHORA DIST JALPAIGURI W B PIN 735212 | JALPAIGURI | WEST BENGAL | 735212 | L-2 | Rejected-Finance Being L-2 | |
| 3 | L-3₹30.0 L+₹6.1 L (25.4%)Rejected-Finance P O BINNAGURI 735203 DISTT JALPAIGURI W B | JALPAIGURI | WEST BENGAL | 735203 | L-3 | Rejected-Finance Being L-3 | |
| 4 | L-4₹30.7 L+₹6.8 L (28.5%)Rejected-Finance NEAR KRIPAN TCP GATE PO BINNAGURI DIST JALPAIGURI PIN 735203 W B | JALPAIGURI | WEST BENGAL | 735203 | L-4 | Rejected-Finance Being L-4 | |
| 5 | L-5₹32.9 L+₹9.0 L (37.5%)Rejected-Finance | L-5 | Rejected-Finance Being L-5 |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
16 Jun 2023, 10:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH BINNAGURI
GE North Binnaguri Post Binnaguri Dist Jalpaiguri West Bengal PIN - 735232
REPAIR/REPLACEMENT OF STREET/SECURITY/ PERIMETER LIGHTS/HIGH MAST LIGHT FITTINGS AND ALLIED WORKS AT NORTH AND CENTRAL ZONE AREA UNDER GE NORTH BINNAGURI
2023_MES_596414_1
NIT NO. 8701 / 01 / 2023-24 / 03 / E8
Open Tender
Civil Works
Item Rate
270 days
BINNAGURI CANTONMENT
Class D Category b i
8 documents required · 8 mandatory
₹500
Yes
GE NORTH BINNAGURI
₹96,000
Yes
26 Jun 2023
18 May 2023
17 Jun 2023
18 May 2023
16 Jun 2023
2 Jun 2023
Amount
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations of poles and taking out under ground cable etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and as directed.
Returning, filling in, including spreading, leveling, and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and as directed.
Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.
Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and leveling complete all as specified and as directed .
Supply and laying sub class B bricks of size 230x125x73mm (+/- 10% tolerance limit) for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.
Laying only old burnt old size bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over electric cable for protection complete all as specified and as directed. Note : Old bricks obtained from item No. 9 shall be reused.
M&L for horizontal boring of holes, under road/ pavement / hard standing etc. not exceeding 10 Meters in length, in any type of soil, suitable for passing through up to 50 mm bore, galvanised steel tubing complete all as specified and as directed. Notes :- (a) Pipe shall be measured and paid separately under relevant item of this schedule. (b) Removal of surplus soil shall be deemed to be included in the Unit Rate.
Supplying and fixing Galvanised mild steel pipe/tubing, light grade complete with all fittings of 50 mm bore dia, laid in trenches / under roads, fixed to poles/ walls with Mild steel clamps, bolts, nuts and washers as in cable protection complete all as specified and as directed.
Disconnecting & taking out defective under ground LT cable from trenches, pole, pipe, floor, wall etc including bricks, GI pipes and removing from work site of unserviceable material and keep serviceable material for reuse in safe custody for any size complete all as specified and as directed. Note: Excavation/earth work shall be measured & paid separately under relevant item of this schedule)
Supply, laying, jointing and testing LT underground electric power cable crossed linked XLPE insulated, two or more core galvanized steel strip or wire armored / PVC insulated armored cable heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 16 sqmm 4 core laid in trenches / laid under floor or fixed to walls/on poles / in ducts or passing through pipes etc fixing and connecting accessories such as Aluminium cable lugs, cable glands, nut, bolts, washers etc complete all as specified and as directed. Note: Earth work, excavation, GI pipe, sand cushioning and protection brick shall be measured and paid separately under appropriate items.
Supply, laying, jointing and testing LT underground electric power cable crossed linked XLPE insulated, two or more core galvanized steel strip or wire armoured / PVC insulated armoured cable heavy duty electric cable with aluminium conductor 1100 volts grade, cross-sectional area 10 sqmm 2 core laid in trenches / laid under floor or fixed to walls/on poles / in ducts or passing through pipes etc fixing and connecting accessories such as Aluminium cable lugs, cable glands, nut, bolts, washers etc complete all as specified and as directed. Note: Earth work, excavation, GI pipe, sand cushioning and protection brick shall be measured and paid separately under appropriate items.
Supply and fixing in repairs street light bracket made out of GI pipe light grade 40 mm dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.5 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 40 x 6 mm suitable length 2 Nos complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer complete all as specified and as directed.
Material and labour for LED street light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen equal to/greater than 4500 lumen, system wattage 45 Watt, Ingress protection IP-66 with all accessories including taking down unserviceable light fitting and removing from site complete all as specified and directed.
Material and labour for LED street light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen equal to/greater than 6000 lumen, system wattage 60 Watt, Ingress protection IP-66 with all accessories including taking down unserviceable light fitting and removing from site complete all as specified and as directed.
Material and labour for LED street light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen equal to/greater than 9000 lumen, system wattage 90 Watt, Ingress protection IP-66 with all accessories including taking down unserviceable light fitting and removing from site complete all as specified and as directed.
Material and labour for LED flood light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen equal to/greater than 10000 lumen, system wattage 100 Watt, Ingress protection IP-66 with all accessories including taking down unserviceable light fitting and removing from site complete all as specified and as directed.
Material and labour for LED flood light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen equal to/greater than 20000 lumen, system wattage 200 Watt, Ingress protection IP-66 with all accessories including taking down unserviceable light fitting and removing from site complete all as specified and as directed.
Material and labour for digging out incoming and outgoing cables of any sizes from loop near junction box/ feeder pillar box in tranches, cutting burnout uninsulated portion of cable and rectify the defect and relaying the XLPE cable under ground aluminium conductor in trenches and returning and filling the excavated soil and connecting the cables with bus bars including provision of lugs as applicable and testing complete all as specified and as directed. Note: Cable shall be measured and paid separately under relevant item of this schedule.
Supply and fixed loop in- loop out fuse junction box of internal dimension 250 x 200 x 100mm made of FRP sheet with weather proof canopy and locking screw fitted with and including 50 Amp rated 4 way connectors for 3 phase and neutral incoming/outgoing, mounted in the box, fixing on street pole/rail poles including necessary aluminium clamps, suitable glands, lugs and GI nut and bolt including taking down old unserviceable junction box complete all as specified and as directed. Note : Contractor shall provide cable lugs and PVC gland of suitable size if required on site for connecting cable in junction box.
Supply and fixed in repair single run 3 core, 2.50 sqmm nominal cross sectional area multistranded copper conductor cable, over all PVC sheathed, 1100 Volts grade confirming to IS-694-2010 (FRLS) heavy duty cable PVC insulated and PVC sheathed from pole junction box to light fitting complete all as specified and as directed.
Supply and fixed in repairs single run 2 core, 1.50 sqmm nominal cross sectional area multistranded copper conductor cable, over all PVC sheathed, 1100 Volts grade confirming to IS-694-2010 (FRLS) heavy duty cable PVC insulated and PVC sheathed from pole junction box to light fitting complete all as specified and as directed.
Supply and fixed in repairs 20 mm nominal bore dia, UPVC pipes of pressure rating 10 kg/cm2 fixed to pole, any type including provision MS clamp of size 20mm x 3mm flat at interval of 1.5 m length complete all as specified and as directed
Supply and fixed in repair power contractor 40 amps 3 pole ( 1NO + 1 NC) , 415 Volts AC 50Hz,including connecting with existing system complete all as specified and as directed.
Supply and fixed in repairs of Digital Time switch (5-40) Amps , 240 Volts , AC , Single phase complete all as specified and as directed.
Material and labour for disconnection of all electric connection and taking down of street light fittings of any type , size , capacity and model removing of unserviceable spares or accessories for repair/ replacement of the same including reconnecting and refixing of street light to its existing position viz pole / high mast and testing complete all as specified and as directed. Note : The unit rate quoted shall be deemed inclusive for the following nature of work. A BOO shall be assembled for deciding the spares to be changed and paid against supply only items:- (a) Contractor shall be provided one Skilled Electrician and 2(Two) Helper alongwith T&P and wooden ladder. (b) Spares Parts required for repair will be measured and paid separately as supply only under relevant items of this schedule.
Supply only Electronic driver suitable for 45 Watts LED Street light fittings of approved make / brand complete all as specified and as directed.
Supply only Electronic driver suitable for 60 Watts LED Street light fittings of approved make/brand complete all as specified and as directed.
Supply and fixed in repairs MCB TPN 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessary connection complete all as specified and as directed. Note : Proper and suitable size of cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating.
Supply installation, testing and commissioning of outdoor street light panels (time line distribution board), degree of protection IP 54, three phase, maximum load 12 kW, prewired with Digital timer switch, contactor TP rating 65 Amp and MCB Triple pole & neutral rating 63 Amp complete all as specified and as directed.
Material and labour for steel tubular poles complete with cast iron base palate, final taper plug bolts, nuts & screws as specified type 410 SP-31, 9.0 meter long including painting all external exposed steel surfaces with two coats of aluminum paints over a coat of red oxide zinc chrome primer and all internal surfaces and external surfaces in contact with concrete with two coats of black bituminous paint complete all as specified and as directed including taking down old existing concrete poles / struts any size after demolition of foundation and depositing / stacking at a place where directed within 5KM distance from the work site complete all as specified and as directed.
M&L for cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate for foundation of stay assembly/struts/pole etc. (around the poles in pit) complete all as specified and as directed.
M&L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate for coping / pedestal of poles including necessary form work, fair finishing to exposed surfaces by using extra cement complete all as specified and as directed.
M & L for painting of steel pole (swan neck type or straight type) up to 12 mtr height with cross arms, clamp of any length and shape for LT overhead line/ for street light with two coat of aluminium paint after scratching out old paint, cleaning and exiting surface rust free, preparation of the existing surface, including marking pole numbers in a 15 cm dia yellow circle with number writing with black synethic paint/ Sticker, including painting strips in alternate from bottom to top with three strips of black synthetic paint & two strips of Yellow/ Red paint (as per existing pattern through out the circumference of pole, including removing extra wall papdi (dampness), peel off wall papdi by sand paper and making good with putty as per existing thickness and applying one coat of white washing on PCC copping of pole and re-numbering of pole with approved size of letter ( Example - CZ- 001) with synthetic enamel paint of white colour background and black colour lettering complete all as specified and as directed.
M&L for repairing of mechanism of lowering down and hoisting of flood light cage (mobile Head frame) of High mast assy of 16 mtr height, repairing, servicing of hoisting motor assy, repairing of chain, greasing of moving parts and replacement of steel rope, pulley, repairing of elevator wrench system etc, relaying of rope from top to bottom and making the mechanism functional complete all as specified and as directed.
M&L for winding of induction motor of single phase, 1 HP, 240 V, 50 Hz of High mast of hoisting and lowering mechanism of flood light cage with super enameled winding wire of existing gauge, replacement of bearing as per existing etc to make the motor functional complete all as specified and as directed.
M&L for repairing of Control Panel of High mast assy, repair / replacement of unserviceable parts like MCB, Contractor, auto manual switch, NO + NC switch, starter motor, replacement of u/s indicators, start stop switch , repairing and complete wiring of panel with min 1.5 Sqmm wire complete all as specified and as directed. Note : Cost of spares replaced will paid under relevant items of this schedule as supply only.
Supply only 4 Pole Power contractor Type MCX, AC 1 rating 40Amp, 415 V, 50 Hz, Make L&T Cat No. CS97012 or equivalent in Havells/C&S Electric/Hager/Indoasian as approved by the GE complete all as specified and as directed.
Material and labour for removing old painted surface and apply two coats of exterior acrylic emulsion paint abrasion resistance, corrosion resistance, excellent adhesion with superior finish over a coat of exterior grade white primer to PCC pole 9.00/9.50 mtr long including cross arms/street light bracket after preparation of existing painted surface including marking the strips of one feet each on pole with red and white exterior acrylic emulsion paint two coat upto 6 feet from the bottom of pole (Total 6 Nos strip of one feet each) and re-numbering of pole with approved size of letter (Example : CZ- 001) with synthetic enamel paint on black colour background and white colour lettering complete all as specified and as directed.
Material and labour for LED flood light epoxy powder coated pressure die-cast aluminium housing with weatherproof gasket for LEDs with lens and control gear compartments, pressure die-cast aluminium frame with heat resistant toughened clear glass fixed with SS screws, input voltage 140-270 Volts, delivering lumen equal to/greater than 3000 lumen, system wattage 30 Watt, Ingress protection IP-66 with all accessories including taking down unserviceable light fitting and removing from site complete all as specified and as directed.
M&L for LED garden light 09 watt made up of high grade unbreakable polycarbonate material, IP-65 protection, cone series innovative design with uniformly lit diffuser at the upper portion inlc taking out old unsv garden light fittings complete all as specified and as directed.
Supply and fixed of multifunction digital timer astronomical switch (5-40) Amps , 240 Volts , AC , Single phase complete all as specified and as directed.
samrat saw mill and joinery workshop
BBKundu
R K AGARWAL
BINOD TRADING CO.
SINGH & CO
M/S East India Traders
M/s Om Prakash Agarwala
M/S MOHAN KUMAR BANSAL
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .