Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 LAccepted-AOC | ₹1.7 L | L1 | Accepted-AOC L1 |
| 2 | L2₹1.7 L+₹4,466.81 (2.64%)Rejected-Finance | ₹1.7 L+₹4,466.81 (2.64%) | L2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | ABOOBACKER KP L1 | Mohammed Saleem L2 |
|---|---|---|---|---|---|
| 1.00Anganwadi Renovation | |||||
| 1.00 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 2.04 | cum | 7,286.51 ₹14,893.63 Lowest | 7,400 ₹15,125.6 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1.42 | cum | 8,483.41 ₹12,020.99 Lowest | 8,600 ₹12,186.2 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 245.43 | kg | 171.81 ₹42,166.64 Lowest | 180 ₹44,176.68 |
| 1.00 | OD493587/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during transportation and
should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet
shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal,
complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting tosize and shape wherever required. | 41.4 | sqm | 572.91 ₹23,718.47 Lowest | 580 ₹24,012 |
| 1.00 | 50.6.7.1:Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc. | 4.72 | cum | 7,489.25 ₹35,349.26 Lowest | 7,600 ₹35,872 |
| 1.01 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 131.25 | kg | 163.89 ₹21,510.56 Lowest | 170 ₹22,312.5 |
| 1.01 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 0.72 | sqm | 354.69 ₹255.38 Lowest | 360 ₹259.2 |
| 1.01 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 40.8 | sqm | 339.63 ₹13,856.9 Lowest | 340 ₹13,872 |
| 1.01 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | 73.6 | sqm | 74.26 ₹5,465.54 Lowest | 80 ₹5,888 |
Tender Value
Refer Docs
EMD Value
₹4,240
Closing Date
9 Mar 2026, 10:00 amClosed
Assistant Engineer
Assistant Engineer Municipal Office Perinthalmanna
Annual Plan-Project no 645/25-26- Ponniyakurissi anganwadi (71 ) in ward 6 of Perinthalmanna Municipality-General Civil Work
2026_LSGD_842809_10
15/ME/LIDandEW/PMNA/ET/2025-26
Open Tender
Civil Works - Roads
Item Rate
Perinthalmanna
Please refer Tender documents.
10 documents required · 10 mandatory
₹555
Yes
₹4,240
Yes
6 Jul 2026
3 Mar 2026
10 Mar 2026
3 Mar 2026
9 Mar 2026
3 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Anganwadi Renovation | |||||
| 1.001 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.002 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.003 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 0.4 | kg | - | - |
| 1.004 | OD493587/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns. Sheet should have
protective guard film of 25 microns minimum to avoid scratches during transportation and
should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet
shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal,
complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins,
rafters and trusses and including cutting tosize and shape wherever required. | 1 | sqm | - | - |
| 1.005 | 50.6.7.1:Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc. | 1 | cum | - | - |
| 1.006 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | - | kg | - | - |
| 1.007 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | - | sqm | - | - |
| 1.008 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 1 | sqm | - | - |
| 1.009 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | 1 | sqm | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.34 MB
BOQ_1422213.xls
BOQ • 0.30 MB
645.rar
Tender Documents • 1.72 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .