Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.7 LAccepted-AOC 13 THAKKAR PLOT DEEPAK KUNJ PORBANDAR 360575 | PORBANDAR | GUJARAT | 360575 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹16.0 L+₹37,490 (2.40%)Rejected-AOC 0 BADRI ELECTRICALS NEAR SHRIGOR FALI NEAR ANADABAWA CHAKLO JAMNAGAR GUJARAT 361001 UDYAM GJ 10 0001822 | JAMNAGAR | GUJARAT | 361001 | L2 | Rejected-AOC Being not L1 | |
| 3 | L3₹16.3 L+₹61,600 (3.94%)Rejected-AOC SHAMAL BECHAR S CHAWL SIDHANATH ROAD B H KHANDERAO MARKET VADODARA 390 001 GUJARAT | VADODARA | VADODARA | GUJARAT | 390001 | L3 | Rejected-AOC Being not L1 |
Tender Value
Refer Docs
EMD Value
₹36,000
Closing Date
8 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sachin Singhal EE GE Army Baroda
Opp Akashwani, Makarpura road PO-ONGC Baroda-390009
As per BOQ
2024_MES_659116_1
8801
Open Tender
Civil Works
Item Rate
330 days
GE ARMY BARODA
As per tender documents
5 documents required · 5 mandatory
₹500
Yes
GE ARMY BARODA
₹36,000
Yes
31 Aug 2024
11 Jun 2024
12 Jul 2024
11 Jun 2024
8 Jul 2024
25 Jun 2024
11 Jun 2024 - 24 Jun 2024
Amount
Petty repairs to joinery works such as easing of doors, windows, kitchen cabinets in position or by taking down if required refixing existing builder hardware etc (removed for repair work of joinery) including providing glue, nails and screws etc required to make the joinery functional and refixing to position and rectifying other misc minor carpentry works assigned all as directed by Engineer in Charge. Note (i) :- Items replaced shall be paid seprately at S&F rates and attending for the same shall not be counted and paid under this item. (ii):- The complaints are to be attended at atmost priority and delay will be penalised as mentioned in Particular specification.
Petty repairs to plumbing/internal water supply works such as repair to leaking bib taps, pillar taps, mixers, stop cocks etc by tightening and providing washer, repair to float valves, low level cistern by mixture adjustments, leaking water supply lines by tightening the GI fitting or refixing W/S or sanitary fixtures using thread/teflon tapes and including small GI fittings such as GI elbow, socket, union etc as required at site all as directed by Engineer in Charge. Note : (i) :- Items replaced shall be paid seprately at S&F rates and attending for the same shall not be counted and paid under this item. (ii):- The complaints are to be attended at atmost priority and delay will be penalised as mentioned in Particular specification.
S&F in repair 150 mm aluminium anodised barrel tower bolts, of extruded section all as specified and directed
S&F in repair 300mm aluminum anodised sliding door bolts, with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast alluminium alloy complete all as specified and directed.
S&F in repair 300mm mild steel sliding door bolt stove enamelled black with bright bolt not less than 12mm dia with and incl a min of six bolts and nuts four on bolt plate and two on staple plate complete all as specified and directed.
S&F in repair mild steel butt hinges of 75 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed
S&F in repair mild steel butt hinges of 100 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed
S&F in repair 150 mm extruded aluminum alloy handles, fabricated type anodized complete all as specified and directed
S&F in repairs 125 mm long safety type aluminium anodised hasp and staple with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F in repair 20 mm dia D type CP towel rail 600 mm long between flanges complete all as specified and directed.
S & F in repairs 25 mm dia stainless steel Curtain Rod fancy type with a pair of fancy type sockets (design of socket shall be approved by GE/AGE at the time of execution) as directed
S&F in repair floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140 mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed.
S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised staples or wooden beading complete all as specified and directed.
Hacking out old broken glass (any thickness, quality or description) from wooden frame/metal frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
S&F sheet glass 3.0 mm thick ordinary quality and glazing with oil putty in squares not exc. 0.50sqm in each pane complete all as specified and directed.
S&F 3 mm thick figured glass pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement morter bedding/backing , removing serviceable tiles to store and rubbish off the premises.
M & L for joint free non skid ceramic coloured tiles 7 to 8mm thick, area of each tiles exceeding 0.11sqm and n. exc 0.18 sqm in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15mm thick in cement mortor (1:6) complete.
M & L for glazed ceramic coloured wall tiles in vertical surface 350x250x 7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick rending in CM : 1:4 complete all as specified and directed.
Taking up or down GI tubing 15 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed.
Taking up or down GI tubing 20 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed.
S&F GI pipe medium grade 15mm bore fixed to wall wall and ceiling or laying in floors, with all new fittings as required at site complete
Refixing old serviceable steel tubing 15 mm bore and connections in new or old position (walls, ceiling, floor etc) complete all as specified and directed. (Note: Serviceable tubing obtained from item No. 20 here in before shall be reused )
S&F 20 mm bore galvanised iron tubing medium grade including all fittings in walls/ceilings or laid in floors including cutting complete all as specified and directed.
Refixing old serviceable steel tubing 20 mm bore and connections in new or old position (walls, ceiling, floor etc) complete all as specified and directed. (Note: Serviceable tubing obtained from item No. 21 here in before shall be reused )
Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity exc 250 ltr but n exc 500 ltr complete all as specified and directed.
Disconnecting existing tanks, setting aside for lowering if required, carrying out petty repairs, cleaning etc hoisting and refixing in position of capacity exc 250 ltr but n exc 500 ltr complete all as specified and directed.
Supply hoisting and fix 500 ltrs rotational moulded polythene water storage water tanks twin layered construction ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I duly ISI Marked, 20mm GI light grade over flow pipe approx length 1.5m long, 20mm GI medium grade pipe for wash out approx length 2.00 m duly plugged at one end shall be provided including dismantling the existing tank complete all as specified.
Disconnecting existing tanks, setting aside for lowering if required carrying out petty repairs,cleaning etc hoisting and refixing in position of capacity exc 500 ltr but n exc 1000 ltr complete all as specified and directed.
Supply hoisting and fix 1000 ltrs rotational moulded polythene water storage water tanks twin layered construction ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I duly ISI Marked, 20mm GI light grade over flow pipe approx length 1.5m long, 20mm GI medium grade pipe for wash out approx length 2.00 m duly plugged at one end shall be provided including dismantling the existing tank complete all as specified.
S&F in repair Chromium plated long body fancy type bib taps with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and directed.
S&F in repair 15mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair stop valves/angle cocks, cast copper alloy with round operating knob chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule.
S&F in repair 15mm bore PTMT Bib taps standard any colour fancy type screwed down for iron pipe and fixed minimum weight 105 gm complete all as specified and directed.
S&F in repair 20 mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed.
All as per item No 35 here-in-before but 15 mm dia complete all as specified and directed.
S&F in repair PTMT waste coupling of 32 mm dia (half or full thread) including taking down old coupling of any description complete all as specified and directed.
All as per item No 37 here-in-before but 40 mm dia complete all as specified and directed.
S&F in repair CP Grating of size 150x150 mm complete all as specified and directed.
S&F in repair 15 mm dia 450 mm long PVC connection pipe with two PTMT nuts at each ends with rubber washer complete all as specified and directed.
S&F in repair PVC connection pipe 15mm dia and 600 mm long with two PTMT nuts at each ends with rubber washer
S&F in repair EWC anti microbial seat cover hygenic type for padestral pattern complete all as specified and directed.
S&F in repair CP soap dish fixed to wall with brass chromium plated screws complete all as specified and directed.
S&F in repairs chromium plated toilet paper holder.
S&F in repair 125 mm dia, chromium plated swivel type shower rose with 195 mm long chromium plated shower arm and wall flange suitable for fixing 15mm bore iron pipe all as specified and directed.
S&F in repairs of CP Jet Spray Hygenic spray set with 15mm dia tube acrylic type all as specified and directed
S&F in repairs 10 Litres, PVC valveless syphonic action type, flushing Cistern, low level, white inlet, ball valve, float, and brackets inclluding 32mm PVC flush pipe suitable for flushing cistern complete.
S&F in repair round moulded PVC water tank lid for 500 Ltrs, 1000 Ltrs capacity PVC tank complete all as specified and directed.
S&F in repair steel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate complete all as specified and directed.
S&F in repair internal brass fitting (phase) for 15 mm bore CP concealed stop cock of any make complete all as specified and directed.
Supply only 8mm thick plain edge moulded corner glass shelf of size 300 X 300 mm fix with cp double protection rail all as specified and directed by Engr in charge
S&F in repair aluminium( Extruded section) body door closer hydraulically regulated , designation No. 3 universal type , suitable for door shutterof 851 to 1000mm in width and of weight between 61 to 80kg complete all as specified and directed.
S&F in repairs 32 mm dia flexible waste pipe 800mm long for wash basin and kitchen sink complete all as specified and directed.
S&F in repairs aluminium door seal complete all as specified and directed.
S&F in repair vitreous china squatting pan “Orissa pattern of size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) but including lime concrete bedding complete all as specified and directed.
S&F in repairs Vitreous China Europion water closet (pedestal pattern), white, excluding flushing cistern and flush pipe and trap but including fixing bolts, WC seat cover fixed with aluminium or MS chromium plated hinging device.
Dismantling PVC (SWR) pipe of any description complete all as directed
S&F 110mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed
S&F 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete all as specified and directed
S&F 110 mm dia PVC (SWR) bends of any radius with access door complete all as specified and directed
S&F 75 mm dia PVC (SWR) bends of any radius with duck foot or heel rest fitted with oval access door complete all as specified and directed.
S&F stainless steel kitchen rack made of 0.63 mm thick stainless steel sheet of size 750 mm x 750 mm x 250 mm fixed to wall with stainless screws complete all as specified and directed.
S&F in repair of CP Health faucet complete all as specified and as directed.
S&F in repair CP centre hole wash basin mixer with fitttings complete all as specified and as directed
S&F in repair CP wall mixer with all fittings complete all as specified and as directed.
Taking down cement plaster on any description including scrubbing down with water and prepare to receive new plastering in internal walls complete all as specified and directed.
M&L rendering 15mm thick on other than fair faces of brick work or concrete surfaces with CM 1:6 finished even and smooth withot using extra cement.
M&L for Preparing new plaster surface apply two coat of distemper oil emulsion over a coat of 2 mm average thick wall putty and priming coat, on internal walls complete all as specified.
M&L for Vitreous china half stall type urinal, bowl complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugss with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing flushing cistern with brackets, flush pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed.
S&F in repair vitreous china Wash hand basin, white , flat back size 550x400 mm except taps but incl brackets and 32 mm dia CP waste coupling all as specified.
S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen of laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting unoin overall size 915 x mm x 330mm x 460mm with bowl size 410mm x 330mm x160mm complete all as specified and directed.
Badri Electricals
M/s. RAMESH NARHARI VALEKAR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .