Construction of Community Sanitary Complexes (3 Units) near SW Girls Hostel in Ravikamatam Mandal of Anakapalli District Estimate cost of Rs.9.00 Lakhs

Earth work excavation and depositing the soil on banks with an initial lead of 10m and initial lift of 2m in loamy and clay soils like BC soils, red earth and ordinary gravel SS 20B including shoring, strutting, sheeting ,planking and dewatering cost of hire charges of T&P labour charges etc. complete for fineshed iem of work for foundation of building.

Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including Cost and conveyance of water to site and all operational, incidental, labour charges, Seigoirage charges, sales and other taxes etc., hire charges of T & P etc., complete for finished item of work.

Vibrated Cement Concrete (1:4:8) M 7.5 Grade using 40mm HBG Metal (SS5) metal from approved quarry including Cost and Conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental and labour charges such as mixing, laying, curing concrete for 21 days etc., complete for finished item of work.

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Footings

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Plinth beams

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Columns

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm& 12mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Lintels

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Roof beams

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Roof slab 115mm thick

Providing high yield strength deformed (HYSD) steel TMT bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including Cost and Conveyance of bars from approved sources to site of work with all taxes including Cost and Conveyance of binding wire, cover blocks chains, overlaps, spacess, dowels, wastage etc, and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and other taxes,on cost of all materials complete for finished item of work in all floors

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Cover slab

Brick Masonary in Basement and Super Structure with CM (1:6) prop: using 2nd class traditional Bricks of size 23x11x7 cms having minimum crushing strength of 50 kg/cm2 including Cost and Conveyance of all materials, scaffolding charges, etc complete for finished item of work. For Basement alround

Brick Masonary in Basement and Super Structure with CM (1:6) prop: using 2nd class traditional Bricks of size 23x11x7 cms having minimum crushing strength of 50 kg/cm2 including Cost and Conveyance of all materials, scaffolding charges, etc complete for finished item of work. For Super structure

Plastering with CM (1:3) 12mm thick including cost and conveyance of all material, labour charges etc., complete including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, finishing, curing, etc., complete for finished item of work for ceiling

Providing Acco proof Plastering with CM (1:3) 12mm thick over RCC roof slab (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including Cost and Conveyance of all materials like cement, sand, water proofing compound, water etc., to site, on all materials, all operational, incidental and labour charges such as mixing mortar, laying, rounding off at junctions of wall and slab, rendering smooth with thread lining, curing, lift charges, etc., complete for finished item of work.

Plastering with CM (1:5) 12mm thick including cost and conveyance of all material, labour charges etc., complete including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, finishing, curing, etc., complete for finished item of work.

Acco proof Plastering with CM (1:3) 12mm thick including cost and conveyance of all material, labour charges etc., complete for Septic tank.

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles and all labour charges etc., complete, including seigniorage charges, etc., complete for finished item of work.

Providing Dadooing to toilet walls with coloured glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:3), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand , water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work.

Providing and fixing 30mm thick BRAND FACTORY MADE SOLID SINGLE SIDE PRELAM PANEL PVC DOOR SHUTTER consisting of frame made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles, and 15mmX15mm for top and bottom rails. The MS. Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mm thick heat moulded single side Prelam Pac ‘C’ channel of size 30mmX50mm to form stiles.5mm thick& 75mm wide single side prelim Pac sheets shall be for the top, bottom and lock rails. Panelling of 5mm thick one side Pac sheet to be fitted in the MS. Frame and sealed to the front (prelam side) stiles and rails (which should have a 5mm 45 bent portion as beading) and attached to the back(white/ivory) stiles and rails which should have a 10mm 900 bent portion as beading ) using 2nos. 15mm wide X 5mm thick Pac sheet beading inside the 90 bent beading. All stiles, rails and beadings are to be joined to the panel using solvent cement etc. an additional 5mm thick Pac strip of 20mm width to be stuck on the interior side of the ‘C” channel using Pac solvent cement adhesive and 10mm(5mmX2) thick, 20mm wide cross Pac sheet to be fitted as gap insert for top and bottom rail etc. complete as per direction of Engineer –in-Charge, manufacture specification and drawing.

Cost supply and fixing of cement Jali of size of 40 mm thick including cost and conveyance chages etc. complete.

Painting to new walls with 2 coats of white cement paint over prime coat of approved brand and shade after thoroughly brushing the surgace to remove all dirt and remains of loose powdered materials, incluldling cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work for internal walls

Supplying & Delivery of Indian pattern white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 580 mm Long BMW-D.01 including cost and conveyance of all materials and all labour charges but excluding taxes etc., complete.

Supplying & Delivery of Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Single C.P. Pillar cock BMW-D.26 including cost and conveyance of all materials and all labour charges but excluding taxes etc., complete.

Cost, supply and fixing of 110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm BMW-G.13

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) - SDR 13.5 BMW-I.221 & BMW-I.222 - 28.60mm OD Pipe

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) - SDR 13.5 BMW-I.221 & BMW-I.222 - 22.20mm OD Pipe

Provision for taps S&F 12.7mm N.P bib tap Indian make 3heavy duty Each 223 183 BMW-E.10 b) list of approved Brands/ Manufacturers/ Suppliers) including labour charges as per SSR BMW-E.09

Supplying and Fixing of 25mm dia 2.0 mm thick PVC Conduit pipe concealed in wall with all required accessories including chiselling the wall whereever necessaty including masonary work for Light,fan and separate plug point with T.W.Deep box including all labour charges etc. Ele-1.2.1 (B)

Wiring with 2 of 14/0.3mm (1.0 Sq.mm) Finolex P.V.C. insulated F.R. flexible copper cable (ISI MARK) in existing pipe with 6A switch control and 3/2 pin sockets fixing on separate board including all labour charges etc., complete.

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Supply of 9W Pin type CFL Lamp.Makes: Wipro / G.E. / Phillips / Crompton / Bajaj / Havells / Surya / HPL / Halonix. ELEC-3.7.4

Supply, Transportation and fixing of 1x40W patty type tube light luminaire with copper chock, starter etc., including 1No 40W tube etc., complete

Earth work excavation and depositing the soil on banks with an initial lead of 10m and initial lift of 2m in loamy and clay soils like BC soils, red earth and ordinary gravel SS 20B including shoring, strutting, sheeting ,planking and dewatering cost of hire charges of T&P labour charges etc. complete for fineshed iem of work for foundation of building.

Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including Cost and conveyance of water to site and all operational, incidental, labour charges, Seigoirage charges, sales and other taxes etc., hire charges of T & P etc., complete for finished item of work.

Vibrated Cement Concrete (1:4:8) M 7.5 Grade using 40mm HBG Metal (SS5) metal from approved quarry including Cost and Conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including all operational, incidental and labour charges such as mixing, laying, curing concrete for 21 days etc., complete for finished item of work.

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Footings

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Plinth beams

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Columns

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm& 12mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Lintels

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Roof beams

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Roof slab 115mm thick

Providing high yield strength deformed (HYSD) steel TMT bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including Cost and Conveyance of bars from approved sources to site of work with all taxes including Cost and Conveyance of binding wire, cover blocks chains, overlaps, spacess, dowels, wastage etc, and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and other taxes,on cost of all materials complete for finished item of work in all floors

Reinforced Cement Concrete corresponding to M15 grade as per IS 456 equivalent to (1:2:4:) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using 20mm size HBG (SS5) metal from approved quarry with concrete mixture including cost and conveyance of all materials like cement, sand(unscreened), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work - For Cover slab

Brick Masonary in Basement and Super Structure with CM (1:6) prop: using 2nd class traditional Bricks of size 23x11x7 cms having minimum crushing strength of 50 kg/cm2 including Cost and Conveyance of all materials, scaffolding charges, etc complete for finished item of work. For Basement alround

Brick Masonary in Basement and Super Structure with CM (1:6) prop: using 2nd class traditional Bricks of size 23x11x7 cms having minimum crushing strength of 50 kg/cm2 including Cost and Conveyance of all materials, scaffolding charges, etc complete for finished item of work. For Super structure

Plastering with CM (1:3) 12mm thick including cost and conveyance of all material, labour charges etc., complete including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, finishing, curing, etc., complete for finished item of work for ceiling

Providing Acco proof Plastering with CM (1:3) 12mm thick over RCC roof slab (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1Kg/bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including Cost and Conveyance of all materials like cement, sand, water proofing compound, water etc., to site, on all materials, all operational, incidental and labour charges such as mixing mortar, laying, rounding off at junctions of wall and slab, rendering smooth with thread lining, curing, lift charges, etc., complete for finished item of work.

Plastering with CM (1:5) 12mm thick including cost and conveyance of all material, labour charges etc., complete including c/c of all materials like cement, sand,water etc., to site, other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer-in-charge, finishing, curing, etc., complete for finished item of work.

Acco proof Plastering with CM (1:3) 12mm thick including cost and conveyance of all material, labour charges etc., complete for Septic tank.

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles and all labour charges etc., complete, including seigniorage charges, etc., complete for finished item of work.

Providing Dadooing to toilet walls with coloured glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:3), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand , water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work.

Providing and fixing 30mm thick BRAND FACTORY MADE SOLID SINGLE SIDE PRELAM PANEL PVC DOOR SHUTTER consisting of frame made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles, and 15mmX15mm for top and bottom rails. The MS. Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mm thick heat moulded single side Prelam Pac ‘C’ channel of size 30mmX50mm to form stiles.5mm thick& 75mm wide single side prelim Pac sheets shall be for the top, bottom and lock rails. Panelling of 5mm thick one side Pac sheet to be fitted in the MS. Frame and sealed to the front (prelam side) stiles and rails (which should have a 5mm 45 bent portion as beading) and attached to the back(white/ivory) stiles and rails which should have a 10mm 900 bent portion as beading ) using 2nos. 15mm wide X 5mm thick Pac sheet beading inside the 90 bent beading. All stiles, rails and beadings are to be joined to the panel using solvent cement etc. an additional 5mm thick Pac strip of 20mm width to be stuck on the interior side of the ‘C” channel using Pac solvent cement adhesive and 10mm(5mmX2) thick, 20mm wide cross Pac sheet to be fitted as gap insert for top and bottom rail etc. complete as per direction of Engineer –in-Charge, manufacture specification and drawing.

Cost supply and fixing of cement Jali of size of 40 mm thick including cost and conveyance chages etc. complete.

Painting to new walls with 2 coats of white cement paint over prime coat of approved brand and shade after thoroughly brushing the surgace to remove all dirt and remains of loose powdered materials, incluldling cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work for internal walls

Supplying & Delivery of Indian pattern white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 580 mm Long BMW-D.01 including cost and conveyance of all materials and all labour charges but excluding taxes etc., complete.

Supplying & Delivery of Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain,32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963- 1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm - Single C.P. Pillar cock BMW-D.26 including cost and conveyance of all materials and all labour charges but excluding taxes etc., complete.

Cost, supply and fixing of 110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm BMW-G.13

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) - SDR 13.5 BMW-I.221 & BMW-I.222 - 28.60mm OD Pipe

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007) - SDR 13.5 BMW-I.221 & BMW-I.222 - 22.20mm OD Pipe

Provision for taps S&F 12.7mm N.P bib tap Indian make 3heavy duty Each 223 183 BMW-E.10 b) list of approved Brands/ Manufacturers/ Suppliers) including labour charges as per SSR BMW-E.09

Supplying and Fixing of 25mm dia 2.0 mm thick PVC Conduit pipe concealed in wall with all required accessories including chiselling the wall whereever necessaty including masonary work for Light,fan and separate plug point with T.W.Deep box including all labour charges etc. Ele-1.2.1 (B)

Wiring with 2 of 14/0.3mm (1.0 Sq.mm) Finolex P.V.C. insulated F.R. flexible copper cable (ISI MARK) in existing pipe with 6A switch control and 3/2 pin sockets fixing on separate board including all labour charges etc., complete.

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Supply of 9W Pin type CFL Lamp.Makes: Wipro / G.E. / Phillips / Crompton / Bajaj / Havells / Surya / HPL / Halonix. ELEC-3.7.4

Supply, Transportation and fixing of 1x40W patty type tube light luminaire with copper chock, starter etc., including 1No 40W tube etc., complete