SPECIAL REPAIR/REPLACEMENT OF EARTHING/ISOLATORS, LIGHTENING ARRESTERS AND PROVN OF GUARD ROOM UNDER GE MISAMARI

Amount

S&F Lightening Arrester Expulsion type complete with all Fittings Transmission Class discharge capacity 65 KA suitable,for working pressure 11000 Volts including dismantling of old unserviceable and connection to earthing , complete all as specified and directed. Make :- Jaipuriya Brothers or equivalent make of Pactil/Rashtia.

S&F Switch Air Break Gang Operated for 11 KV grade, Triple Pole vertically mounted on insulator and fitted on steel frame , current rating 200 Amps, mechanically operated mechanism from Ground Level consisting of Operating Rod of GI Pipe 25mm bore (dia) ‘light grade’ of suitable Length worked From Ground Level and with Locking Arrangement Mild Steel Flat Iron Clamp 50x6mm , complete all as specified and as directed.Make :- Jaipuriya Brothers or equivalent make of Pactil/Rashtia.

S&F Switch Air Break Gang Operated for 33 KV grade, Triple Pole horizontal mounted on insulator and fitted on steel frame , current rating 400 Amps, mechanically operated mechanism from Ground Level consisting of Operating Rod of GI Pipe 40 mm bore (dia) ‘Medium grade’ of suitable Length worked From Ground Level and with Locking Arrangement Mild Steel Flat Iron Clamp 50x6mm , complete all as specified and as directed.Make :- Jaipuriya Brothers or equivalent make of Pactil/Rashtia.

Dismantling Air Break Gang Operated Switches HT 11 KV/33 KV, 3 Phase, any capacity ( 200/400 ) Amps vertical / horizontal mounted including Insulators and Operating Mechanism for repair/replacement of broken / worn out components and insulators etc. Make :- Jaipuriya Brothers or equivalent make of Pactil/Rashtia.

M & L for earthing complete with GI Earth Plate Electrode 600mm x 600mm x6mm, thick buried directly in ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below Normal Ground Level, connected to GI wire as earth lead 4 mm dia drawn through and including Galvanised Iron protection Pipe 15 mm bore (dia) Light grade upto 1.0 Metre above the ground level of the HT pole foundation where PCC pole is situated by means of Bolts, Nuts, Check Nuts and Washers etc Earth plate surrounded by a packed thickness of charcoal or coke dust mixed with common salt in alternate layers of not exc 150mm thick PCC Pit in cement concrete 1:3:6 (20 mm graded aggregrate ), Precast RCC 1:2:4 (20mm graded aggregrate ) cover slab 350 x350 x 50mm thick reinforced with and including 8mm dia TMT Bars @ 10 cm Centre to Centre both ways GI Wire Mesh , Funnel, with GI Watering Pipe 20mm bore dia Medium grade necessary excavation in soft loose soil returning filling in and removal of surplus soil upto a distance of 50 METRE and all as shown in Electrical Plate No. 3 of MES schedule Part- I and testing on completion including taking down unserviceable earting and connected Items, complete all as specified and as directed.

M & L for earthing complete with GI Earth Plate Electrode 600mm x 600mm x6mm, thick buried directly in ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below Normal Ground Level, connected to Galvanised iron earth strip 32X6 mm drawn through and including Galvanised Iron protection Pipe 40 mm bore (dia) Light grade upto heightl of the transformer foundation where foundation situated by means of Bolts, Nuts, Check Nuts and Washers etc Earth plate surrounded by a packed thickness of charcoal or coke dust mixed with common salt in alternate layers of not exc 150mm thick PCC Pit in cement concrete 1:3:6 (20 mm graded aggregrate ), Precast RCC 1:2:4 (20mm graded aggregrate ) cover slab 350 x350 x 50mm thick reinforced with and including 8mm dia TMT Bars @ 10 cm Centre to Centre both ways GI Wire Mesh , Funnel, with GI Watering Pipe 20mm bore dia Medium grade necessary excavation in soft loose soil returning filling in and removal of surplus soil upto a distance of 50 METRE and all as shown in Electrical Plate No. 3 of MES schedule Part- I and testing on completion including taking down unserviceable earting and connected Items, complete all as specified and as directed.

M & L for earthing complete with copper Earth Plate Electrode 600mm x 600mm x3.15mm, thick buried directly in ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below Normal Ground Level, connected to Copper earth strip 20x3 mm drawn through and including Galvanised Iron protection Pipe 40 mm bore (dia) Light grade up to height of the transformer foundation where transformer is situated by means of Bolts, Nuts, Check Nuts and Washers etc Earth plate surrounded by a packed thickness of charcoal or coke dust mixed with common salt in alternate layers of not exc 150mm thick PCC Pit in cement concrete 1:3:6 (20 mm graded aggregrate ), Precast RCC 1:2:4 (20mm graded aggregrate ) cover slab 350 x350 x 50mm thick reinforced with and including 8mm dia TMT Bars @ 10 cm Centre to Centre both ways GI Wire Mesh , Funnel, with GI Watering Pipe 20mm bore dia Medium grade necessary excavation in soft loose soil returning filling in and removal of surplus soil upto a distance of 50 METRE and all as shown in Electrical Plate No. 3 of MES schedule Part- I and testing on completion including taking down unserviceable earting and connected Items, complete all as specified and as directed.

Supply and fix Earth continuity conductor or Main Earthing lead fixed to Transformer terminals or any other indicated situation for loop copper strip of size 20mmx3mm complete all as specified and as directed.

Supply and fix Earth continuity conductor or Main Earthing lead fixed to Transformer terminals or any other indicated situation for loop Galvanised iron strip of size 32mmx6mm complete all as specified and as directed.

Supply and fix Earth continuity conductor or Main Earthing lead fixed to Transformer terminals or any other indicated situation for loop Galvanised iron lead of size 4 mm dia complete all as specified and as directed.

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified

Spreading and levelling of earth in layers n.exc 25 cm thick and well ramming incl watering in soft/loose soil complete.

M & L for hardcore of broken stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified

M & L for removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

Surface excavation in soft/loose soil not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified

M & L for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M & L for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete.

-ditto- as per Item No. 18 but 6 to 8 mm dia bars.

-ditto- as per item 18 but 5 to 10 mm dia bars in stirrups, spacers and binders.

Supply only liquid water proofing compound.

M & L for RCC 1:2:4 (nominal mix) type B1 using 20mm graded aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. and mass concrete mixing with WPC @ 200 ml per bag of cement complete.

M & L for RCC 1:2:4 (nominal mix) type B1 using 20mm graded aggregates as in columns, pillars, posts etc mixing with WPC @ 200 ml per bag of cement complete.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams, surface is required to be fair finished complete .

M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions, rectangular or polygonal surfaces of concrete , surface is required to be fair finished. complete.

M & L for RCC 1:2:4 (nominal mix) type B1 using 20mm graded aggregates as in Roof beams, cantilevers, intels over 1.5m span mixing with WPC @ 200 ml per bag of cement complete.

M & L for RCC 1:2:4 (nominal mix) type B1 using 20mm graded aggregates as in slabs supported on walls, beams and columns and the like mixing with WPC @ 200 ml per bag of cement complete.

M & L for formwork to sides and soffits of floor or roof beams, beam, lintels, shelves etc., fair finished. complete

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick fair finished. complete

M & L for formwork to edges of concrete flats, treads, window cills, floor and roofs n exc 20 cm wide roughed finished surface complete

M & L for 75mm thick cement concrete type D-2 1:4:8 using 40mm graded aggregate , as in sub base. complete all as specified and as directed by the Engineer-in-Charge

M & L for brickwork with sub class “B” bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge

M & L for brickwork with sub class “B”, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge

M&L Water Proofing Treatment on existing cleaned RCC Roof with the following Specifications, complete all as specified and as directed (a). Priming surfaces and applying normal treatment (for moderate conditions), using glass fibre base bitumen felt grade 2 (except felt) (b). M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m over cleaned surface of any description. (c) S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified. (d) M&L Applying two coats of Aluminium Paint over APP based Polymeric Membrane.

M & L for Rendering 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces even & fair.

M & L for rendering 15 mm thick in cement mortar 1 : 6 on fair faces of brick work or concrete surfaces including finished even & fair surfaces without using extra cement.

M & L for rendering 10mm thick in cement plaster 1:3 on fair faces of brick work or concrete surfaces , in ceilings, finished even and smooth without using extra lime or cement, in ceilings complete all as specified and as directed by the Engineer-in-Charge

M & L for 75 mm thick cement concrete 1 : 3 : 6 type C-1, (using 20 mm graded stone aggregate) as in plinth protection.

M & L for preparation of new plastered or unplastered surface of walls and applying 3 coats of white wash as on walls.

M & L for preparation of new plastered or unplastered surfaces as in ceilings, applying 3 coats of white wash complete.

M & L for preparing new plastered surfaces of walls by applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) and as directed with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

M&L for prepration of new wall surfaces and applying two coat of oil bound distemper over 1mm thick wall putty white and making smooth finish all as specified.

M&L glazed ceramic colour tiles in vertical surface 300x600x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match fixed over and incl 10mm thick CM (1:4) as in backing coat complete

M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc, incl 15mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed.

M & L for joint free non-skid/matt finished ceramic colour tiles 600x600, 7 to 8mm thick in floors etc. set and jointed in neat cement slurry and pointed with white or coloured to match with tile laid over and including 15mm thick screed bed in CM (1:6) complete.

-ditto- all as per item No. 45 above but on skirting and dado etc. over and incl rendering 10mm thick in CM 1:4 finished rough to receive tiles complete.

M&L for 20-25 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms as reqd size and like pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl bull nosing of edge of slabs laid over 15mm thick screed bed in CM (1:6), complete all as specified and directed.

S&F Factory made solid panel PVC moulded door shutter 30mm thick (style) with wood free EPS consisting of frame made out of MS tubes for top & bottom rails, and all as per drawings of SSR Pt-II including taking down of existing unserviceable door and frames complete.

S&F Solid PVC Door Frame of size 100mm x 47mm made out of 5mm wood grain printed colour PVC sheet reinforced with M.S. Square tube complete

S & F IInd Class HW 30mm thick glazed and skeleton factory made shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) supplied and fitted to chowkats.

S & F 35mm thick, 2nd class HW, plain framed, panelled shutter factory made (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed by the Engineer-in-Charge

S&F steel window/ventilator of double shutter combination of glazed and mosquito proof shutter with & incl stainless steel wire mesh of 0.36mm dia and 1.40mm aprture with side/top hung shutter as reqd with projecting type hinges, steel handle steel peg stay with and including provn of guard bars of 12mm square bars complete.

S & F for 3.0mm thick plain glass/ pin head type and glazing with oil putty in squares n exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge

S & F 25mm dia,MS powder coated tubular curtain rail complete

S & F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge

S&F 100mm MS butt hinge med wt cold rolled complete.

M & L for rolled mild steel work as in door frame (Chowkhats) including provn of 10m dia deformed bar welded horizontally to bottom of frame conforming to Fe-290 ( Gde 165-E ) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand, complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surfaces of any description over 10 cm in width or grith, not otherwise described including preparation of surfaces.

M & L for two coats of synthetic enamel paint over coat of pink primer on newly wooden surfaces of any description not otherwise described over 10 Cm width or girth including preparation of surfaces complete.

S & F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing for ISI Marked 150mm long aluminium handle, cast type, anodized complete all as specified and as directed by the Engineer-in-Charge.

S & F 250mm long mild steel sliding door bolts, stove enamelled black, with bright bolt not less than 12mm dia complete.

M & L 15mm bore Tube medium grade galvanised with all fitting and fixed complete to walls and ceilling or laid in floors incl necessary cutting chasing into wall etc complete all as specified.

S&F GI water tubing of 20mm dia medium grade with all fittings and fixed complete to wall and ceilings or laid in floors complete all as specified and as directed by the Engineer-in-Charge.

M & L for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed

S & F 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge.

S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe fixed of 20mm bore.

S&F vitreous china wash hand basin, white/ Ivory colour, oval type of size 630 x 450 mm (excluding taps, waste, chain and plug and procelain stopper but including brackets, complete all as specified and directed.

S&F bib tap, fancy type chromium plated fixed for 15mm bore of pipe complete all as specified and directed.

S & F 15mm bore angle cock, chromium plated, screwed both ends for iron pipe complete.

S & F chromium plated swivel shower rose 125mm size complete.

S&F PVC connections 15mm size with PTMTnuts of length 450mm, complete all as specified and directed.

S&F 32mm bore PVC waste pipe suitable for wash basin and urinal as reqd complete.

S & F Vitreous China squatting pan and trap, `Orissa` pattern, size 580 x 440 mm white, with integral foot rests i (excluding flushing cistern and flush pipe) complete.

S & F for 10 ltrs capacity PVC Valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle complete.

S & F vitreous China urinal, flat back, half stall type white, with grating and union for discharge including connections complete.

S & F brass chromium plated tubular towel rail, 20mm dia, 60cm long. complete.

S & F 110 mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors/trenches with & including all necessary fittings i.e. socket, bend, tee, junction, trap etc complete.

-ditto- all as per item No 79 here in before but 75mm -ditto-

M & L for 75mm thick cement concrete type D-2 1:4:8 using 40mm graded aggregate , as in sub base. complete all as specified and as directed by the Engineer-in-Charge

M & L for ruberised finish precast coloured concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with Grey cement and no pigment laid over & including 25mm average thickness sand coushning all as specified.

Supplying, laying and testing of 100 mm internal dia of double wall corrugated (DWC) high density polyethylene pipe (HDPE) and stiffness classes 8 (SN-8) with ISI marked (With CML No ) with and including all fittings & jointing materials for sewage line and laid in trenches as specified in IS-16098-2013 part-2 complete all as specified and as directed.

M&L Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated Flame Retardant Low Smoke (FRLSH) Unsheathed 1100 Volt grade multi-stranded Cable drawn through and including Concealed Rigid PVC Conduit, medium grade, ISI marked of suitable size and its Accessories as required at Site, fixing on surface of Wall, Roof, mounted on Sunk Mild Steel Pressed Terminal Box 1.22 mm thick of suitable size duly painted with red oxide metal primer with 3.0mm thick Plastic Laminated Sheet Top Cover for mounting Switches, Sockets, etc. including PVC insulated and unsheathed Single Core multi-stranded Copper Conductor Cable of size 1.5 Sqmm (FRLSH) Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light Point controlled by One 1-Way Switch 5 Amp, complete all as specified and as directed.

-ditto- all as per item No 84 here in before but for one Ceiling fan / Exhaust Fan point controlled by one, one way switch and regulator

-ditto- all as per item No 84 here in before above but 5 amps socket outlet on same board.

-ditto- all as per item No 84 here in before One 5 pin socket outlet 5 Amps on independent board

S & F switch piano single pole flush type 5 amps, 230 volts.complete all as specified and directed.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and directed.

S&F Socket outlet 3 pin, 5A, flush type.

S&F Switch socket combination 2 in 1 3 pin, 5 A flush type universal.

S&F Electronic fan regulator step type, AC, 230V

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with PVC round/squareblockscomplete all as specified and directed.

S & F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified.Make-Make- Havells, Cat No: LHLDEUEBML8Z010 or equivalent in CG or Surya.

S&F pre-wired double door MCB DB made out of 18 SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar , 2+6 way double door open able complete.Make:- L&T, Model -DBSPN006D and equivalent in Legrand and Indo Asian.

S & F MCB Double Pole 32 Amps 240/415 Volt, confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete all as specified and directed.Make- L&T, Cat No: BB20320C or equivalent in Schinder/ Legrand.

S & F MCB SP, 240 volts, 6-32A Amps 50 Hz ,confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete all as specified and directed. Make -L&T,Model No-BB10060C,BB10100C,BB10160C and equivalent in Schinder/ Legrand.

S & F wall mounted LED 18 watts ,Batten type T 5 light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including Ultra bright LED polycarbonate (T8) tube (Single side connection) 4' x 18 watts with G13 lamp holder complete all as directed by Engineer-in-Charge.Model -REGALBATTENT5UPTO1X18WDSBSWH For Batten Fitting and Model-PHOTONULTRAE2.01213T8SSTL18WLED865SPC For T8 Tubelight ,Make Havells, or equivalent in CG, Surya, all as specifed and directed.

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 15 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as directed by Engineer-in-Charge. Make- Havells,Model No - ENDURAPEARLSL25WLED757SASYTOPCMP Or Equivalent in CG and Surya all as specified and directed.

Supply & Laying LT UG XLPE cable of size 2 core x 16 sq mm laid in trenches/ floors/ on wall/ service connections PVC insulated, sheathing and armoured 1100 volts grade with aluminium conductor with necessary end terminal/ cable gland as per site requirement including connecting to the main switches/ cut outs MCB/ MCCB with necessary lugs after cutting to required length of cable all as specified and directed. Make :- Polycab and equivalent in Havells and KEI

Supply and laying well burnt Bricks , locally available best quality (sub class "B" bricks) laid in trenches perpandicular to U/G cable for cable protection complete all as specified.

Supply , spread and filling approved sand in cable trenches for cushioning of LT UG cable 8cm thick before laying of cable & 15cm thick after laying of cable and punning all as specified. NOTE :- Punned thickness of 18cm only will be measured and paid.

Supply & lay GI tubing light grade in protection of cable at road crossing /hard standing/pole protection fixed with clamps as per site requirement etc of size 40 mm dia bore complete all as specified and directed .

S&F S&F heavy duty exhaust fan 300 mm sweep MS Body, 3 wing 1400 rpm, single phase 240volts copper wounds complete with all accessories as louvers shutters etc incl making connection through 3 core PVC copper wire run through flexible pipe. Single phase type Make : Orient or Equivalent in USHA/ Havells.

Supply and fixing 5 star rated BLDC ceiling fans AC 230 Volts single phase 1200 mm sweep complete with all accessories including MS Hook, Nuts, Bolts and washer for hanging arrangement complete all as specified and directed. Make: Usha ,Model- Energia 32 5 Star /Bajaj/Crompton

M&L for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised earth lead wire 4.0 mm dia means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh refilling with vegetable soil without bolders and stones, gravels and aggregate etc,and CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including testing on completion. NOTES : The unit rate includes for protection pipe and GI strip dia from top of earth plate up to 5.00 meter above ground level.

S&F 3 layered (Outer Green Coloured UV Stabalized, Middle Black Coloured UV Stabalized and Inner Most Layer White Coloured with Antimicrobial Property) PP-R (Polypropyelene Random Copolymer) Pipe 63mm Outer dia, ISI marked, SDR 7.4 and SDR 11 UV Stabalised and Antimicrobial Fusion Welded having Thermal Stabality for Hot and Cold Water Supply all PP-R Plain and Brass Threaded Polypropyelene Random Fittings and laid in Trenches, complete all as specified and as directed.Make:- SFMC and equivalent in Reliance and Fusion.

S&F 3 layered (Outer Green Coloured UV Stabalized, Middle Black Coloured UV Stabalized and Inner Most Layer White Coloured with Antimicrobial Property) PP-R (Polypropyelene Random Copolymer) Pipe 32mm Outer dia, ISI marked, SDR 7.4 and SDR 11 UV Stabalised and Antimicrobial Fusion Welded having Thermal Stabality for Hot and Cold Water Supply all PP-R Plain and Brass Threaded Polypropyelene Random Fittings and laid in Trenches, complete all as specified and as directed.Make:- SFMC and equivalent in Reliance and Fusion.

S&F PP-R Gate Valves (Brass Insert) 32mm Outer dia and fixed including taking down of existing unserviceable One, complete all specified and as directed. Make:- SFMC and equivalent in Reliance and Fusion.

S&F PP-R Gate Valves (Brass Insert) 63mm Outer dia and fixed including taking down of existing unserviceable One, complete all specified and as directed. Make:- SFMC and equivalent in Reliance and Fusion.

Cutting of existing CI/DI pipe laid 80 mm dia for inserting Tees for new connection of 80 mm x 63 mm dia all as specified and directed by Engr-in - charge

M&L for connection pieces for inserting 63 mm PPR pipe into 80 mm distribution mains all as specified and directed.

Making connection of PP-R distribution branch with PP-R main of 63 mm size by providing and fixing tee of 63mm x 32 mm including cutting and making fusion joint etc all as specified and directed.

BEE KAAY TRADERS

Markson

bkgeneralstores

M/S RANA ENGINEERING ENTERPRISE

M/S S.S.Corporation