Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.5 LAccepted-AOC DOOR NO 3 79 CHENNNADGRAMAPANCHAYAT PERUMBALA KASARAGOD 681317 | PERUMBALA | KASARAGOD | KERALA | 681317 | L1 | Accepted-AOC BeingL1 | |
| 2 | L2₹40.6 L+₹1.1 L (2.82%)Rejected-AOC GP KIZHAKKAMBALAM KOLENCHERY | THRISSUR | KERALA | 680667 | L2 | Rejected-AOC Not BeingL1 | |
| 3 | L3₹40.7 L+₹1.3 L (3.19%)Rejected-AOC 53 13 A OUTER CIRCULAR ROAD KILPAUK GARDEN COLONY CHENNAI 600 010 | CHENNAI | CHENNAI | TAMIL NADU | 600010 | L3 | Rejected-AOC Not BeingL1 |
Tender Value
₹42.5 L
EMD Value
₹85,000
Closing Date
12 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) (CG) KOCHI
GE(I)(CG)KOCHI BUILDING NO.22/2614, OPP. SANTHOM CHURCH MUNDAMVELI POST RAMESWARAM KOCHI-682 507
IMPROVEMENTS TO BUILDING NO P-1, P-2 AND P-3 AT CGRA KOZHIKODE.
2023_MES_593758_1
8872/E8
Open Tender
Civil Works
Item Rate
180 days
Kozhikode
As per NIT/Tender documents
8 documents required · 8 mandatory
₹500
GE(I)(CG)KOCHI
₹85,000
Yes
11 Jul 2023
8 May 2023
19 Jun 2023
8 May 2023
12 Jun 2023
29 May 2023
8 May 2023 - 15 May 2023
Amount
Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc including removal of debries out side MD land all specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding, removing materials and rubbish off the premises complete all as specified and as directed.
Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches pillars etc, complete all as specified.
Material and labour for Precast cement concrete solid block masonry using soild PCC block grade C4, exceeding 10 cm in width and built in cement mortar 1:6 complete all as per specified and as directed.
Material and labour for rendering 15mm on fair faces of brick or concrete surfaces in CM 1:6, finished even and fair without using extra cement complete all as specified and directed.
Material and Labour for cement plaster 5mm thick in CM 1:3 on concrete surface as on ceilling finished even and smooth with out using extra cement complete all as specified and as directed.
Material and Labour for rendering 15 mm thick in CM 1:4 on brick/concrete surface of walls, finished fair and even surface without using extra cement complete all as specified and directed.
Demolition of concrete surfaces in ground floor and paving n.exc. 15cm thickness (below or above ground level) all as Specified.
Material and labour for providing 25mm thick plain cement concrete 1:2:4 mix type B0, using 12.5mm graded stone aggregate as in under layer to flooring finished rough to reiceve toping complete all as specified and as directed.
Material and Labour for 75mm thick Plain Cement Concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection, floors, pavings and hardstanding etc, finished even smooth without using extra cement etc including necessary forwork and filling the joints with sand and bitumen in 1:1 ratio complete all as specified and as directed.
Material and Labour for vitrified ceramic tiles 8-10 mm thick light shade area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 Sqm, of any shade and any pattern (pattern consists combination of two or more tiles ) as in floor etc jointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 15mm thick screed bed in CM 1:4 and pointed in coloured cement to match coloured tiles complete all as specified and as directed. NOTE: No extra cost sahll be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work.
All as per item No11 above but in vertical surfaces like skiting/dado etc jointed in neat cement slurry and pointed in colored cement to match colour of tiles over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. NOTE: No extra cost sahll be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work.
Material and Labour for non-skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile of size 400 x 400 x 7 to 8mm thick in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. NOTE: No extra cost shall be allowed for removing and re-fixing and necessary cutting of door etc if any required during execution of work.
Material and Labour for glazed ceramic coloured tiles in vertical surface 450x350x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick backing coat in CM 1:4 cmplete all as specified.
Demolition of cement concrete in ground floors and paving ( reinforced) n exceeding 15 cm thicknesses, below or above ground level, complete all as specified and as directed.
Material and labour for preparation of new plastered/concrete surfaces of walls, providing one or more coats of Birla white wall care putty to achieve smooth surfaces and applying two coats of distemper oil emulsion of approved shade/tint over a coat of compatiable priming paint complete all as specified.
Material and Labour for preparing of new ceiling surfaces of any description and applying two coats of acrylic distemper, white or tinted over a coat of primer complete all as specified and as directed.
Material and Labour for preparation of plastered surfaces and applying two coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and as directed. Make: Apex Ultima Protek of Asian/Exel of Nerolac/Weather Coat of Berger
M & L Preparation of old distempered and painted surfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of Distemper oil emulsion on wall surfaces.
Material and labour for preparation of existing treatment of old surface including brooming down , scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on walls and mangalore pattern roof tile and applying one coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of old decorated surfaces of steel of any description exceeding 10 cm width or grith not otherwise specified and applying one coat of syntheic enemal paint all as specified and as directed.
Material and labour taking down chowkhats or frames, without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 sqm in each and removing as directed.
Material and labour taking down chowkhats or frames, without taking off shutters from the frame not exceeding 1.5 Sqm in each and removing as directed.
Taking down shutter of any drescription Not exc 1 sqm in each panes and refixing the same opening complete all as specified and directed.
Taking down shutter of any drescription exc 1 sqm but not exc 2 sqm in each panes and refixing the same opening complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof/wall coverings complete all as specified and as directed.
Supply and fixing pre-colour coated high tensile strength galvalume sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through specialist agency complete all as specified and as directed.
Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through through specialist agency and complete all as specified and as directed.
Supply and Fix powder coated push pull type partly panelled and partly glazed door shutter having top rail of section 44.5mm x 44.5mm x 2.00mm, bottom rail of section 100mmx44.50mmx2.00mm, door vertical style of section 85mm x 44.5mm x2.00mm and lock rail of section 100mm x 44.5mm x 2.5mm with aluminium powder coated frame/chowkat of section 100mm x 44.5mm x 2.5mm including necessary jointing cleats, glazing clips, rubber neoprene packing, snap beading, screws, handles and locking arranement etc. fitted with and including 12mm thick prelaminated particle board, interior grade with decorative lamination on both faces at the bottom half of door panel and 5mm thick sun block(one side reflection) tinted glass on top half portion of door panel complete with handles 2 Nos in each door, hinges complete all as specified and directed.
S&F aluminium ventilator (powder coated with approved colour) partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.20 mm thick, half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete all as specified and directed including taking down old unservicable one
Material and labour for second class hard wood(indian teak wood) plain solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered put together with glued pinned at joints, well seasoned and finished with polishing, fixed to wall and making good to wall carving as approved all as specified and directed.
Supply and Fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specifications complete all as specified and directed.
Material and Labour for 30mm thick factory made flush shutter with solid core construction with block board core and plywood face panels commercial type on both sides including lipping on edges complete all as specified and directed.
Supply and Fix 2nd class HW glazed and skeleton shutters 35mm thk, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed including taking down old unserviceable one.
Supply and fix 100mm long butt hinges medium weight mild steel cold rolled complete all as specified and as directed.
Supply and Fix 100mm long aluminium anodised barrel tower bolt all as specified and as directed by Eng-in-charge.
Supply and fixing 250 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete.
Supply and fixing 300 mm, size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete
Material and labour for Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over pink prime including preparation of new wooden surface all as directed and as specified
Supply and fixing in repair 600 mm long PVC connections 15 mm size with PTMT nuts at both end complete.
Supply and fix waste coupling of PTMT 32 mm size (half or full threaded) suitable for urinals/ WHB/Sink etc (Minimum weight 32 mm - 45 gms) all as specified and as directed.
Supply and fix in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450mm long PVC Connection and connection to trap, and to flushing and making good to floor complete all as specified .
Supply and fix in repair plastic water closet seat cover, black or white, closed pattern with flat bottom, and cover and mild steel aluminised hinging device etc complete all as specified and directed.
Supply and fix in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. Make: SANDHU, EVEREST
Supply and fix in repairs Bib tap cast copper alloy CP , with capstan handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule and fixed, complete, all as specified.
Supply and fix in repairs Angle valve CP cast copper alloy, with capstan handle, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete all as specified and directed.
Supply and fix in repairs Stop valve cast copper alloy, screwed down high pressure with capstan handle, screwed both ends for 15 mm bore iron pipe or for unions and fixed, complete all as specified and directed.
Supply and fixing in repairs vitreous China wash hand basin, white, flat back size 580X450mm including 32mm brass chromium plated waste fitting, a pair of cast iron bracket duly painted including cutting and pinning in ends making good disturbed surfaces in CM 1:3 excluding pillar tap but chain , plug and porcelain stopper, brackets etc complete all as specified and directed.
S&F in repair.Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union complete all as specified and as directed.
S&F in repairs Vitreous china wash down water closet pan ( pedestal pattern ) white complete including ‘P’ or ‘S’ trap , seat cover and fixing of flushing cistern, brackets, flushing pipe etc, complete all as specified.
S&F in repairs Pillars taps, 15mm dia bore cast copper alloy with capstan heads, CP fency type screwed down high pressure with or without lettered'Hot' or cold with long screwed shanks and ly nuts, screwed for iron pipe and fixed complete all as specified and directed
Material and Labour for Granite 18 mm thick of any type work (table rubbed and polished including moulding, grinding ect), and laid over in steps, treads jambs, pillars, window- cills, cooking platforms, other plateforms and like in over and including 15 mm thick backing coat in CM 1:4 and pointing in white cement or colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. NOTE: Material and Labour for rounding to edges of Granite slabs shall be measured and paid separately.
Material and Labour for rounding to edges of Granite slabs one edge, such as in steps cooking plateform, and other similar situation complete all as specified and directed
Material and Labour for Mangalore pattern roofing tile of any direction and in any position laid with cement mortat 1:6 over top of RCC roofing including necessary budding/ filleting complete all as specified including taking down old damaged tiles of any place and in any postion/ direction complete all as specified and as directed.
Excavation in post holes (or similar holes) each not exceeding 0.5 cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil complete all as specified and directed.
Material and labour for Plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete including necessary form work all as specified and as directed.
Supply and fix mild steel angle iron posts and struts etc including cutting tops to shape as directed, drilling holes, including all necessary welding, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F kitchen basket fabricated with stainless steel section (SS-304), best quality (as per sample kept in GE, s office) of size 430 mm x 508 mm x 100 mm for different use such as placing plain plate etc fixed in position with and including one pair telescopic Channel of size 450 mm (when closed), mild steel chromium plated, roller type, heavy duty as directed. Make :Asian sleek cat part No: ASSEPL430505100 or equivalent in Hettich
S&F kitchen basket fabricated with stainless steel section (SS-304), best quality (as per sample kept in GE, s office) of size 430 mm x 508 mm x 100 mm for different use such as placing dish / cup & saucer /cutlery / thali etc fixed in position with and including one pair telescopic Channel of size 450 mm (when closed), mild steel chromium plated, roller type, heavy duty as directed. Make :Asian sleek cat part No: ASSEPCB430505100 or equivalent in Hettich
S&F kitchen basket fabricated with stainless steel section (SS-304), best quality (as per sample kept in GE, s office) of size 430 mm x 508 mm x 200 mm for different use such as placing plain plate etc fixed in position with and including one pair telescopic Channel of size 450 mm (when closed), mild steel chromium plated, roller type, heavy duty as directed. Make :Asian sleek cat part No: ASSEPCB430505200 or equivalent in Hettich
S&F kitchen basket fabricated with stainless steel section (SS-304), best quality (as per sample kept in GE, s office) of size 430 mm x 508 mm x 200 mm for different use such as placing cup & saucer /cutlery / thali etc fixed in position with and including one pair telescopic Channel of size 450 mm (when closed), mild steel chromium plated, roller type, heavy duty as directed. Make :Asian sleek cat part No: ASSETLP430505200 or equivalent in Hettich
Material and Labour for repairing of chajja/roof projectio by taking down old plaster/concrete of any description and making good with cement concrete (nominal mix)1:2:4 Type B0 and finishing the surface with CM 1:3 10mm thick and applying two coats of exterior emulsion (weather coat) paint over a coat of primer complete all as specified and directed.
Supply and fix 50 mm size mild steel body Mortice lock, vertical type, with 2 brass liver, fixed to cub board /aluminium door complete all as specified and as directed.
Supply and fix mild steel nickel coated telescopic drawer slider, one inch size, 18 inch long two beam max load capacity 35-40kg suitable for working table, drawer on andy size and any pattern complete all as specified and as directed.
Supply and Fix 19mm thick plywood 7 ply with BWR type BB, fixed with adhesive and nails as in cubicle cabin/working table etc of any shape to required size, pattern/design of cabin complete all as specified and as directed by Engineer in Charge.
Supply and Fix 12mm thick plywood 7 ply with BWR type BB, fixed with adhesive and nails as in cubicle cabin/working table etc of any shape to required size, pattern/design of cabin complete all as specified and as directed by Engineer in Charge.
Supply and Fix 9mm thick plywood 7 ply with BWR type BB, fixed with adhesive and nails as in cubicle cabin/working table etc of any shape to required size, pattern/design of cabin complete all as specified and as directed by Engineer in Charge.
Supply and Fix 0.90mm thick decorative laminate type I of surface finish of approved colour and pattern consists of combination of twoor more colour, fixed with approved adhesive as per manufacturers instruction finished to approved size for wall cladding/partition/cubicle cabin/working table of any shape of any pattern and design etc complete all as specified and as directed by Engineer in Charge.
Supply and fix Cast brass powder coated automatic lock and release butt hinges of size 100mm complete all as specified and as directed.
Supply and fix Cast brass powder coated Box type decorative door handle of size 75mm complete all as specified and as directed.
Supply and fix Cast brass powder coated Box type decorative door handle of size 100mm complete all as specified and as directed.
Supply and fix IInd class hard wood plain fillets square or rectangular or triangular in section bull nosed, splayed chamfered or rounded on edge or face clean swan of sectional area exc. 6 sqcm and not exc. 13 Sqcm fixed with nails or brads including french polishing over a coat of sealer and wood filler, complete all as specified and as directed.
Supply and fix IInd class hard wood plain fillets square or rectangular or triangular in section bull nosed, splayed chamfered or rounded on edge or face clean swan of sectional area exc. 3 sqcm and not exc. 6 Sqcm fixed with nails or brads including french polishing over a coat of sealer and wood filler, complete all as specified and as directed.
Supply and fix 125mm long butt hinges type B 12, cast brass with mild steel hinge pin, bright polished complete all as specified and as directed.
Supply and fix magnetic Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.
Material and labour for two or more coats of French polishing on wooden surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler complete all as specified and as directed.
Supply, laying or passing through pipe LT, XLPE insulated, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor 1100 Volts grade of size 150 Sqmm 3.5 core including connecting/testing after taking out from trenches/ pole unserviceable LT UG cable complete all as specified and directed.
Supply, laying or passing through pipe LT, XLPE insulated, galvanised steel strip or wire armoured electric power cable (heavy duty) with stranded aluminium conductor 1100 Volts grade of size 120 Sqmm 3.5 core including connecting/testing after taking out from trenches/ pole unserviceable LT UG cable complete all as specified and directed.
Supply and fixing of MCCB 4 pole 415 Volts, 50Hz, 315 Amps, 50 KA with standard sheet metal enclosure, powder coated, siemens grey colour and fixing complete and fixed on a fabricated structure made from angle iron of size 50x50×6 mm size and flat iron strip of size 50 × 6 mm, cutting welding, fabricating, finishing complete including painting of two coats of approved colour of enamel paint over a coat of red oxide primer complete and the fabricated structure shall be grouted in ground in PCC 1:3:6 type C2 using 40mm graded stone aggregate all as directed by Engr-in-charge.
Material and labour for cutting bituminous road not more than 50CMx 50 CM size for laying of pipe or cable and making good with PCC 1:3:6 type C2 using 40mm graded stone aggregate, removing the surplus material away from the site, all as specified and directed by the Engr-in-charge
Supply & Fix 80 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc including clamps, nut, bolt and washers etc after taking out unserviceable pipe complete all as specified and directed.
Supply & Fix 50 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc including clamps, nut, bolt and washers etc after taking out unserviceable pipe complete all as specified and directed.
Supply & Fix 80 mm dia high density polyethylene pipes (HDPE) of pressure rating 6 kg/cm2 for cable protection, fixed to walls, ceilings or laid in floors/ trunches etc including clamps, nut, bolt and washers etc complete all as specified and directed.
Supply & Fix onload changeover switch heavy duty 250 Amps capcity, 4 pole 415 volts 50 Hz in standard sheet metal enclosure, powder coated, siemens grey colour and fixing complete and fixed on a fabricated structure made from angle iron of size 50x50×6 mm size and flat iron strip of size 50 × 6 mm, cutting welding, fabricating, finishing complete including painting of two coats of approved colour of enamel paint over a coat of red oxide primer complete and the fabricated structure shall be grouted in ground in PCC 1:3:6 type C2 using 40mm graded stone aggregate all as directed by Engr-in-charge. Make: Standard Cat No:ISCNFO0400 or equivalent in Havells/Crompton Greaves/L&T/Indoasian
Supply, install, test and commision LT panel board, indoor type, factory made, powder coated , dust and vermin and weather proof, Cubicle type made out of 2 mm thick CRCA Sheet & MS angle iron section of 50X50X6 mm frame, front operated with locking arrangements. The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands and provision for louvers and air vent gasket for natural flow of air. The panel board shall have suitable busbar chamber having sufficient space to pass through UG Cables and have compartments for each control gear and metering devices. Providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size 'F' class insulators made on non hygroscopic, non combustile, track resistant, high strength FRP/SMC/DC material at an interval of not more than 300 mm through out the length of the TP bus bar all as specified and directed by the Engr-in-Charge with and including the following:-.
METERING UNIT:- a) LED/Neon indicator bulb in RYB Colour - 1 Set. b) Digital Multifunction meter 01 No c) CT's - 315/5A, CL-1, 15VA-1set INCOMING :- d) Front Handle type Changeover Switch 320 Amps Capacity - 01 Nos (Cat No: ICAS-0320 of indoasian) e) MCCB 4 Pole, 415 V, Adjustable type, 315 Amps with breaking capacity 36 KA - 01 Nos (Cat No: F3 FRAME-830395 of indoasian)
OUT GOING: f) MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA - 01 Nos (Cat No: F3 FRAME-830335 of indoasian) g) MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA - 03 Nos (Cat No: F3 FRAME-830334 of indoasian) h) MCCB 4 Pole, 415 V, Adjustable type, 125 Amps with breaking capacity 36 KA - 03 Nos (Cat No: F3 FRAME-830333 of indoasian) j) MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 36 KA - 02 Nos (Cat No: F3 FRAME-830332 of indoasian)
Note: (a) The quoted rate includes the cost of sutable foundation PCC 1:2:4 type B1 (using 20mm graded stone aggregate) pedestals recommended by the manufacturer of panel board. (b)The quoted rate includes connecting the cables from the existing panel board after taking out the cable glands and connecting the same in the new panel board all as directed by Engineer-in-charge (c) The quoted rate includes the cost of suitable cable glands for the cable connections all as directed bv Enar-in-charae. (d) The quoted rate includes Copper busbar for 3 phase, 440 volts, 50Hz, 4 wire system of rating 1000 Amps for phases and 500 Amps for Neutral.
Schedule of Credit (Minus) Rs.48180.00 NOTE: Bidder shall insert credit amount of Rs. 48180.00 as rate in Green field under Col-13.
VIJAY CONSTRUCTIONS
M/s.Sai Agency
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .