Repair and maintenance of Diesel Generating Sets, AMF Panels, Fire Fighting and Fire Alarm System at INS Valsura Jamnagar

M&L for attending 'B' check of DG set of capacity 63 kVA (Make : Greaves) at different locations to carry out maintenance/servicing as given below once during the contract period as ordered including testing on completion of the following complete all as directed:- (i) Check and clean engine, alternator battery, instrument panel, AMF panel, Timer, Contactors, Meters and others etc. (ii) Tightening of all nuts & bolts of DG set and its accessories. (iii) Check for any diesel leakage from any point and rectify if observed. (iv) Check and adjust fan belt tension, replace the fan belts if found damaged. (v) Check leakage of smoke from exhaust system/ silencer, Repair if required. (vi) Check electrical connections of engine. The wiring shall be maintained properly and engine starting system from engine instrument panel shall be kept in order. (vii) Check and tighten the AVM pads nuts and bolts, change AVM pads if found damaged. (viii) Check exhaust pipe, flange and lagging Repair if found damaged. (ix) Check output of alternator, if found OK adjust the same to specified values in case of brush type. (x) Checking of all hoses and cleanup, if required. (xi) Oiling, Greasing and checking for proper & smooth functioning. (xii) Change of Air filter element with ‘O’ ring. (xiii) Change of filter insert with ‘O’ ring (xiv) Change of Lubricating oil filter. (xv) Change of Primary filter element. (xvi) Change of secondary filter element. (xvii) Change of greaves Lub oil CI4- 10 ltrs pack (xviii) Change of Radiator pre-mix greaves KOOL 10 ltrs, complete to the satisfaction of Engineer -in-charge. Notes :- (i) Unit rate quoted by the tenderer shall be deemed to include for minor spares/extras required for replacement to make the DG set fully functional. The decision of Accepting officer regarding minor spares/ extras shall be final, conclusive and binding. (ii) All T&P shall be arranged by contractor and rates for the same shall deemed to be included in rate quoted.

All as per serial item No. 1 here-in-above, but DG set of capacity 100 kVA Make: Greaves

All as per serial item No. 1 here-in-above, but twice during the contract period and change of greaves Lub oil CI4- 20 Ltrs pack complete for DG set of capacity 160 kVA Make: Greaves

All as per serial item No. 1 here-in-above, but twice during the contract period and change of greaves Lub oil CI4- 20 Ltrs pack complete for DG set of capacity 250 kVA Make: Greaves

All as per serial item No. 1 here-in-above, but twice during the contract period and change of greaves Lub oil CI4- 20 Ltrs pack complete for DG set of capacity 125 kVA Make: Greaves Power

All as per serial item No. 1 here-in-above, but once during the contract period and change of Cummins Lub oil CI4- 20 Ltrs pack complete for DG set of capacity 160 kVA Make: Jakson

M&L for attending 'B' check for DG set of capacity 15 kVA (Make: Kirloskar) at different locations to carry out maintenance/ servicing as given below once during the contract period as & when ordered including testing on completion of the following complete all as directed :- (i) Check and clean engine, alternator battery, instrument panel, AMF panel, Timer, Contactors, Meters and others etc.(ii) Tightening of all nuts & bolts of DG set and its accessories. (iii) Check for any diesel leakage from any point and rectify if observed. (iv) Check and adjust fan belt tension, replace the fan belts if found damaged. (v) Check leakage of smoke from exhaust system/ silencer, repair if required. (vi) Check electrical connections of engine. The wiring shall be maintained properly and engine starting system from engine instrument panel shall be kept in order. (vii) Check and tighten the AVM pads nuts and bolts, change AVM pads if found damaged. (viii) Check exhaust pipe, flange and lagging, repair if found damaged. (ix) Check output of alternator, if found OK adjust the same to specified values in case of brush type. (x) Checking of all hoses and cleanup, if required. (xi) Oiling, Greasing and checking for proper & smooth functioning (xii) Change of Spinon Lub oil filter (xiii) Change of air cleaner element (xiv) change of Belt- AVX 10 1500 (xv) Change of fuel filter element (xvi) Change of KOEL care premium genuine oil 7.5 Ltrs , complete all as specified and directed by Engineer-in-charge. Notes :- (i) Unit rate quoted by the tenderer shall be deemed to include for minor spares/extras required for replacement to make the DG set fully functional. The decision of Accepting officer regarding minor spares/extras shall be final, conclusive and binding. (ii) All T&P shall be arranged by contractor and rates for the same shall deemed to be included in rate quoted.

All as per serial item No. 7 here-in-above, but change of V Belt cogged- AVX10 1265L blower pulley, Change of V Belt cogged-AVX10 1136 for alternator pulley and Change of KOEL care premium genuine oil 13 Ltrs Can, complete for DG set of capacity 40 kVA Make: Kirloskar

All as per serial item No. 7 here-in-above, but change of V Belt cogged- AVX SERIES blower pulley, Change of V Belt cogged-AVX for alternator pulley and Change of KOEL care premium genuine oil 40 Ltrs Can, complete for DG set of capacity 380 kVA Make: Kirloskar

M&L for attending 'C' check of DG set of capacity 63 kVA (Make : Greaves) at different locations to carry out maintenance/servicing as given below once during the contract period as & when ordered including testing on completion of the following complete all as directed: (i) Check and clean engine, alternator battery, instrument panel, AMF panel, Timer, Contactors, Meters and others etc. (ii) Tightening of all nuts & bolts of DG set and its accessories. (iii) Check for any diesel leakage from any point and rectify if observed. (iv) Check and adjust fan belt tension, replace the fan belts if found damaged. (v) Check leakage of smoke from exhaust system/silencer, repair if required. (vi) Check electrical connections of engine. The wiring shall be maintained properly and engine starting system from engine instrument panel shall be kept in order. (vii) Check and tighten the AVM pads nuts and bolts, change AVM pads if found damaged. (viii) Check exhaust pipe, flange and lagging, repair if found damaged. (ix) Check output of alternator, if found OK adjust the same to specified values in case of brush type. (x) Checking of all hoses and cleanup, if required. (xi) Oiling, Greasing and checking for proper & smooth functioning (xii) Change of Gasket set 4G11TA (w/o Head gasket) (xiii) Change of cogged belt AX43-1143L (xiv) change of pipe turbo oil supply (xv) Change of pipe turbo drain (xvi) Change of set of hoses for 4G valve (xvii) Change of setting screw (xviii) Change of hex nut M8x1 DIN934 (xix) Change of gasket for PDC rocker cover (xx) Change of set of flex F/P (xxi) Change of push rod. Notes :- (i) Unit rate quoted by the tenderer shall be deemed to include for minor spares/extras required for replacement to make the DG set fully functional. The decision of Accepting officer regarding minor spares/extras shall be final, conclusive and binding. (ii) All T&P shall be arranged by contractor and rates for the same shall deemed to be included in rate quoted.