A/R and M/O to various roads under SRD Project Division-1 during 2022-23. (SH Repairing and maintenance of Apertances and Civil infrastructure of Main Chandni Chowk Road and adjoining inter connected roads.)

Amount

Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

a) All kinds of soil

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

All kinds of soil

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia.

Centring and shuttering including strutting, propping etc. and removal of form for :

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Thermo-Mechanically Treated bars grade FE 500 D as per IS1786

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately).

All works upto plinth level

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

Cement mortar 1:6 (1 cement : 6 coarse sand)

Stone work ashlar sunk or moulded or sunk and moulded Road Kerb stone of required size in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade

Red sand stone

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing stainless steel ( Grade 304) railing , Grating etc made of Hollow tubes, channels, plates, bars etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainlesssteel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.

Size of Tile 600x600 mm

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,

Single socketed pipes.

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Coupler

110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Water thinnable cement primer

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.

1:3:6 or richer mix

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge.

In cement mortar

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

In cement mortar

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.

With granite stone of area less than 0.50 sqm.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe 40m dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing toilet paper holder

C.P Brass

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:

White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with lamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work – Exposed on wall

20 mm nominal outer dia .Pipes.

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length

15 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

(a)15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

a)15mm nominal bore

Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) :

a ) Rectangular manhole 120x90 cm with circular cover 560 mm dia of grade HD - 20

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

a) For fixed portion

i) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

i) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): a) With float glass panes of 5.50 mm thickness

Providing and fixing 10x10x15.0 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in-charge.

Providing and laying gang saw cut 30 mm thick, Flame finished and machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.

a) With granite stone of area less than 0.50 sqm.

Providing and fixing Red sand stone bollards with chamfered edges/ cylindrical/ in hand tooled smooth finish as/design of size 300 mmx300mm square at bottom and equavilent octagonal base, 900mm over all height embedded 300mm depth in cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including necessary excavation of size 500x500x450mm deep for the same in fixed on edges of bitumens road, footpath , concrete pavement area as specified spacing all complete as per standrad drawing & direction of Engineer-in-charge (CC 1:2:4 & excavation shall be paid seperatly).

Providing and fixing Red sand stone SEAT of size 0.35x0.35x1.50m long or required sizes laid on base block of same stone with chamfered edges & smooth finish as per design 100mm depth embedded in cement concrete 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including necessary excavation of size 500x500x250mm deep same in fixed on footpath , concrete pavement area as specified spacing all complete as per standrad drawing & direction of Engineer-in-charge (CC 1:2:4 & excavation shall be paid seperatly ).

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :

a) Inside size 90x80 cm and 45 cm deep excluding cover with frame

Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design :

a) 0.91 m deep with FRP cover and frame, fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :

i) With F.P.S. bricks class designation 75

Constructing brick masonry circular manhole 1.22m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design :

a ) 1.68 m deep with FRP Cover and frame fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) :

i ) With F.P.S. bricks class designation 75

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) without cover with frame R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand (Zone III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:

a) Inside dimensions 455x610 mm and 45 cm deep excluding cover with frame

Providing and fixing of Merino internal wall cladding, is a decorative compact HPL Laminate in 8mm thickness as per EN 438 -6 Type EDS (Exterior Durable Standard) / EGS ( Exterior General Standard) manufactured using specially treated acrylic resins under high pressure and temperature & hardened into sheets, thus providing all weather protection and UV Resistance or equivalant on an existing frame work of Aluminium powder coated Sub Structure of Aluminium Cube Channel (excluding thecost of aluminiunm frame). All complete as per specifications and standard of manufacturer & complete as per standerd design & direction of Engineer in charge.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

AKE : Jaquar; MODEL NO. : CNS-WHT-WH10; EWC, S-trap (390mm x 350mm x 505mm) or equivalent

Providing and fixing C.P brass ablution faucet (health faucet) comprising hand held shower with operating lever, 1 m long flexible tube and wall hook all complete.NOTE: Faucet shall meet Green Building/ GRIHA certification requirement for flow.

MAKE : Jaquar; MODEL NO. :Continental or equivalent

Providing edge moulding to 30 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Granite work

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Granite work

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately).

(a)Stainless steel (304 grade) 300x20mm C-type handle

Providing and fixing satainless steel tower bolts as per standard design with necessary steel screws etc. complete :

Providing and fixing carbon steel galvanised fastener including drilling/cleaning of hole with diamond core drill ,in frame , concrete/masonry/granite work etc. as per direction of Engineer-in-charge.

Providing and fixing C.P brass grating of approved quality

(a) Circular type 100mm dia

Providing and fixing stainless steel 100mm mortice latch & lock with 6 levers and a pair of stainless steel handles as per sample approved by architect and engineer-in-charge.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

Parryware Oval shape counter wash basin Super Special colours Size 550 x 445 x 190 mm

Providing and fixing machine cut, mirror/eggshell polished granite stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge.a. (a) 18 mm thick granite stone slab.

Extra for Providing and mixing colour pigment @ 4.00% by weight of cement in cement concrete of M-40 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, all complete as per direction of as per direction of Engineer-in-charge

Providing and fixing stainlees Steel grade 316 perforated drain cover for carriage way made of frame work 100x100x10 mm angle 75x75x6 mm horizontal angle box and 75x10 mm flate in vertical with 75x6 mm flat for hold fast including welding. cutting, hoisting, fixing in position as per Architecturel drawing and direction of Engineer -in - charge.

Extra for stone work ashalr sunk or moulded or sunk and moulded or carved in Circular or polygonal pillars bollards work on agmt item no 10.14 as per architectural drawing and direction of Engineer in charge.

Grouting/ Filling the joints of 30mm thick Stone flooring having joints of 6 mm width, using White cement morter 1:3 (1 white cement : 3 marble dust / powder ) with pigment to match the stone shade i/c curing and finishing complete as per direction of Engineer-in-charge.

Deduct for not grouting the joints with white cement and matching pigment in 30 mm thick granite stone flooring in agreement item no.8.05 as per architectural drawing and as direction of Engineer-in-Charge.

Supplying and placing Red sand stone rectangular planter of size 950 x 650*Height 600mm as per design approved in Architectural drawing & direction of Engineer in charge.

Providing and laying 100mm flamed finish Granite stone flooring over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) for saucer drain and similar works as per architectural drawing,jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge

Engraving work for water pattern , calligraphy, with laser Engraving process depth up to 6 mm on the faces of red sand stone etc.including all necessary operations complete as per approved Drawings & direction of Engineer in Charge.

Extra for making curvature Saucer drain 350mm wide 50 mm depth(Varing from 100 mm to 50 mm in center)including rubbing finishing etc. in 100mm granite stone flooring as per Architectural drawing and direction of Engineer in charge.(The cost of 100 mm thick granite stone flooring shall be paid in respective item seperatly)

Extra For making Red sand stone planter base in sand stone 500 mm dia and 200 mm height as per approved design as per Architectral drawing & direction of Engineer in charge.

Providing and laying in position polysulphide sealing compound including primer for expansion joints etc.

Using polysulphide sealing compound

Supply Installation testing commissioning of SS Storage Tank 300 LTR. SS 304 Puff insulated. Fabricated As per technical Shared By Engineers in charge.

HPN System to generate 3-5 kg inlet water pressure for 6 points of drinking water fountain. With the header of 100 meter on surface, require flow rate of water 600 ltr/hr. With CRI pump and global - Pressure wave- hydropneumatics Pressure tank. With One Working and one stand By. With Automatic Operation.

Providing and fixing of pole mounted street signage made of 1200x150mm size 1.5mm thick MS sheet porcelain enamelled fixed at required height,street name in four regional languages such as (Hindi,English,Urdu & Punjabi) fixed on C.I/MS Frame with nuts & bolts or by rivets as shown in drawing and as per direction of Engineer-in-Charge(Cost of C.I/MS Frame is excluding)

Providing and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge i/c engraving letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D4956-01 and fixing on Stainless steel frame.Fixing of the same by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 250 mm centre to centre all along the periphery as well as in corners.including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.(Stainless steel frame work including SS plate,fastener and SS Vertical Circular pipe post to be paid separately. Rectangular area of the sheet only shall be measured for payment).

Providing and fixing retro reflective sheet type IV stickers of size 480x300mm of superior quality for dust bins indicated ''DRY WASTE/WET WASTE COMPOSTABLE, to be fixed/pasted on dustbins by chemical adhesive after cleaning surface of dustbins by water based cleaner as per direction of Engineer-in-charge.(excluding the cost of dust bins which shall be paid saperately.)

Providing and fixing Tank nipple of standard design complete.

(a) 25mm nominal outer dia

Providing and fixing/installation of napkin vanding machine complete in all respect as per direction of Engineer-in-Charge.

Providing and fixing Napkin disposal/ incinerator machine complete in all respect as per direction of Engineer-in-Charge.

Providing and fixing Feed back machine wall maunted with fixtures etc.complete as per direction of Engineer-in-charge.

Providing and laying 50mm thick flame finish Granite stone over stainless steel frame base. all complete as per direction of Engineer in Charge. ( stainless steel frame paid separately)

Providing and fixing stainless steel tactile strips (linear grade) of size 280mm long 35mm wide and 5mm thick having stems of size 6mm dia and 12mm long fixed on granite stone floor as length wise 4 nos.strips in 300x300 mm space having equal & correct space between each other strips.Drilling holes 10mm dia and 16mm deep by electric drill machine using suitable size of diamond bit and cleaning the holes by air compressor and brush etc.for each unit and filled up the hole with high strength polyster rasin adhesive and place the tactile strip over the filled up holes and press it with PU hammer i/c cleaning the floor and removing the extra chemical alround strip complete as per direction of Engineer-in-charge.

Providing and fixing stainless steel tactile studs 36 nos. in a space of 300x300mm at equal distance in correct and accurate spacing bothways between each unit.the stud size 35mm outer dia,25mm inner dia and fixing stem of 12mm long and 6mm dia fix on granite stone flooring by drilling hole 10mm dia and 16mm deep by electric drill machine using suitable size of diamond bit and cleaning the holes by air compressor and brush etc.for each unit and filled up the hole with high strength polyster rasin adhesive and place the tactile studs over the filled up holes and press it with PU hammer i/c cleaning the floor and removing the extra chemical alround studs complete as per direction of Engineer-in-charge.

Providing and fixing Factory made powder coated aluminium louvered grill matching with powder coated aluminium tubular frames and fixed to frame with steel screws complete as per direction of engineer-in-charge.(excluding the cost of aluminium frame and fixing to wall with fastners which will be paid for saperately(area of louverd grills to be measured for payment.)

Providing and fixing C.P. brass Tissue paper holder with C.P. brass screws etc. complete as per direction of Engineer-in-charge.

Providing and fixing CP brass towel ring of approved brand and make Jaquar/ Kohler/Roca or equivalent complete as per direction Engineer-in-Charge.

Providing and fixing Automatic hand dryer with sensor etc.complete as per direction of Engineer-in-charge.

Providing and fixing C.P brass liquid soap dispensor with bottle and C.P brackets fixed towall complete as per direction of Engineer-in-charge.

Providing and laying Cement concrete pavement of mix M-40 with design mixed concrete from batching plant. cement content as per design mix, using coarse sand and graded stone aggregate of 20 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and screed board vibrator and finally finished by floating, brooming with wire brush,

levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion,construction & longitudinal joints ( 10 mm wide x 50 mm deep) by groove cutting machine ove agmt item no 10.03 etc. complete as per specifications and directions of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-40 is @ 450 kg/cum.

Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.

Note : 1) Excess/less cement used than specified in this item is payable/ recoverable separately.

M-10 grade plain cement concrete (cement content considered @ 240 kg/cum)

Providing a S.S. 304 GRAB BAR - 600 mm and of DIA: 32MM, Brush/matt finished and thickness 1.5mm , of the Prosafe brand and make and to be installed on the rear wall of the WC, at the specified location as per accessibility standards and and to be installed firmly as per the installation instructions of the product issued by the manufacturer and using the specified hardware and as per the direction of the engineer in charge

600 mm long

Providing and fixing map panel indications the map on chandni chowk & surrounding) red sand stone size 1800x1200mm fixed on both sides of MS square tube & MS angle frame including engraving on both sides of red sand stone (text and graphics) including painting engraved graphic black synthetic enamel paint as per standard drawing.MS angle frame shall be mounted on two nos.vertical MS tube post embeded in CC blocks as per direction of Egnineer-in-Charge (excluding the cost of MS Angle frame, MS tube and C.C blocks which shall be paid separately in other relevant items)

B P Rai and Sons