Supply installation testing and commissioning of VT pump sets having discharge 36m3hr head 20 meter SF CF Pump set having discharge 34m3hr of 84 meter moter control panel 3T triple chain pully and other allied work at Kharka Water Supply Scheme

S/F one set 25 HP C/F pump set, Repairing of 25 HP C/F Motor Pump Set,S/F Motor control panel, ,S/F of 7.5HP VT pump set ,Repairing of 7.5 VT Pump Set ,S/F of 3 T Chain pully, Power wiring other allied works at Kharka Clear water supply scheme

Mechanical & Electrical Work at WTP

Supplying all labour tools and tackles for complete dismantling and opening of 25 HP 3 phase inducting motors Make Kirloskar, cutting burnt wire and rewinding supper enameled copper wire, insulating paper, tape bamboo stick etc. Heating Varnishing and testing on full load at site including transportation charge after deducting the cost of scrap materials (burnt wire Wt. 18 Kg approx.) for both set

Cost for supplying labour, tools and tackles for repairing of C/F pump of 25HP pump sets with opening and refitting after repairing with S/F of new rotating unit complete having C.I impeller, shaft, neck ring, bearing, bearing housing etc. all complete with transportation charge.

Supply, installation, testing and commissioning of horizontal casing centrifugal pump sets with alied equipment. Horizontal Split Casing Centrifugal Pump [make: Kirloskar/Jyoti/ Worthington/ Mather & Platt] , capable of discharging required flow against required Head-as below. mounted on common base plate and coupled with TEFC, squirrel cage induction motor, rating of motor 15% more BHP than that of pump, operating on 1500 rpm, 415V, 50Hz [make: Kirloskar/ABB/ Jyoti/Crompton Greaves/BHEL] pressure gauge, required size of Motorised sluice valve and non-return valve, standard fittings etc. including construction of MS Suction and delivery header, jointing it with Suction and Delivery line by providing required MS/CI pipes, flanges, reducer and specials, nuts bolts, packings etc. all complete as per the requirement, standards and instruction of E/I.(Contrator will again have to check the design of motor,pump & get it approved by the Deptt.) Discharge 34 m^3/hr Head 84M ,25HP

S/F of coupling unit suitable for 25HP pump set at site

Motor control panel having FASD Starter-2 nos supplying and fitting suitable for 25HP C/F Two Pump sets.

S/F 200 Amps Busbar Make-L&T /Hevells or reputed brand.

Cost for S/F of change over switch 200 amp of L&T, Havell’s make ISI mark ..

Power wiring with required 35 Sq mm 3core 1.1KV, Grade unarmoured copper cables XLPE/PVC insulated unarmoured cable from Power distribution Panel (MCP) to motors, including laying on wall or on floor as where required jointing and making proper terminations, etc. all complete.