Providing iron shutters to Kalayamkolumbu VCB in Nallepilly Panchayath

Amount

Embedded Parts,Shutter and Hoisting Mechanism

od11453/2019_2020/MH : REMOVING OF WASTE , Mud , Debris, Etc by manual means, including loading, transporting, unloading to dumping area or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved

15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.8 : Reinforced cement concrete work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with 1:11/2:3 (1 cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)

13.1.2 : 12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

85.101 : Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

od11447/2019_2020/MH : Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track,Seal seat etc as per approved specifications, drawings and directions of deptl officer at site including cost of all materials,labour,machinery for welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete

85.102 : Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.107 : Supply of MS round bar including cost of conveyance charges

85.103 : Supply of MS checquered plates including cost of conveyance charges

od44127/2019_2020/MH : Supply of 32mm GI Pipe for fabricating new handrails for the canal shutter platform

od44128/2019_2020/MH : Supply of 50mm GI Pipe for fabricating new handrails for the canal shutter platform

od44165/2019_2020/MH : Hire Charges of Diesel Generator set at site (Maintenance of Canal Shutters)

od44169/2019_2020/MH : Leading of materials to canal site including the cost of labour etc complete.

od11403/2019_2020/MH : Fabrication, erection and commissioning of Structural steel Embedded parts for Canal shutter in IS2062 Grade and accessories as per approved specifications directions of deptl officer at site including cost of labour , machinery , incidental and handling charges etc complete but excluding cost of material already supplied.

od11405/2019_2020/MH : Fabrication and supply of Structural steel canal gate and accessories as per approved specifications and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied

od44131/2019_2020/MH : Fabrication and erection of GI Handrail and accessories as per approved specifications, and directions of deptl officer at site including cost of labour , machinery , incidental and handling charges etc complete but excluding cost of material already supplied

od44164/2019_2020/MH : FABRICATION OF HOISTING BRIDGE UNIT in Structural Steel confirming to IS2062 as per approved specifications and directions of departmental officer at site including cost of labour ,machinery , incidental and handling charges etc complete but excluding cost of material which already supplied.(FOR CANAL GATES - )

85.116 : Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the gates including cost of SS bolts and nut all labour and machinery and incidental and conveyance charges complete as per approved specification and drawing

85.118 : Supplying and fixing in correct position with specified initial interface L-type / bulb nose rubber seal confirming to IS11855 to the gates including cost of SS bolts and nuts and all labour and machinery and incidental and conveyance charges complete as per approved specifications and drawings

od11406/2019_2020/MH : Providing EN-8 screw rod 7.50 tonne capacity 1 M lift screw hoist having one number of EN -8 screw shaft having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all materials, labour, hire charges and conveyance.

85.114 : Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

85.115 : Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

od11452/2019_2020/MH : Providing of WORM & PINION having a lifting speed of around 5cm/min for 24 RPM of hand operation including cost of all materials, labour, hire charges and conveyance (Canal Shutters)

od11454/2019_2020/MH : Cost of supplying and fixing of Screw rod LOCKING ARRANGEMENT including cost of materials,labour and conveyance complete.

od11455/2019_2020/MH : Erection and trial run for the Canal Shutters, Hoisting unit assembly , Screw rods, Ladder etc. including cost of materails, labour, conveyance etc complete

SAI ENGINEERING

Bidder Name

ASHIFUL HAK.C

SAI ENGINEERING