PROVN OF 04 X ATTACH BATHROOM AND LATRINE ALONGWITH SEWERAGE LINE AND 02 X SINTEX WITH WATER CONNECTION AT BLDG NO P63 SINGLE JCOS LIVING ACCN (9034/E8)

Amount

Note for all above items:-All items in BOQ are for"Materials and labour /Supply/fixing and laying" and to be executed in "Repairs" unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are required to quote their rates accordingly.

Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level) complete all as specified & as directed.

PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in flooring,path, foundation etc complete all as specified and directed.

50mm thick PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection or similar places, without using extra cement complete all as specified and directed.

Machine made precast cement concrete blocks (interlocking paves) of 60mm thick (rubberised) with 6mm top layers of material laid over 25mm thick sand cushion . The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than 350 Kg/Cm2 complete all as specified and as directed.

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & as directed.

Cutting in to old masonry to form toothings for bonding in new brick or stone work including making good in cement mortar 1:6 complete all as specified and as directed.

Squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 complate all as specified and directed.

All as per item No 8 above but except stone complate all as specified and as directed.

PCC 1:2:4 solid building blocks 10 cm thick type B1 (Using 20mm graded Crushed Stone aggregate) set in cement mortar (1:6) complete all as specified and as directed.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed complete all as specified and as directed.

Non-skid coloured ceremic tiles (1st quality) joint less 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match the shade.including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed Make : Kajaria/Orientbell/Somany.

All as per Item No 13 above but in skirting including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

18 to 20 mm thick machine cut Kota stone in self and other places etc laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including cutting, rubbing and polishing complete all as specified and as directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chajja etc finished even & smooth complete all as specified & as directed.

15mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface complete all as specified & directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar complete all as specified

Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 complete all as specified.

Preperartion of newly plastered surfaces on wall and applying one coat of wall putty with fair finished and even surface and applying two coat of oil bound distemper complete all as specified & directed.

Material and labour for complete removal of existing distempered surfaces of walls and applying two coats of oil emulsion distemper of white shade or other approved shade over two coat of birla white putty on plastered surface all as specified and as directed.

Three coats of white wash on newly plastered surface of wall including preparation of serfaces complete all as specified and as directed..

Three coats of white wash on newly plastered/unplastered surface of ceiling including preparation of serfaces complete all as specified and as directed.

One coats of white wash on old surface of wall including prepration of surface complete all as specified and directed..

One coats of white wash on old surface of ceiling including prepration of surface complete all as specified and directed.

Two coats of colour wash on newly plastered/ unplastered surfaces over one coat of white wash on wall & including preparation complete all as specified and as directed.

One coats of colour wash on old surfaces including preparation complete all as specified & directed.

Applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

Applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces completeall as specified and as directed.

Taking down chowkhats or frame exc 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.

Pressed steel frames for doors size 165x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed

Pressed steel frames for doors size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified.

Mild steel framed work as in brackets etc for coller stands framed steps/stairs, chajja etc complete using MS angle iron Steel bars gusset plate incl cutting holes for cooler stand and chajja etc complete all as specified & directed .

Supply and fabrication of Mild steel guard bars and welded to window frames all complete all as specified and as directed.

MS chromium plated peg set of five fixing with wall complete all as directed.

Fabrication of pressed steel cupboard shutters using 1.00 mm thick MS plain sheet & with frame 1.25 MM thick bent to shape incl two coats of synthetic enamel paint on int surfaces & two coats of hammer tone finish on external surfaces alongwith locking arrangement mortice lock handle etc complete all specified and as directed.

35mm thick factory made second class hardwood glazed and Skelton door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-1991 section 8 clause 8.24 (a) and as directed.

35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Taking down old wooden/ steel window/ventilator complete all as directed.

Box type steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete with or without cooler opening all as specified incl repair to jams etc complete all as directed by the Engineer-in-Charge

Box type steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars complete with or without cooler opening all as specified and as directed incl plastering to jambs etc complete all asdirected by the Engineer-in-Charge

Steel ventilator top hanging bars with box type hinges with steel handle, and steel peg stay, complete for glazing dovetailed or welded complete all as specified and as directed.

Steel ventilator top hanging bars with box type hinges with steel handle, and steel peg stay, complete for gauze dovetailed or welded complete all as specified and as directed.

Aluminium anodized,tower bolt 200 mm long complete all as specified and as directed.

Aluminum anodised handle extruded section of size 150mm long complete all as specified and as directed.

Aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and directed.

Mild steel butt hinges 100 mm size complete all as specified and as directed.

100mm size single action door spring hinge complete all as specified and as directed.

Floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 40mm long complete all as specified and as directed.

4 mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty complete all as specified and as directed.

3 mm thick plain glass ordinary quality & glazing complete all as specified and as directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm complete all as specified and as directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm with necessary fitting on steel/ wooden surface complete all as specified and as directed.

PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in hold fast or for filled in door frame etc and iron fixing including necessary form work complete all as specified and as directed.

Flat iron for hold fast and similar work confirming to Fe-290 Gde-E-165 fixed with welding complete all as specified and as directed.

Decorative 25mm thick, MS with PVC coated curtain rod with fixing brackets, knob etc as in repairs complete all as specified and as directed.

Sand stone slabs in sunshades, chajjas, shelves, cills, landings cover stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness of slab 5cm complete all as specified and as directed.

Supply only Integral water proofing compund ISI Marked complete all as specified and as directed.

Roof treatment in the following stages :- (a) first Course : M&L for 10 mm thick plaster with CM 1:3 mixed with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately) (b) Second Course : One coat of bitumen primer T-10/polymerised confirming to IS 3384 @ 0.30 ltr/Sqm (c) Third Course : One coat of Bininding material using blown type bitumen conforming to IS 702 grade 85/25 @ 1.20 Kg/Sqm (d) Fourth Course : A layer of APP membrane polymeric membrane centre core of 100 micron HMHDPE outer film 20 micron each, thickness 2 mm having weigh 3.00Kg/Sqm (e) Fifth Course : A coat of bonding materail using blown type bitumn conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm (f) Sixth Course :40mm thick PCC 1:2:4 padding, well compacted using 20 mm graded aggreegate with groovs shall not be exceeding 0.40 Sqm and grooves shall be filled with bitumen

Machine made precast cement concrete curb stone blocks using Cement concrete 1:3:6 type C1 20mm graded crushed stone agg all as directed by Engr-in-Charge.

Best quality Full size 6mm thick mirror of size 365x1.22 complete all as directed.

2mm thick fiber glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with 'J' type bolts complete all as specified and as directed.

1.00 mm thick MS Sheet as in covering to door shutters etc sheet shall be fixed with door frame by appropriate size of revets/welding complete all as spepcified & as directed.

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples incl fixing of wooden battens around the wiremesh in ventilators and finished complete all as directed

Glazed colour ceramic tiles (1st quality) of size 250x350x7mm, laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles over 10mm thick rendering in CM 1:4 over stone masonary surfaces incl finishing the surface fair & rough to receive tiling etc complete all as specified and directed Make : Kajaria/Orientbell/Somany.

Reinforced cement concrete M-25 (design mix ) as in slab supported on wall or beam etc complete all as specified and as directed.

Reinforced cement concrete M-25 (design mix ) as in beam, contilevers , bressummers, lintel overone meter span complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

Mild steel TMT bar 10 mm dia and over cut to length bend to shape required cranking bending spirely for hooking ends and binding with and including mild steel wire (annealed ) not less than .90 mm dia or securing with clip complete all as specified and as directed.

Mild steel TMT bar 5 mm dia and over up to and including 10 mm dia in stirrups spaces and binders cut to length bend to shape required cranking bending spirely for hooking ends and binding with and including mild steel wire (annealed ) not less than .90 mm dia or securing with clip complete all as specified and as directed

Taking down existing old Tar-felt from RCC roof, stone roof in any thicnes etc carefully including cleaning the roof surface by wire/coir brush and remouving all grits, stones, fungus , moss and finally washing down with water to the entire satisfaction of Engr-in-Charge complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C-0 (using 12.5mm graded stone aggregate) as in roof padding, filling depression, junction of roof slab & parapets, curbs etc including necessary from work complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.

20mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) complete all as specified and as directed.

15mm thick screed bed or bedding layer in CM 1:6 floor finished even & rough to recievr tiling/floor finish complete all as specified and as directed.

Non skid ceramic colour joint free tiles (1st quality) 6 to 7 mm thick of size area exc 0.11Sqm but nexc 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed Make : Kajaria/Somany/Orientbell.

Non skid / mat finish ceramic colour tiles (1st quality) of size 300 mm x 300 mm and 7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed Make : Kajaria/Somany/Orientbell.

PCC solid building blocks 10 cm thick type B1 1:2:4 set in cement mortar (1:6) complete all as specified and as directed.

15mm thick rendering in CM 1:4 over stone masonary surfaces incl finishing the surface fair & rough to receive tiling etc complete all as specified and as directed.

Preperartion of newly plastered surfaces on wall and applying one coat of wall putty with fair finished and even surface and applying two coat of oil bound distemper complete all as specified & directed.

Complete removal of existing distempered surfaces of walls and applying two coats of oil emulsion distemper of white shade or other approved shade over two coat of birla white putty on plastered surface including prepration all as specified and as directed.

Two coats of cement based paint on newly plastered surfaces of walls after necessary preparation of surfaces over one coat of primer complete all as specified and as directed.

One coat of cement based paint on walls after necessary preparation of old surfaces complete all as specified and as directed.

Prepration of surface and applying one coats of synthetic enamel paint on old painted surface wooden surfaces of any description over 10 cm width or girth complete all as specified and as directed.

Prepration of surface and applying one coats of synthetic enamel paint on old steel surface of any description over 10 cm width or girth complete all as specified and as directed.

Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete all as specified and as directed.

Dismantling of existing PVC plain or corrugated sheeting any gauge / thickness as in roof complete all as directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as directed.

Snap grid frame work of powder coated pre-fabricated GI channel for false ceiling of size 600x600mm with ceiling board PVC laminated Gypsum board 8mm thick and fixed as per maufacture instructions incl as per sample kept in GE office complete all as specified and as directed.

Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

Anodised aluminium window and ventilator shutters, side hung type/sliding type with or without sash bars, aluminium sections weighing 0.55 kg/m including aluminium grill necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

Aluminum section body door closer hydraulic regulated designated universal type suitable for door shutters of 851 to 1000 mm in width and weigh between complete all as specified and as directed.

Taking down shutter of any description, exc. 1 Sqm but n exc 2 Sqm each complete all as specified and as directed.

Taking down shutter of any description, exc. 1 Sqm but n exc 2 Sqm re-fixing in the same opening after necessary repair like easing etc. complete all as specified and as directed.

Mild steel frame work as in stairs ,hand rails half round or other stock section or section or core for wooden hand rail straidgt portion drilled and countershunk for balusters running bars for doors balusters nosing to steps including embeded in concrete and screwing etc hid ties for foof including securing bolts post and struts in fencing including securing bolts post and struts in fencing including cutting tops to shape as directed drilling holes nothing for wire etc flat iron fillet for necessary drilling boltinh or riveting etc and similar work confirming to Fe 410-0 or fe 310-0 complete all as specified and as directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

Solid PVC door frame of size 50x47mm made out of 5mm thick pvc sheet reinforced with MS square tube complete all as specified and as directed.

Aluminium anodized,tower bolt 200 mm long complete all as specified and as directed.

Aluminum anodised handle extruded section of size 150mm long complete all as specified and as directed.

Aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete all as specified and as directed.

Stainless steel butt hinges 100 mm size complete all as specified and as directed.

Machine made precast cement concrete blocks (interlocking pavers) of 60mm thick with 6mm top layers of ante abrasive rubberised material laid over 25mm thick sand cushion . The interlocking joints shall be filled with fine sand. The compressive strength of layer shall not be less than 350 Kg/Cm2 complete all as specified and as directed.

Dismantling water tanks of capacity exc 250 ltrs but.nexc 500 ltrs and removing to store complete all as specified and as directed.

Rotational moulded polythene water storage tanks triple layer (white) (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I capacity of tank 500 ltrs including tank led cover complete with fixing arrangement complete all as specified and as directed. Make : Sintex (Pure)/Rotex/Polytuff.

All as per Item No 111 above but cap of 1000 ltrs complete all as specified and as directed.

Disconnecting of old serviceable PVC tank setting aside (or lowering if required) including repair cleaning etc and hoisted in same location including reconnection and refixing for proper functioning of over head tank complete all as directed.

20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

50mm thich PCC (1:2:4)Type B-1 using 20 mm graded crushed stone aggregate for water tank plinth all as specified and directed.

Excavation in trenches for foundation n.exc 1.5m width and n.exc 1.5m in depth & getting out in any type of soil complete all as specified and as directed.

Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm thick complete all as specified and as directed.

Removing excavated material to a level n.exc 1.5 m above the starting point complete all as specified and as directed.

Sand filling under floors or foundation spreading and levelling in layer n exc 25 cm thick well ramming including watering and consolidation complete all as specified and as directed

Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Extra over for hammer dressing to face stone with max depression on face from a streight edge not exc squarred rubble dressing face beds and joints as specified to squarred rubble complete all as specified and as directed.

Roughly squared stone lintels hammer dressed on face and soffits hoisted set and pointed in CM (1:6) complete n,exc 3m in length complete all as specified and as directed.

Rendering 5 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc finished even & smooth complete all as specified and as directed.

75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate ) as in sub base in plinth protection complete all as specified and as directed.

50 mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection complete all as specified and as directed.

25 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia complete all as specified and as directed.

20 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25/20mm dia complete all as specified and as directed.

15 mm dia angular stop cock with chromium plated long thread with flange complete all as specified and as directed.

15mm bore stop valves cast copper alloy, screwed high pressure with crutch or butterly handle screwed both ends iron pipe & fixed complete all as specified and as directed.

15mm bore bib taps , cast copper alloy with crutch or butter fly handle screed for iron pipe and fixed complete all as specified and as directed.

PVC SWR pipes single socketed in any length with rubber rings joints laid in trenches or in floors 110mm complete all as specified and as directed.

All as per item No 131 above but fixed in wall complete all as specified and as directed.

PVC SWR pipes single socketd in any length with rubber rings joints laid in trenches or in floors 75mm complete all as specified and as directed.

All as per item No 133 above but fixed in wall complete all as specified and as directed.

PVC (SWR) branch pieces single socketed Y equal or unequal 110mm complete all as specified and as directed.

110 mm PVC (SWR) branch pieces single socketed T equal or unequal complete all as specified and as directed.

PVC (SWR) bends any radius 110mm complete all as specified and as directed.

All as per item No 137 above but 75mm dia with oval acess door complete all as specified and as directed.

PVC SWR vent cowl 110mm complete all as specified and as directed.

PVC SWR vent cowl 75mm complete all as specified and as directed.

PVC SWR floor trap plain grating including jointing with solvent cement 75mm dia complete all as specified and as directed.

(SWR) guly trap 125/110mm setting and jointing with solvent cement complete all as specified and as directed.

Ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm-210gms complete all as specified and as directed.

Stainless steel butt hinges 100 mm size complete all as specified and as directed.

150mm long aluminium anodised handle fabricated type complete all as specified and as directed.

Vitreous china wash basin white flat back 550x400mm including bracket complete all as specified and as directed.

15mm dia pillar taps cast copper alloy with capstan heads, cromium plated screwed down high pressure with or without lettered Hot or Cold with long screw shanks and fly -nuts screwed for iron pipe and fixed complete all as specified and as directed.

Supply only 10 litres, Pvc valveless syphonic action type, flushing cistern high level with inlet ball valve, float complete all as specified and as directed Make : Hindware/Parryware/Cera.

15 mm bore CP brass two way angular stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle scrwed both ends for iorn pipe fixed in repair complete all as specified and as directed Make : Jaquar/Cera/Marc.

Bidet spray (Health faucet) with 1 meter PVC tube and holder, complete all as specified and as directed. Make Jaquar/Cera/Marc.

Vitreous china wash down water closet Anglo Indian type pedestal pattern with seat & cover with jet spray complete incl fixing of flush pipe etc complete all as specified and as directed Make : Hindware/Parryware/Cera.

Vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPE pipe etc complete all as specified and as directed Make : Hindware/Parryware/Cera.

Chromium plated toilet paper holder Make : Johnson Cat No T0254C or equivalent in Cera/Parryware.

Vitreous china urinal full stall type colured bowl type (back or corner wall type) complete including providing and fixing plugs, waste pipe 32 mm dia , urinal spreader 15 mm dia ete in cement mortar 1:2 and fixing with and including brass screws 60 mm in length, complete all as specified and as directed Make : Hindware/Parryware/Cera.

PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

15mm dia CP fancy type stop valves, cast copper alloy screwed pressure, screwed both ends for iron pipe for unions and fixed complete all as specified and as directed Make : Jaquar/Cera.

Salt-glazed stoneware drain pipes 150mm dia laid in trenches and jointed complete all as spacified and as directed.

M&L for concrete bed to drain pipes 150mm dia including packing under and hauching completely surrounding pipes with concrete after they are laid and tested; in Cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) complete all as specified and as directed.

Precast cement concrete,1:2:4 Type B-1 (using 20mm graded crushed stone aggregate) in slabs (for manholes etc.) set in CM 1:4 complete all as specified and as directed.

TMT steel bars 8mm dia , cut to llength, bend to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than .9 mm dia or securing with clips complete all as specified and as directed.

Towel rail 450mm long of PTMT fiexd with and including chromium plated brass screws and woodn cleats Min weight 170gms complete all as specified and as directed. Make : Polytuff.

Soap dish of PTMT fixed with screws complete all as specified and as directed. Make : Polytuff.

MS chromium plated peg set of five fixing with wall complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required complete all as specified and as directed.

PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channel and drain complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement, including forms, moulds, mitred stopped end etc complete all as specified and as directed.

Surface excavation n.exc 30 cm deep & avg 15 cm deep & getting out in any type of soil complete all as specified and as directed.

Treatment of soil top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed by Engr-in-Charge.

CP wall mixture 3 in-1 system including 1.50m long telephone shower and overhead shower of size 150x150mm with W.F. Note:- Wall mixture 3 in-1 CP including 1.5m long shower complete all as specified and as directed. Make : Jaquar/Cera/Marc.

Demiolition of reinforced cement concrete of as staircase, landing, chajjas and similar suspended work of any description and any position not otherwise complete all as specified and as directed.

Providing precast RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cover slab for man hloes set in CM 1:6 complete all as specified and as directed.

Taking down or up steel/water tubing and connection including cleaning for refixing or removal to store of following sizes :- (a) 25 mm dia

(b) 20 mm dia

(c ) 15 mm dia

GI water tubing, medium grade, galvanized, with all fittings fixed to wall complete all as specified and as directed. (a) 25 mm dia,

(b) 20 mm dia

(c ) 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc complete all as specified and as directed.

Point wiring complete with 1.5 sqmm, single core, multi stranded, copper conductor, PVC (FRLS), insulated, unsheathed cable, confirming to IS-694, 1100 volts grade, ISI marked (class V conductor), in and including PVC concealed conduit (MMS), ISI marked not less than 20mm, with accessories fixed on surface of wall/roof/ceiling etc and including sunken pressed steel terminal boxes in wall but including 3mm thick plastic laminated sheet top cover (ISI marked hylem sheet and 1.50 sqmm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for :- (a) One light point controlled by one, one way switch

(b) One fan /Exhaust fan, point controlled by one way switch.

(c) One socket outlet 3 pin 6 Amps on same board

(d) One socket outlet 3 pin 6 Amp on independent board

All as per item No 180 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board .

All as per item No 180 above but with 4 Sq mm single core multistanded copper conductor cable for sheet metal encls two pin operated with 20 amp MCB complete all as specified and as directed.

Switch flush type single pole one way 6 Amp ISI Marked Make :- ABB/ Havells/ Schneider.

Switch flush type single pole one way 16 Amp ISI Marked.Make :- ABB Havells/ Schneider.

Socket out let , 5 pin , 6 Amp FT.Make :- ABB/ Havells/ Schneider.

Socket out let , 3 pin ,16 Amp FT. ISI MarkedMake :- ABB/ Havells/ Schneider.

Switch type stepped type electonic fan regulator flush type , ISI Marked.Make :- ABB Havells/ Schneider.

Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body Make :- ABB/Havells/Schneider.

LED lights fitting 1x 20 watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-charge. Make Crompton/Havells/ Philips

Insulated Batton lamp holder metal cased body of brass with back plate suitable for batton fittings including 9 watt LED Lamps ISI Marked.

Connecting, and commissioning of street light fitting 45 watt LED , IP-65 protection, single peice pressure dia cast aluminium alloy housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and contror gear compartment with high voltage surge protection device upto 4.5 KV, Prewired including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified and as directed. Make : CG /Havell,s/ Philips.

Sub main wiring with 6.00 Sq mm single core multistrandred copper conductor PVC insulated and unsheathed cable passing through PVC concealed conduit and making good the distrurbed surface of wall inc 4 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire. Note :- Two runs of cable 6 Sqmm and One run of 4 Sqmm shall be measured as unit length. Make :- Polycab/Havells/ Finolex

Prewired distribution board in sheet metal with 200 Amps rated copper bus bar Confirming to relevant IS.SPN 8 way, Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface Make;-Legrand/ABB/Havell's.

Distribution board in sheet metal with 200 Amps rated copper bus bar Confirming to relevant IS.SPN 4 way, Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface. Make;-Legrand/ABB/Havell's

Storage water heater (Geyser) of 25 ltr capacity including grouting of four Nos fashners with nut,bolts & washers of suitable size as directed in wall and making good in the disturbed surface and match with existing surface complete including all electric and water supply connections all as specified and directed by Engr-in-charge. Make CG/Havells/Philips.

Supply and laying or fixing or passing through pipe 1100volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire and overall PVC Sheathed 10 sq 2 core in service connection. Make : polycab/Havells/Finolex

Sheet metal enclsoure with plug socket single pole and neutral enclosure with two pin earth plug complete with one MCB 20 amp SP complete all as specified and directed. Make :- Legrand/ ABB/Schneider.

Prewired distribution board in sheet metal Prewired when MCB to be used with 200 Amps rated copper bus bar Confirming to relevant IS TPN 4 way, Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface. Make;-Legrand/ABB/Havell's

MCB Single pole 5 to 30 Amp, 10 kA, ISI Marked.Make;-Legrand/ABB/Schneider.

MCB Double pole RCBO 40 Amp, 100mA, ISI Marked.Make;-Legrand/ABB/Schneider.

MCB SPN 40 Amp, 10 kA, ISI Marked.Make;-Legrand/ABB/Schneider.

MCB SPN 63 Amp, 10 kA, ISI Marked.Make;-Legrand/ABB/Schneider.

MCCB T PN 63 Amp, 10 kA, ISI Marked.Make;-Legrand/ABB/Schneider.

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 3 connected to Earthing test point all as specified or indicated including testing on completion Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover etc complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia complete all as specified and as directed.

Down light 2' x2' LED flat panel (recess type) suitable for arm strong/grid/POP ceiling complete with separate electronic driver & high brightness diffused type complete all as specified and directed by engr-in charge. Make: Crompton/Havells/Philips

Supply and laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 3.5 core. Make polycab/Havells/Finolex

Harsh Enterprises

BEYLIM INFRA